Sony SZ650N/C Lid event not firing
Ned Boddie
nboddie at my-network.com
Sat Oct 11 10:57:22 PDT 2008
Hi All,
I've got Ubuntu Hardy, with the 2.6.24-9 kernel.
The lid open close event is not firing, i.e. it never shows up when
doing an acpi_listen and closing and opening the lid.
I'm wondering if it's a HAL item, so I've done the steps recommended by
the Debugging HAL wiki page, and attached them here for review.
These logs show the system booting, me logging in, waiting for
everything to stabilize, then closing the lid and waiting 5 secs, then
opening the lid.
Obviously, this works in Windows for comparison.
Is this a HAL issue or should I go elsewhere?
Regards,
Ned
-------------- next part --------------
Dumping 126 device(s) from the Global Device List:
-------------------------------------------------
udi = '/org/freedesktop/Hal/devices/computer'
info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list)
info.callouts.add = {'hal-acl-tool --remove-all', 'hal-storage-cleanup-all-mountpoints'} (string list)
info.callouts.session_active = {'hal-acl-tool --reconfigure'} (string list)
info.callouts.session_add = {'hal-acl-tool --reconfigure'} (string list)
info.callouts.session_inactive = {'hal-acl-tool --reconfigure'} (string list)
info.callouts.session_remove = {'hal-acl-tool --reconfigure'} (string list)
info.capabilities = {'cpufreq_control'} (string list)
info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement', 'org.freedesktop.Hal.Device.CPUFreq'} (string list)
info.product = 'Computer' (string)
info.subsystem = 'unknown' (string)
info.udi = '/org/freedesktop/Hal/devices/computer' (string)
org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list)
power_management.acpi.linux.version = '20070126' (string)
power_management.can_hibernate = true (bool)
power_management.can_suspend = true (bool)
power_management.can_suspend_hybrid = false (bool)
power_management.can_suspend_to_disk = true (bool)
power_management.can_suspend_to_ram = true (bool)
power_management.is_powersave_set = false (bool)
power_management.type = 'acpi' (string)
system.chassis.manufacturer = 'Sony Corporation' (string)
system.chassis.type = 'Notebook' (string)
system.firmware.release_date = '04/04/2008' (string)
system.firmware.vendor = 'Phoenix Technologies LTD' (string)
system.firmware.version = 'R0122S5' (string)
system.formfactor = 'laptop' (string)
system.hardware.primary_video.product = 10754 (0x2a02) (int)
system.hardware.primary_video.vendor = 32902 (0x8086) (int)
system.hardware.product = 'VGN-SZ650N' (string)
system.hardware.serial = '28205633-3017383' (string)
system.hardware.uuid = '1EC61D20-0EBF-11DC-8C34-0013A9FEB558' (string)
system.hardware.vendor = 'Sony Corporation' (string)
system.hardware.version = 'J002N8TR' (string)
system.kernel.machine = 'x86_64' (string)
system.kernel.name = 'Linux' (string)
system.kernel.version = '2.6.24-19-generic' (string)
udi = '/org/freedesktop/Hal/devices/acpi_CPU0'
info.capabilities = {'processor'} (string list)
info.category = 'processor' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz' (string)
info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0' (string)
linux.acpi_path = '/proc/acpi/processor/CPU0' (string)
linux.acpi_type = 1 (0x1) (int)
linux.hotplug_type = 4 (0x4) (int)
processor.can_throttle = true (bool)
processor.number = 0 (0x0) (int)
udi = '/org/freedesktop/Hal/devices/acpi_CPU1'
info.capabilities = {'processor'} (string list)
info.category = 'processor' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz' (string)
info.udi = '/org/freedesktop/Hal/devices/acpi_CPU1' (string)
linux.acpi_path = '/proc/acpi/processor/CPU1' (string)
linux.acpi_type = 1 (0x1) (int)
linux.hotplug_type = 4 (0x4) (int)
processor.can_throttle = true (bool)
processor.number = 1 (0x1) (int)
udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
access_control.file = '/dev/snd/timer' (string)
access_control.type = 'sound' (string)
alsa.device_file = '/dev/snd/timer' (string)
alsa.type = 'timer' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'ALSA Timer Device' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' (string)
linux.device_file = '/dev/snd/timer' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/virtual/sound/timer' (string)
udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0'
access_control.file = '/dev/sequencer2' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'OSS Sequencer Device' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' (string)
linux.device_file = '/dev/sequencer2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/virtual/sound/sequencer2' (string)
oss.device_file = '/dev/sequencer2' (string)
oss.type = 'sequencer' (string)
udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer'
access_control.file = '/dev/sequencer' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'OSS Sequencer Device' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' (string)
linux.device_file = '/dev/sequencer' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/virtual/sound/sequencer' (string)
oss.device_file = '/dev/sequencer' (string)
oss.type = 'sequencer' (string)
udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'
access_control.file = '/dev/snd/seq' (string)
