Specific Hardware problems
Colin Kupris
c.kupris at sms.ed.ac.uk
Fri Dec 2 13:46:58 PST 2005
Andrey Borzenkov wrote:
> please give full lshal ouput after camera is plugged. It may be the same
I m going to assume that you mean the full lshal output for the device
in question not *all* of the output from lshal.
udi = '/org/freedesktop/Hal/devices/storage_model_QV_DigitalCamera'
info.addons = {'hald-addon-storage'} (string list)
block.storage_device =
'/org/freedesktop/Hal/devices/storage_model_QV_DigitalCamera' (string)
info.udi =
'/org/freedesktop/Hal/devices/storage_model_QV_DigitalCamera' (string)
storage.requires_eject = false (bool)
storage.hotpluggable = false (bool)
info.capabilities = {'storage', 'block'} (string list)
info.category = 'storage' (string)
info.product = 'QV DigitalCamera' (string)
info.vendor = 'Casio' (string)
storage.removable = true (bool)
storage.physical_device =
'/org/freedesktop/Hal/devices/usb_device_7cf_1001_noserial_scsi_host_scsi_device_lun0'
(string)
storage.lun = 0 (0x0) (int)
storage.drive_type = 'disk' (string)
storage.vendor = 'Casio' (string)
storage.model = 'QV DigitalCamera' (string)
storage.automount_enabled_hint = true (bool)
storage.media_check_enabled = true (bool)
storage.no_partitions_hint = false (bool)
storage.bus = 'scsi' (string)
block.is_volume = false (bool)
block.minor = 0 (0x0) (int)
block.major = 8 (0x8) (int)
block.device = '/dev/sda' (string)
linux.hotplug_type = 3 (0x3) (int)
info.parent =
'/org/freedesktop/Hal/devices/usb_device_7cf_1001_noserial_scsi_host_scsi_device_lun0'
(string)
linux.sysfs_path_device = '/sys/block/sda' (string)
linux.sysfs_path = '/sys/block/sda' (string)
Thanks
ck
More information about the hal
mailing list