UdpSrc?

[killerrats]

Ethernet 1
Ethernet 2

I have a multi interfaces on my windows machine. I was wanting to get the
Udpsrc to use a specific ethernet but doesn't seem to work. I can join the
multicast network but the only way to do it, would be to disable the card
that doesn't go to that network. Then enable it after i join. So if Ethernet
2 is the one to join and work and the Ethernet 1 is the one that is for
internet. If I have Ethernet 2 disabled and then windows will try to join
the network on Ethernet 1. But if i re-enable the Ethernet 2 it will still
try Ethernet 1 until I disable Ethernet 1 again. Any ideas?

[Video iP] = 232.232.232.0
[Ethernet] = 10.0.0.1

gst-launch-1.0 --gst-debug="*udpsrc,6" udpsrc multicast-iface="Ethernet 2"
address=[Video iP] port=61454
caps=application/x-rtp,media=video,payload=90000 ! rtpmp4vdepay !
mpeg4videoparse ! avdec_mpeg4 ! d3dvideosink sync=false



-----
------------------------------
Gstreamer 1.14.3
------------------------------
Windows
--
Sent from: http://gstreamer-devel.966125.n4.nabble.com/