[gst-embedded] Gstreamer cross compilation doubt

[Niamathullah sharief]

yes i tried to compile glib and i got error in that.

*checking for msgfmt... no
configure: error:
*** You must have either have gettext support in your C library, or use the
*** GNU gettext library. (http://www.gnu.org/software/gettext/gettext.html

Configuration of glib library has failed*

   So after that i downloaded gettext and tried to cross compile that.but i
am getting some errors in that

*mbuiter.h:112: error: expected specifier-qualifier-list before 'mbstate_t'*
*
**mbuiter.h: In function 'mbuiter_multi_next':**
**mbuiter.h:126: error: 'struct mbuiter_multi' has no member named
'next_done'**
**mbuiter.h:131: error: 'struct mbuiter_multi' has no member named 'cur'**
**mbuiter.h:136: error: 'struct mbuiter_multi' has no member named 'cur'**
**mbuiter.h:137: error: 'struct mbuiter_multi' has no member named 'cur'**
**mbuiter.h:137: error: 'struct mbuiter_multi' has no member named 'cur'**
**mbuiter.h:138: error: 'struct mbuiter_multi' has no member named 'cur'*
*mbuiter.h:142: error: 'struct mbuiter_multi' has no member named 'state'
mbuiter.h:145: error: 'struct mbuiter_multi' has no member named 'cur'
mbuiter.h:145: error: 'struct mbuiter_multi' has no member named 'cur'
mbuiter.h:145: error: 'struct mbuiter_multi' has no member named 'cur'
mbuiter.h:146: error: 'struct mbuiter_multi' has no member named 'cur'
mbuiter.h:147: error: 'struct mbuiter_multi' has no member named 'state'
mbuiter.h:148: error: 'struct mbuiter_multi' has no member named 'cur'
mbuiter.h:151: error: 'struct mbuiter_multi' has no member named 'cur'
mbuiter.h:152: error: 'struct mbuiter_multi' has no member named 'cur'
mbuiter.h:156: error: 'struct mbuiter_multi' has no member named 'cur'
mbuiter.h:159: error: 'struct mbuiter_multi' has no member named 'cur'
mbuiter.h:159: error: 'struct mbuiter_multi' has no member named 'cur'
mbuiter.h:160: error: 'struct mbuiter_multi' has no member named 'cur'
mbuiter.h:166: error: 'struct mbuiter_multi' has no member named 'cur'
mbuiter.h:169: error: 'struct mbuiter_multi' has no member named 'cur'*
*mbuiter.h:170: error: 'struct mbuiter_multi' has no member named 'cur'
mbuiter.h:171: error: 'struct mbuiter_multi' has no member named 'cur'
mbuiter.h:173: error: 'struct mbuiter_multi' has no member named 'cur'
mbuiter.h:177: error: 'struct mbuiter_multi' has no member named 'state'
mbuiter.h:181: error: 'struct mbuiter_multi' has no member named 'next_done'
mbuiter.h: In function 'mbuiter_multi_reloc':
mbuiter.h:187: error: 'struct mbuiter_multi' has no member named 'cur'
mbuiter.h: In function 'mbuiter_multi_copy':
mbuiter.h:194: error: 'struct mbuiter_multi' has no member named 'state'
mbuiter.h:194: error: 'const struct mbuiter_multi' has no member named
'state'
mbuiter.h:194: error: 'mbstate_t' undeclared (first use in this function)
mbuiter.h:194: error: (Each undeclared identifier is reported only once
mbuiter.h:194: error: for each function it appears in.)
mbuiter.h:196: error: 'struct mbuiter_multi' has no member named 'state'*
*mbuiter.h:197: error: 'struct mbuiter_multi' has no member named
'next_done'
mbuiter.h:197: error: 'const struct mbuiter_multi' has no member named
'next_done'
mbuiter.h:198: error: 'struct mbuiter_multi' has no member named 'cur'
mbuiter.h:198: error: 'const struct mbuiter_multi' has no member named 'cur'
mbslen.c: In function 'mbslen':
mbslen.c:40: error: 'mbui_iterator_t' has no member named 'cur'
mbslen.c:40: error: 'mbui_iterator_t' has no member named 'state'
mbslen.c:40: error: 'mbstate_t' undeclared (first use in this function)
mbslen.c:40: error: 'mbui_iterator_t' has no member named 'next_done'*
*mbslen.c:40: error: 'mbui_iterator_t' has no member named 'cur'
mbslen.c:40: error: 'mbui_iterator_t' has no member named 'cur'
mbslen.c:40: error: 'mbui_iterator_t' has no member named 'cur'
mbslen.c:40: error: 'mbui_iterator_t' has no member named 'cur'
mbslen.c:40: error: 'mbui_iterator_t' has no member named 'next_done'
make[4]: *** [mbslen.o] Error 1
make[4]: Leaving directory
`/home/sharief/Desktop/libraries/gettext-0.17/gettext-runtime/gnulib-lib'
make[3]: *** [all] Error 2
make[3]: Leaving directory
`/home/sharief/Desktop/libraries/gettext-0.17/gettext-runtime/gnulib-lib'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory
`/home/sharief/Desktop/libraries/gettext-0.17/gettext-runtime'
make[1]: *** [all] Error 2
make[1]: Leaving directory
`/home/sharief/Desktop/libraries/gettext-0.17/gettext-runtime'
make: *** [all-recursive] Error 1
Building of glib library has failed*