access_control.type = 'sound' (string)
alsa.device_file = '/dev/snd/seq' (string)
alsa.type = 'sequencer' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'ALSA Sequencer Device' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' (string)
linux.device_file = '/dev/snd/seq' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/virtual/sound/seq' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_5'
info.capabilities = {'input', 'input.mouse'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PS/2 Mouse' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_5' (string)
input.device = '/dev/input/event8' (string)
input.product = 'PS/2 Mouse' (string)
linux.device_file = '/dev/input/event8' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/virtual/input/input8/event8' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_4'
button.has_state = false (bool)
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Sony Vaio Jogdial' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_4' (string)
input.device = '/dev/input/event7' (string)
input.product = 'Sony Vaio Jogdial' (string)
linux.device_file = '/dev/input/event7' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/virtual/input/input7/event7' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3'
button.has_state = true (bool)
button.state.value = false (bool)
button.type = 'lid' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'input.switch', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Lid Switch' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3' (string)
input.device = '/dev/input/event3' (string)
input.product = 'Lid Switch' (string)
linux.device_file = '/dev/input/event3' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/virtual/input/input3/event3' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2'
button.has_state = false (bool)
button.type = 'power' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Power Button (CM)' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' (string)
input.device = '/dev/input/event2' (string)
input.product = 'Power Button (CM)' (string)
linux.device_file = '/dev/input/event2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/virtual/input/input2/event2' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'
info.capabilities = {'input', 'input.mouse'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Macintosh mouse button emulation' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' (string)
input.device = '/dev/input/event0' (string)
input.product = 'Macintosh mouse button emulation' (string)
linux.device_file = '/dev/input/event0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/virtual/input/input0/event0' (string)
udi = '/org/freedesktop/Hal/devices/computer_backlight_0'
info.capabilities = {'laptop_panel'} (string list)
info.category = 'laptop_panel' (string)
info.interfaces = {'org.freedesktop.Hal.Device.LaptopPanel'} (string list)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Generic Backlight Device' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_backlight_0' (string)
laptop_panel.access_method = 'general' (string)
laptop_panel.num_levels = 8 (0x8) (int)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'backlight' (string)
linux.sysfs_path = '/sys/devices/virtual/backlight/sony' (string)
org.freedesktop.Hal.Device.LaptopPanel.method_argnames = {'brightness_value', ''} (string list)
org.freedesktop.Hal.Device.LaptopPanel.method_execpaths = {'hal-system-lcd-set-brightness', 'hal-system-lcd-get-brightness'} (string list)
org.freedesktop.Hal.Device.LaptopPanel.method_names = {'SetBrightness', 'GetBrightness'} (string list)
org.freedesktop.Hal.Device.LaptopPanel.method_signatures = {'i', ''} (string list)
udi = '/org/freedesktop/Hal/devices/computer_backlight'
info.capabilities = {'laptop_panel'} (string list)
info.category = 'laptop_panel' (string)
info.interfaces = {'org.freedesktop.Hal.Device.LaptopPanel'} (string list)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Generic Backlight Device' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_backlight' (string)
laptop_panel.access_method = 'general' (string)
laptop_panel.brightness_in_hardware = false (bool)
laptop_panel.num_levels = 9 (0x9) (int)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'backlight' (string)
linux.sysfs_path = '/sys/devices/virtual/backlight/acpi_video0' (string)
org.freedesktop.Hal.Device.LaptopPanel.method_argnames = {'brightness_value', ''} (string list)
org.freedesktop.Hal.Device.LaptopPanel.method_execpaths = {'hal-system-lcd-set-brightness', 'hal-system-lcd-get-brightness'} (string list)
org.freedesktop.Hal.Device.LaptopPanel.method_names = {'SetBrightness', 'GetBrightness'} (string list)
org.freedesktop.Hal.Device.LaptopPanel.method_signatures = {'i', ''} (string list)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'input.keys', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Sony Vaio Keys' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' (string)
input.device = '/dev/input/event6' (string)
input.product = 'Sony Vaio Keys' (string)
input.xkb.layout = 'us' (string)
input.xkb.model = 'evdev' (string)
input.xkb.rules = 'base' (string)
