[Gstreamer-openmax] Does gstopenmax have plan to update omxil to Bellagio 0.9. x?
Giulio URLINI
giulio.urlini at st.com
Mon Oct 13 02:35:22 PDT 2008
Hi,
now it seems that your alsa driver has some problems.
Unfortunately I didn't encounter this problem so I can't clarify.
Try the option -o outfile to avoid the error and check the decoder only.
I forward your mail also to the Bellagio mailing list, so that hopefully
someone can add a comment.
--
Giulio Urlini
xuefeng wang wrote:
> Hi,
>
> Having the following result. Is it OK?
>
> ./omxaudiodectest wind_adif_lc_mono_12kbps_8000hz.aac
> Options selected:
> Decode file wind_adif_lc_mono_12kbps_8000hz.aac to ALSA sink without
> tunneling
> Format selected AAC
> ------------------------------------
> GENERAL TEST test_OMX_ComponentNameEnum
> component 0 is OMX.st.clocksrc
> component 1 is OMX.st.audio_decoder.mp3.mad
> component 2 is OMX.st.audio_filereader
> component 3 is OMX.st.alsa.alsasink
> component 4 is OMX.st.alsa.alsasrc
> component 5 is OMX.st.parser.3gp
> component 6 is OMX.st.volume.component
> component 7 is OMX.st.audio.mixer
> component 8 is OMX.st.audio_decoder
> component 9 is OMX.st.audio_decoder.mp3
> component 10 is OMX.st.audio_decoder.ogg
> component 11 is OMX.st.audio_decoder.aac
> component 12 is OMX.st.audio_decoder.g726
> component 13 is OMX.st.video_decoder
> component 14 is OMX.st.video_decoder.mpeg4
> component 15 is OMX.st.video_decoder.avc
> component 16 is OMX.st.video_colorconv.ffmpeg
> component 17 is OMX.st.video_encoder
> component 18 is OMX.st.audio_decoder.ogg.single
> GENERAL TEST test_OMX_ComponentNameEnum result -2147479538
> ------------------------------------
> GENERAL TEST test_OMX_RoleEnum
> The number of roles for the component OMX.st.audio_decoder is: 4
> The role 1 for the component: audio_decoder.mp3
> The role 2 for the component: audio_decoder.ogg
> The role 3 for the component: audio_decoder.aac
> The role 4 for the component: audio_decoder.g726
> GENERAL TEST test_OMX_RoleEnum result 0
> ------------------------------------
> GENERAL TEST test_OMX_ComponentEnumByRole
> Getting number of components per role for audio_decoder.ogg
> Number of components per role for audio_decoder.ogg is 2
> The components are:
> OMX.st.audio_decoder
> OMX.st.audio_decoder.ogg.single
> GENERAL TEST test_OMX_ComponentEnumByRole result OMX_ErrorNone
> ------------------------------------
> GENERAL TEST test_OpenClose
> GENERAL TEST test_OpenClose result 0
> ------------------------------------
> Component OMX.st.audio_decoder.aac opened
> lt-omxaudiodectest: pcm_params.c:2351: sndrv_pcm_hw_params: Assertion
> `err >= 0' failed.
> Aborted
>
>
> */Giulio URLINI <giulio.urlini at st.com>/* 写道：
>
> Hi,
> to compile the test you should execute 'make check'.
> For any further details please check the README file in the root
> directory of Bellagio package.
>
>
> Giulio Urlini
>
> xuefeng wang wrote:
> > Hi,
> >
> > ffmpeg version:
> > libavutil version: 49.7.0
> > libavcodec version: 51.62.0
> > libavformat version: 52.18.0
> > libavdevice version: 52.0.0
> > faac-1.26
> > faad2-2.6.1
> >
> > I want to run openmax stand alone demo, could you test how to
> make it?
> > I tried to make, but the test program couldn't be created, please
> see
> > the log below:
> >
> > make[2]: Leaving directory
> > `/home/w20711/oss/libomxil-bellagio-0.9.0/test/components/common'
> > Making all in audio
> > make[2]: Entering directory
> > `/home/w20711/oss/libomxil-bellagio-0.9.0/test/components/audio'
> > make[2]: Nothing to be done for `all'.
> > make[2]: Leaving directory
> > `/home/w20711/oss/libomxil-bellagio-0.9.0/test/components/audio'
> > Making all in video
> > make[2]: Entering directory
> > `/home/w20711/oss/libomxil-bellagio-0.9.0/test/components/video'
> > make[2]: Nothing to be done for `all'.
> > make[2]: Leaving directory
> > `/home/w20711/oss/libomxil-bellagio-0.9.0/test/components/video'
> > Making all in audio_effects
> > make[2]: Entering directory
> >
> `/home/w20711/oss/libomxil-bellagio-0.9.0/test/components/audio_effects'
> > make[2]: Nothing to be done for `all'.
> > make[2]: Leaving directory
> >
> `/home/w20711/oss/libomxil-bellagio-0.9.0/test/components/audio_effects'
> > Making all in parser
> > make[2]: Entering directory
> > `/home/w20711/oss/libomxil-bellagio-0.9.0/test/components/parser'
> > make[2]: Nothing to be done for `all'.
> > make[2]: Leaving directory
> > `/home/w20711/oss/libomxil-bellagio-0.9.0/test/components/parser'
> > Making all in camera
> > make[2]: Entering directory
> > `/home/w20711/oss/libomxil-bellagio-0.9.0/test/components/camera'
> > make[2]: Nothing to be done for `all'.
> > make[2]: Leaving directory
> > `/home/w20711/oss/libomxil-bellagio-0.9.0/test/components/camera'
> > make[2]: Entering directory
> > `/home/w20711/oss/libomxil-bellagio-0.9.0/test/components'
> > make[2]: Nothing to be done for `all-am'.
