Internal data stream error

[Nick Kitchel]

Hello,

I'm trying to get decklinkvideosrc to work with x264enc and mp4mux but seem to be getting stuck. I've been messing around with the caps but can't get it working correctly.

When I run this command line: gst-launch-1.0 decklinkvideosrc connection=sdi ! videoconvert ! x264enc ! video/x-h264, width=720, height=486, framerate=30000/1001 ! mp4mux ! filesink location=decklinkCapture.mov -v

I get this output :

Setting pipeline to PAUSED ...
Pipeline is live and does not need PREROLL ...
/GstPipeline:pipeline0/GstDecklinkVideoSrc:decklinkvideosrc0: hw-serial-number =
Setting pipeline to PLAYING ...
New clock: GstSystemClock
/GstPipeline:pipeline0/GstDecklinkVideoSrc:decklinkvideosrc0.GstPad:src: caps = video/x-raw, width=(int)720, height=(int)486, pixel-aspect-ratio=(fraction)10/11, interlace-mode=(string)interleaved, framerate=(fraction)30000/1001, field-order=(string)bottom-field-first, format=(string)UYVY, colorimetry=(string)bt601, chroma-site=(string)mpeg2
/GstPipeline:pipeline0/GstVideoConvert:videoconvert0.GstPad:src: caps = video/x-raw, width=(int)720, height=(int)486, framerate=(fraction)30000/1001, format=(string)Y42B, pixel-aspect-ratio=(fraction)10/11, interlace-mode=(string)interleaved, field-order=(string)bottom-field-first
Redistribute latency...
/GstPipeline:pipeline0/GstX264Enc:x264enc0.GstPad:sink: caps = video/x-raw, width=(int)720, height=(int)486, framerate=(fraction)30000/1001, format=(string)Y42B, pixel-aspect-ratio=(fraction)10/11, interlace-mode=(string)interleaved, field-order=(string)bottom-field-first
/GstPipeline:pipeline0/GstVideoConvert:videoconvert0.GstPad:sink: caps = video/x-raw, width=(int)720, height=(int)486, pixel-aspect-ratio=(fraction)10/11, interlace-mode=(string)interleaved, framerate=(fraction)30000/1001, field-order=(string)bottom-field-first, format=(string)UYVY, colorimetry=(string)bt601, chroma-site=(string)mpeg2
Redistribute latency...
/GstPipeline:pipeline0/GstDecklinkVideoSrc:decklinkvideosrc0: signal = false
WARNING: from element /GstPipeline:pipeline0/GstDecklinkVideoSrc:decklinkvideosrc0: No signal
Additional debug info:
gstdecklinkvideosrc.cpp(1118): gst_decklink_video_src_create (): /GstPipeline:pipeline0/GstDecklinkVideoSrc:decklinkvideosrc0:
No input source was detected - video frames invalid
/GstPipeline:pipeline0/GstDecklinkVideoSrc:decklinkvideosrc0.GstPad:src: caps = video/x-raw, width=(int)1280, height=(int)720, pixel-aspect-ratio=(fraction)1/1, interlace-mode=(string)progressive, framerate=(fraction)60000/1001, format=(string)UYVY, colorimetry=(string)bt709, chroma-site=(string)mpeg2
Redistribute latency...
/GstPipeline:pipeline0/GstDecklinkVideoSrc:decklinkvideosrc0: signal = true
INFO:
gstdecklinkvideosrc.cpp(1125): gst_decklink_video_src_create (): /GstPipeline:pipeline0/GstDecklinkVideoSrc:decklinkvideosrc0:
Input source detected
ERROR: from element /GstPipeline:pipeline0/GstDecklinkVideoSrc:decklinkvideosrc0: Internal data stream error.
Additional debug info:
gstbasesrc.c(3072): gst_base_src_loop (): /GstPipeline:pipeline0/GstDecklinkVideoSrc:decklinkvideosrc0:
streaming stopped, reason not-negotiated (-4)
Execution ended after 0:00:00.145124701
Setting pipeline to NULL ...
Freeing pipeline ...

I'm not sure where the caps are going wrong. Any help would be appreciated. Also is there any place where I can see what encoders go with specific muxers? It seems I just have to google the element and hope the results is good enough to show me what else I can use with it.

Thanks,
Nick
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/gstreamer-devel/attachments/20230208/ee32b7c2/attachment.htm>