input.xkb.variant = '' (string)
linux.device_file = '/dev/input/event6' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:3a/SNY6001:00/input/input6/event6' (string)
udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT1'
battery.charge_level.current = 62640 (0xf4b0) (int)
battery.charge_level.design = 62640 (0xf4b0) (int)
battery.charge_level.last_full = 62640 (0xf4b0) (int)
battery.charge_level.percentage = 100 (0x64) (int)
battery.charge_level.rate = 0 (0x0) (int)
battery.is_rechargeable = true (bool)
battery.model = '' (string)
battery.present = true (bool)
battery.rechargeable.is_charging = false (bool)
battery.rechargeable.is_discharging = false (bool)
battery.reporting.current = 62640 (0xf4b0) (int)
battery.reporting.design = 62640 (0xf4b0) (int)
battery.reporting.last_full = 62640 (0xf4b0) (int)
battery.reporting.rate = 0 (0x0) (int)
battery.reporting.technology = 'Li-ion' (string)
battery.reporting.unit = 'mWh' (string)
battery.technology = 'lithium-ion' (string)
battery.type = 'primary' (string)
battery.vendor = 'Sony Corp.' (string)
battery.voltage.current = 12572 (0x311c) (int)
battery.voltage.design = 626 (0x272) (int)
battery.voltage.unit = 'mV' (string)
info.capabilities = {'battery'} (string list)
info.category = 'battery' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_battery_BAT1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'power_supply' (string)
linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:3a/PNP0C09:00/PNP0C0A:00/power_supply/BAT1' (string)
udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_ACAD'
ac_adapter.present = true (bool)
info.capabilities = {'ac_adapter'} (string list)
info.category = 'ac_adapter' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Generic AC Adapter Device' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_power_supply_ac_adapter_ACAD' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'power_supply' (string)
linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:3a/PNP0C09:00/ACPI0003:00/power_supply/ACAD' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'input.keys', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Video Bus' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' (string)
input.device = '/dev/input/event5' (string)
input.product = 'Video Bus' (string)
input.xkb.layout = 'us' (string)
input.xkb.model = 'evdev' (string)
input.xkb.rules = 'base' (string)
input.xkb.variant = '' (string)
linux.device_file = '/dev/input/event5' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5' (string)
udi = '/org/freedesktop/Hal/devices/pnp_SNY9001'
info.linux.driver = 'i8042 aux' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (SNY9001)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_SNY9001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0b' (string)
pnp.id = 'SNY9001' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
info.linux.driver = 'i8042 kbd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0a' (string)
pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string)
pnp.id = 'PNP0303' (string)
udi = '/org/freedesktop/Hal/devices/pnp_IFX0102'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (IFX0102)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_IFX0102' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:09' (string)
pnp.id = 'IFX0102' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AT Real-Time Clock' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:08' (string)
pnp.description = 'AT Real-Time Clock' (string)
pnp.id = 'PNP0b00' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:07' (string)
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
pnp.id = 'PNP0c02' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Math Coprocessor' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:06' (string)
pnp.description = 'Math Coprocessor' (string)
pnp.id = 'PNP0c04' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0103'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (PNP0103)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0103' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:05' (string)
pnp.id = 'PNP0103' (string)
udi = '/org/freedesktop/Hal/devices/pnp_INT0800'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (INT0800)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_INT0800' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:04' (string)
pnp.id = 'INT0800' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AT DMA Controller' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:03' (string)
pnp.description = 'AT DMA Controller' (string)
pnp.id = 'PNP0200' (string)
udi = '/org/freedesktop/Hal/devices/pnp_SNY6001'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (SNY6001)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_SNY6001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:02' (string)
pnp.id = 'SNY6001' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:01' (string)
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
pnp.id = 'PNP0c02' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (PNP0a08)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:00' (string)
pnp.id = 'PNP0a08' (string)
udi = '/org/freedesktop/Hal/devices/platform_sony_laptop'
