Platform: Linux testserver 2.6.16.21-0.8-smp i586

[Thayne Harmon]

Platform: Linux testserver 2.6.16.21-0.8-smp i586

HAL does not show devices created by the BLOCK subsystem, that is register_blkdev, alloc_disk, add_disk.
In sysfs these show up under /sys/block/ with no association to a Host Bus Adapter.

No devices show up for this adapter, yet there are two connected.

udi = '/org/freedesktop/Hal/devices/pci_e11_b178'
  info.bus = 'pci'  (string)
  info.linux.driver = 'cciss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Smart Array 5i/532'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_e11_b178'  (string)
  info.vendor = 'Compaq Computer Corporation'  (string)
  linux.hotplug_type = 1  (0x1)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:01/0000:01:01.0'  (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:01/0000:01:01.0'  (string)
  pci.device_class = 1  (0x1)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:01/0000:01:01.0'  (string)
  pci.product = 'Smart Array 5i/532'  (string)
  pci.product_id = 45432  (0xb178)  (int)
  pci.subsys_product = 'Smart Array 5i'  (string)
  pci.subsys_product_id = 16512  (0x4080)  (int)
  pci.subsys_vendor = 'Compaq Computer Corporation'  (string)
  pci.subsys_vendor_id = 3601  (0xe11)  (int)
  pci.vendor = 'Compaq Computer Corporation'  (string)
  pci.vendor_id = 3601  (0xe11)  (int)

/sys
|-- block
|   |-- cciss!c0d0
|   |   |-- cciss!c0d0p1
|   |   |   |-- dev
|   |   |   |-- size
|   |   |   |-- start
|   |   |   |-- stat
|   |   |   `-- uevent
|   |   |-- dev
|   |   |-- queue
|   |-- cciss!c0d1
|   |   |-- cciss!c0d1p1

Is this something that can be fixed? Where would I enter a bug against this?

Thayne Harmon