hp dv9010us hal quirks dv9010US lshal output + suspend to ram problems
0xDeadC0de
roguestar191 at comcast.net
Sat Jan 19 17:36:27 PST 2008
suspend/resume no longer work at all (It does work fine in windows xp
for reference) (Kernel update maybe, maybe noapic option at boot),
before with s3 it worked once - second time same symptoms as now (Screen
doesn't post keyboard doesn't respond but the lights stop blinking).
However once i was able to suspend/resume twice - first time with s3,
second time with vbemode
I'm trying noapic to see if it resolves the system freezes I started to
experience after the bios update. So far i haven't had a lockup with
noapic, but without it _can_ go >24hrs before a lockup without(usually
locks up within a couple hours however) so it will take time to test.
With the old bios noapic was only needed during installation of linux
using older kernels - after kernel updates it was no longer needed, and
now after a bios update it seems to be needed again. May it be related?
-------------- next part --------------
Dumping 110 device(s) from the Global Device List:
-------------------------------------------------
udi = '/org/freedesktop/Hal/devices/computer'
info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list)
info.bus = 'unknown' (string)
info.callouts.add = {'hal-acl-tool --remove-all', 'hal-storage-cleanup-all-mountpoints'} (string list)
info.callouts.session_active = {'hal-acl-tool --reconfigure'} (string list)
info.callouts.session_add = {'hal-acl-tool --reconfigure'} (string list)
info.callouts.session_inactive = {'hal-acl-tool --reconfigure'} (string list)
info.callouts.session_remove = {'hal-acl-tool --reconfigure'} (string list)
info.capabilities = {'cpufreq_control'} (string list)
info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement', 'org.freedesktop.Hal.Device.CPUFreq'} (string list)
info.product = 'Computer' (string)
info.subsystem = 'unknown' (string)
info.udi = '/org/freedesktop/Hal/devices/computer' (string)
org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list)
power_management.acpi.linux.version = '20070126' (string)
power_management.can_hibernate = true (bool)
power_management.can_suspend = true (bool)
power_management.can_suspend_hybrid = false (bool)
power_management.can_suspend_to_disk = true (bool)
power_management.can_suspend_to_ram = true (bool)
power_management.is_powersave_set = false (bool)
power_management.type = 'acpi' (string)
smbios.bios.release_date = '11/22/2007' (string)
smbios.bios.vendor = 'Hewlett-Packard' (string)
smbios.bios.version = 'F.3D' (string)
smbios.chassis.manufacturer = 'Quanta' (string)
smbios.chassis.type = 'Notebook' (string)
smbios.system.manufacturer = 'Hewlett-Packard' (string)
smbios.system.product = 'HP Pavilion dv9000 (EZ453UA#ABA)' (string)
smbios.system.serial = 'CNF64225HT' (string)
smbios.system.uuid = '434E4636-3432-3235-4854-0016369EC89C' (string)
smbios.system.version = 'Rev 1' (string)
system.chassis.manufacturer = 'Quanta' (string)
system.chassis.type = 'Notebook' (string)
system.firmware.release_date = '11/22/2007' (string)
system.firmware.vendor = 'Hewlett-Packard' (string)
system.firmware.version = 'F.3D' (string)
system.formfactor = 'laptop' (string)
system.hardware.primary_video.product = 580 (0x244) (int)
system.hardware.primary_video.vendor = 4318 (0x10de) (int)
system.hardware.product = 'HP Pavilion dv9000 (EZ453UA#ABA)' (string)
system.hardware.serial = 'CNF64225HT' (string)
system.hardware.uuid = '434E4636-3432-3235-4854-0016369EC89C' (string)
system.hardware.vendor = 'Hewlett-Packard' (string)
system.hardware.version = 'Rev 1' (string)
system.kernel.machine = 'i686' (string)
system.kernel.name = 'Linux' (string)
system.kernel.version = '2.6.23.9-85.fc8' (string)
system.product = 'HP Pavilion dv9000 (EZ453UA#ABA) Rev 1' (string)
system.vendor = 'Hewlett-Packard' (string)
More information about the hal
mailing list