    Now i am confused.


On Mon, Dec 28, 2009 at 2:00 AM, Vincent Torri <vtorri at univ-evry.fr> wrote:

>
>
> On Sun, 27 Dec 2009, Niamathullah sharief wrote:
>
>  Thanks for your valuable information. Thanks a lot. I have an another
>> doubt
>> what is this "WINCE_PATH is where i install the cross compiled
>> libraries/programs." mean?
>>
>
> make install copies the necessary files in a path. It is that path.
>
>
>  whether you are telling about cross compiling libraries like libxml2,glib
>> etc..?or any other libraries?
>>
>
> cross compiling libraries, of course
>
>
>  if yes where we have to keep that libraries? and where is this
>> "pkg-config:
>> file exist?i didnt hve any file like that?what is the content of that
>> file?from where i can get that file?please tell me
>>
>
> try to compile glib-2.0 first.
>
> Vincnet Torri
>
>
>  And the main thing is whether this gst-plugin base is required while
>> compiling this gstreamer i mean whether we have to use some libraries and
>> some codecs file whle compiling gstreamer?or both are seperate one?
>> Thank a lot in advance
>>
>> On Sun, Dec 27, 2009 at 6:33 PM, Vincent Torri <vtorri at univ-evry.fr>
>> wrote:
>>
>>
>>>
>>> On Sun, 27 Dec 2009, Niamathullah sharief wrote:
>>>
>>>  what about that script which i have sent...is that correct?
>>>
>>>>
>>>>
>>> imho it is *too* complicated. For cross compilation for Windows CE, i use
>>> the following script:
>>>
>>> #! /bin/sh
>>>
>>> export MINGW32CE_PATH=$HOME/local/opt/mingw32ce
>>> export WINCE_PATH=$HOME/local/wince
>>>
>>> export PATH=$CEGCC_PATH/bin:$MINGW32CE_PATH/bin:$PATH
>>> export CPPFLAGS="-I$WINCE_PATH/include"
>>> export LDFLAGS="-L$WINCE_PATH/lib"
>>> export LD_LIBRARY_PATH="$WINCE_PATH/bin"
>>> export PKG_CONFIG_PATH="$WINCE_PATH/lib/pkgconfig"
>>>
>>> I save it in a file named mingw32ce.sh. To use it, in a terminal i launch
>>> it, only once, with:
>>>
>>> source /path/to/mingw32ce.sh
>>>
>>> MINGW32CE_PATH is where the cross compilation tool chain is located.
>>> WINCE_PATH is where i install the cross compiled libraries/programs.
>>>
>>> Then I update some necessary variables with the 2 variables above. PATH,
>>> of
>>> course, plus other compilation env var. I think that you should also add
>>> CFLAGS and CXXFLAGS for optimizations (like in your script).
>>>
>>> to configure a library:
>>>
>>> ./configure --host=arm-mingw32ce --prefix=$WINCE_PATH
>>>
>>>
>>> I don't put the launch of ./configure in script, like your script, for
>>> some
>>> reasons. I would suggest that you also don't put it in your script.
>>>
>>> For the compilation of gstreamer, compile and install for your target:
>>>
>>> 1) dependencies of glib-2.0 (ask in the glib related mailing lists for
>>> that)
>>> 2) glib-2.0
>>> 3) gstreamer without libxml2
>>>
>>> if you succeed, you can try gst-plugins-base.
>>>
>>> Vincent Torri
>>>
>>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/gstreamer-embedded/attachments/20091228/c28194e4/attachment.htm>