> > make[2]: Leaving directory
> > `/home/w20711/oss/libomxil-bellagio-0.9.0/test/components'
> > make[1]: Leaving directory
> > `/home/w20711/oss/libomxil-bellagio-0.9.0/test/components'
> > make[1]: Entering directory
> `/home/w20711/oss/libomxil-bellagio-0.9.0/test'
> > make[1]: Nothing to be done for `all-am'.
> > make[1]: Leaving directory
> `/home/w20711/oss/libomxil-bellagio-0.9.0/test'
> >
> >
> >
> >
> > */Giulio URLINI /* 写道：
> >
> > Hi,
> > I'm Giulio Urlini and I'm responsible for the Bellagio
> development. In
> > my opinion this is not a problem of the relation between
> gstreamer and
> > openmax but a decoding error inside the openmax audio decoder.
> > The error in this case seems to be related to faac version that
> does not
> > match. Which version of ffmpeg are you using?
> > Did you try to run the openmax stand alone demo, in
> > tests/components/audio/omxaudiodectest?
> >
> > --
> > Giulio Urlini
> >
> >
> > xuefeng wang wrote:
> > > Hi Felipe Contreras,
> > >
> > > Thank you very much.
> > >
> > > It works with "./gst-launch-0.10 filesrc
> > > location=./music/matrix_128_96_MPEG-4_15fps_64kbps.mp4 ! qtdemux
> > > ! omx_mpeg4dec ! ffmpegcolorspace ! videoscale ! ximagesink" while
> > > turning off the TI workarounds.
> > >
> > > Another issue is found by "gst-openmax-0.10.0.4 +
> > > libomxil-bellagio-0.9.0" (cannot reproduce by
> > "gst-openmax-0.10.0.4 +
> > > libomxil-B-0.3.3"):
> > >
> > > ./gst-launch-0.10 filesrc
> > >
> >
> location=./music/matrix_mp4sp_176x144_15fps_aaclc_44100hz_s_164kbps.mp4
> > > ! qtdemux name=demux demux. ! queue ! omx_aacdec ! audioconvert !
> > > audioresample ! volume ! osssink demux. ! queue ! omx_mpeg4dec !
> > > ffmpegcolorspace ! videoscale ! ximagesink
> > >
> > > [libfaad @ 0x8606a50]faac: frame decoding failed: Bitstream value
> > not
> > > allowed by specification
> > > OMX-error in packet decoding in audio dcoder
> > > [libfaad @ 0x8606a50]faac: frame decoding failed: Bitstream value
> > not
> > > allowed by specification
> > > OMX-error in packet decoding in audio dcoder
> > >
> > >
> > >
> > >
> > > */Felipe Contreras /* 写道：
> > >
> > > On Thu, 2008-10-09 at 15:08 +0800, ext xuefeng wang wrote:
> > > > I have the following issue:
> > > >
> > > > ./gst-launch-0.10 filesrc
> > > > location=./music/matrix_128_96_MPEG-4_15fps_64kbps.mp4 !
> qtdemux !
> > > > omx_mpeg4dec ! ffmpegcolorspace ! videoscale ! ximagesink
> > > > Setting pipeline to PAUSED ...
> > > > Pipeline is PREROLLING ...
> > > > ** (gst-launch-0.10:17245): WARNING **: ffmpegcsp0: size 18432
> > is not
> > > > a multiple of unit size 24576
> > > > ERROR: from element /pipeline0/ffmpegcsp0: subclass did not
> specify
> > > > output size
> > > > Additional debug info:
> > > > gstbasetransform.c(1537): gst_base_transform_handle_buffer
> > > > (): /pipeline0/ffmpegcsp0:
> > > > subclass did not specify output size
> > > > ERROR: pipeline doesn't want to preroll.
> > > > Setting pipeline to NULL ...
> > > > Caught SIGSEGV accessing address 0x3c
> > > > #0 0x00110402 in _start () from /lib/ld-linux.so.2
> > > > #1 0x008c0119 in ?? ()
> > > > #2 0x00000000 in ?? ()
> > > > Spinning. Please run 'gdb gst-launch 17245' to continue
> debugging,
> > > > Ctrl-C to quit, or Ctrl-\ to dump core.
> > >
> > > Can you try turning off the TI workarounds?
> > > omx/gstomx_base_videodec.c:omx_setup
> > >
> > > --
> > > Felipe Contreras
> > >
> > >
> > >
> >
> ------------------------------------------------------------------------
> > > 雅虎邮箱，您的终生邮箱！
> > >
> > >
> > >
> >
> ------------------------------------------------------------------------
> > >
> > >
> >
> -------------------------------------------------------------------------
> > > This SF.Net email is sponsored by the Moblin Your Move
> > Developer's challenge
> > > Build the coolest Linux based applications with Moblin SDK & win
> > great prizes
> > > Grand prize is a trip for two to an Open Source event anywhere in
> > the world
> > > http://moblin-contest.org/redirect.php?banner_id=100&url=/
> > >
> > >
> > >
> >
> ------------------------------------------------------------------------
> > >
> > > _______________________________________________
> > > Gstreamer-openmax mailing list
> > > Gstreamer-openmax at lists.sourceforge.net
> > > https://lists.sourceforge.net/lists/listinfo/gstreamer-openmax
> >
> >
> >
> ------------------------------------------------------------------------
> > 雅虎邮箱，您的终生邮箱！
>
>
> ------------------------------------------------------------------------
> 雅虎邮箱，您的终生邮箱！ <http://cn.mail.yahoo.com/>
More information about the Gstreamer-openmax
mailing list