info.linux.driver = 'sony-laptop' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (sony-laptop)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_sony_laptop' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/sony-laptop' (string)
platform.id = 'sony-laptop' (string)
udi = '/org/freedesktop/Hal/devices/platform_serial8250'
info.linux.driver = 'serial8250' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (serial8250)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_serial8250' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/serial8250' (string)
platform.id = 'serial8250' (string)
udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
info.linux.driver = 'pcspkr' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (pcspkr)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/pcspkr' (string)
platform.id = 'pcspkr' (string)
udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'
info.capabilities = {'input'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_pcspkr' (string)
info.product = 'PC Speaker' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input' (string)
input.device = '/dev/input/event4' (string)
input.originating_device = '/org/freedesktop/Hal/devices/platform_pcspkr' (string)
input.product = 'PC Speaker' (string)
linux.device_file = '/dev/input/event4' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/platform/pcspkr/input/input4/event4' (string)
udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (iTCO_wdt)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/iTCO_wdt' (string)
platform.id = 'iTCO_wdt' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042'
info.linux.driver = 'i8042' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (i8042)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/i8042' (string)
platform.id = 'i8042' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'
info.linux.driver = 'psmouse' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string)
info.product = 'i8042 AUX port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio1' (string)
serio.description = 'i8042 AUX port' (string)
serio.id = 'serio1' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input'
info.capabilities = {'input', 'input.mouse', 'input.touchpad'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string)
info.product = 'AlpsPS/2 ALPS GlidePoint' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input' (string)
input.device = '/dev/input/event9' (string)
input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string)
input.product = 'AlpsPS/2 ALPS GlidePoint' (string)
linux.device_file = '/dev/input/event9' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio1/input/input9/event9' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
info.linux.driver = 'atkbd' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string)
info.product = 'i8042 KBD port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio0' (string)
serio.description = 'i8042 KBD port' (string)
serio.id = 'serio0' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
info.product = 'AT Translated Set 2 keyboard' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' (string)
input.device = '/dev/input/event1' (string)
input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
input.product = 'AT Translated Set 2 keyboard' (string)
input.xkb.layout = 'us' (string)
input.xkb.model = 'evdev' (string)
input.xkb.rules = 'base' (string)
input.xkb.variant = '' (string)
linux.device_file = '/dev/input/event1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio0/input/input1/event1' (string)
udi = '/org/freedesktop/Hal/devices/platform_dock_0'
info.docked = false (bool)
info.interfaces = {'org.freedesktop.Hal.Device.DockStation'} (string list)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (dock.0)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_dock_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/dock.0' (string)
org.freedesktop.Hal.Device.DockStation.method_argnames = {''} (string list)
org.freedesktop.Hal.Device.DockStation.method_execpaths = {'hal-dockstation-undock'} (string list)
org.freedesktop.Hal.Device.DockStation.method_names = {'Undock'} (string list)
org.freedesktop.Hal.Device.DockStation.method_signatures = {''} (string list)
platform.id = 'dock.0' (string)
udi = '/org/freedesktop/Hal/devices/platform_bluetooth'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (bluetooth)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_bluetooth' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/bluetooth' (string)
platform.id = 'bluetooth' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_283e'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) SMBus Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_283e' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 5 (0x5) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3' (string)
pci.product = '82801H (ICH8 Family) SMBus Controller' (string)
pci.product_id = 10302 (0x283e) (int)
pci.subsys_product_id = 36872 (0x9008) (int)
pci.subsys_vendor = 'Sony Corporation' (string)
pci.subsys_vendor_id = 4173 (0x104d) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2828'
