hal not recognizing SCSI card

f1 f1 at micromemory.com
Tue Dec 20 18:56:27 PST 2005


Hi,

I've got a RAID card that wasn't recognized by the HAL.
Adaptec 2100S 32bit Ultra160 SCSI RAID Controller

It has two drives that I've mirrored with the controller BIOS, but FC4
only sees two individual drives.

lspci reports this:
02:02.1 I2O: Adaptec (formerly DPT) SmartRAID V Controller (rev 02)

=====================================================================
[root@~]# fdisk -l

Disk /dev/hda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/hda1   *           1          13      104391   83  Linux
/dev/hda2              14         144     1052257+  82  Linux swap /
Solaris
/dev/hda3             145        4865    37921432+  83  Linux

Disk /dev/sda: 73.4 GB, 73407865856 bytes
255 heads, 63 sectors/track, 8924 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1        8924    71681998+  83  Linux

Disk /dev/sdb: 73.4 GB, 73407820800 bytes
255 heads, 63 sectors/track, 8924 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1        8924    71681998+  83  Linux






More information about the hal mailing list