info.linux.driver = 'ata_piix' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2828' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2' (string)
pci.device_class = 1 (0x1) (int)
pci.device_protocol = 143 (0x8f) (int)
pci.device_subclass = 1 (0x1) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2' (string)
pci.product = '82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller' (string)
pci.product_id = 10280 (0x2828) (int)
pci.subsys_product_id = 36872 (0x9008) (int)
pci.subsys_vendor = 'Sony Corporation' (string)
pci.subsys_vendor_id = 4173 (0x104d) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2828_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2828' (string)
info.product = 'SCSI Host Adapter' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2828_scsi_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2' (string)
scsi_host.host = 2 (0x2) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2828_scsi_host_scsi_device_lun0'
info.linux.driver = 'sd' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2828_scsi_host' (string)
info.product = 'SCSI Device' (string)
info.subsystem = 'scsi' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2828_scsi_host_scsi_device_lun0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0' (string)
scsi.bus = 0 (0x0) (int)
scsi.host = 2 (0x2) (int)
scsi.lun = 0 (0x0) (int)
scsi.model = 'ST91608220AS' (string)
scsi.target = 0 (0x0) (int)
scsi.type = 'disk' (string)
scsi.vendor = 'ATA' (string)
udi = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST91608220AS_5MA3MAA4'
block.device = '/dev/sda' (string)
block.is_volume = false (bool)
block.major = 8 (0x8) (int)
block.minor = 0 (0x0) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST91608220AS_5MA3MAA4' (string)
info.capabilities = {'storage', 'block'} (string list)
info.category = 'storage' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2828_scsi_host_scsi_device_lun0' (string)
info.product = 'ST91608220AS' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST91608220AS_5MA3MAA4' (string)
info.vendor = 'ATA' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda' (string)
storage.automount_enabled_hint = false (bool)
storage.bus = 'scsi' (string)
storage.drive_type = 'disk' (string)
storage.firmware_version = '3.AL' (string)
storage.hotpluggable = false (bool)
storage.lun = 0 (0x0) (int)
storage.media_check_enabled = false (bool)
storage.model = 'ST91608220AS' (string)
storage.no_partitions_hint = false (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string)
storage.partitioning_scheme = 'mbr' (string)
storage.removable = false (bool)
storage.removable.media_available = true (bool)
storage.removable.media_size = 160041885696 (0x25433d6000) (uint64)
storage.requires_eject = false (bool)
storage.serial = '1ATA_ST91608220AS_5MA3MAA4' (string)
storage.size = 160041885696 (0x25433d6000) (uint64)
storage.vendor = 'ATA' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_1cdcc5e9_3a38_456d_8e9e_fe5595a3b55c'
block.device = '/dev/sda6' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 6 (0x6) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST91608220AS_5MA3MAA4' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST91608220AS_5MA3MAA4' (string)
info.product = 'Volume (swap)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_1cdcc5e9_3a38_456d_8e9e_fe5595a3b55c' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda/sda6' (string)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'swap' (string)
volume.fsusage = 'other' (string)
volume.fsversion = '2' (string)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = '' (string)
volume.num_blocks = 3759147 (0x395c2b) (int)
volume.partition.flags = {} (string list)
volume.partition.label = '' (string)
volume.partition.media_size = 160041885696 (0x25433d6000) (uint64)
volume.partition.number = 6 (0x6) (int)
volume.partition.scheme = 'embr' (string)
volume.partition.start = 158114589696 (0x24d05d2c00) (uint64)
volume.partition.type = '0x82' (string)
volume.partition.uuid = '' (string)
volume.size = 1924683264 (0x72b85600) (uint64)
volume.uuid = '1cdcc5e9-3a38-456d-8e9e-fe5595a3b55c' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_aea92cba_23cb_462d_9f1e_6bc8054cfee7'
block.device = '/dev/sda5' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 5 (0x5) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST91608220AS_5MA3MAA4' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST91608220AS_5MA3MAA4' (string)
info.product = 'Volume (ext3)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_aea92cba_23cb_462d_9f1e_6bc8054cfee7' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda/sda5' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ext3' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '1.0' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list)
volume.mount_point = '/' (string)
volume.num_blocks = 85915557 (0x51ef7a5) (int)
volume.partition.flags = {} (string list)
volume.partition.label = '' (string)
volume.partition.media_size = 160041885696 (0x25433d6000) (uint64)
volume.partition.number = 5 (0x5) (int)
volume.partition.scheme = 'embr' (string)
volume.partition.start = 114125792256 (0x1a926d6400) (uint64)
volume.partition.type = '0x83' (string)
volume.partition.uuid = '' (string)
volume.size = 43988765184 (0xa3def4a00) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = 'aea92cba-23cb-462d-9f1e-6bc8054cfee7' (string)
udi = '/org/freedesktop/Hal/devices/volume_part3_size_1024'
block.device = '/dev/sda3' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 3 (0x3) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST91608220AS_5MA3MAA4' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST91608220AS_5MA3MAA4' (string)
info.product = 'Volume' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_part3_size_1024' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda/sda3' (string)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = '' (string)
volume.fsusage = 'partitiontable' (string)
volume.fsversion = '' (string)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = '' (string)
volume.num_blocks = 2 (0x2) (int)
volume.partition.flags = {} (string list)
volume.partition.label = '' (string)
volume.partition.media_size = 160041885696 (0x25433d6000) (uint64)
volume.partition.number = 3 (0x3) (int)
volume.partition.scheme = 'mbr' (string)
volume.partition.start = 114125760000 (0x1a926ce600) (uint64)
volume.partition.type = '0x05' (string)
volume.partition.uuid = '' (string)
volume.size = 1024 (0x400) (uint64)
volume.uuid = '' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_82900CAA900CA72F'
block.device = '/dev/sda2' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 2 (0x2) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST91608220AS_5MA3MAA4' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST91608220AS_5MA3MAA4' (string)
info.product = 'Volume (ntfs)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_82900CAA900CA72F' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda/sda2' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ntfs' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '3.1' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=', 'umask=', 'locale=', 'utf8'} (string list)
volume.mount_point = '' (string)
volume.num_blocks = 208257813 (0xc69c315) (int)
volume.partition.flags = {'boot'} (string list)
volume.partition.label = '' (string)
volume.partition.media_size = 160041885696 (0x25433d6000) (uint64)
volume.partition.number = 2 (0x2) (int)
volume.partition.scheme = 'mbr' (string)
volume.partition.start = 7493124096 (0x1bea00000) (uint64)
volume.partition.type = '0x07' (string)
volume.partition.uuid = '' (string)
volume.size = 106628000256 (0x18d3862a00) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = '82900CAA900CA72F' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_DEEC089EEC087357'
block.device = '/dev/sda1' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 1 (0x1) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST91608220AS_5MA3MAA4' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_ST91608220AS_5MA3MAA4' (string)
info.product = 'Recovery' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_DEEC089EEC087357' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda/sda1' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ntfs' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '3.1' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'Recovery' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=', 'umask=', 'locale=', 'utf8'} (string list)
volume.mount_point = '' (string)
volume.num_blocks = 14632960 (0xdf4800) (int)
volume.partition.flags = {} (string list)
volume.partition.label = '' (string)
volume.partition.media_size = 160041885696 (0x25433d6000) (uint64)
volume.partition.number = 1 (0x1) (int)
volume.partition.scheme = 'mbr' (string)
volume.partition.start = 1048576 (0x100000) (uint64)
volume.partition.type = '0x27' (string)
volume.partition.uuid = '' (string)
volume.size = 7492075520 (0x1be900000) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = 'DEEC089EEC087357' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_2828_scsi_host_scsi_device_lun0_scsi_generic'
info.capabilities = {'scsi_generic'} (string list)
info.category = 'scsi_generic' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2828_scsi_host_scsi_device_lun0' (string)
info.product = 'SCSI Generic Interface' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2828_scsi_host_scsi_device_lun0_scsi_generic' (string)
linux.device_file = '/dev/sg1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_generic' (string)
linux.sysfs_path = '/sys/class/scsi_generic/sg1' (string)
scsi_generic.device = '/dev/sg1' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_2850'
info.linux.driver = 'ata_piix' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2850' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1' (string)
pci.device_class = 1 (0x1) (int)
pci.device_protocol = 138 (0x8a) (int)
pci.device_subclass = 1 (0x1) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1' (string)
pci.product = '82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller' (string)
pci.product_id = 10320 (0x2850) (int)
pci.subsys_product_id = 36872 (0x9008) (int)
pci.subsys_vendor = 'Sony Corporation' (string)
pci.subsys_vendor_id = 4173 (0x104d) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2850_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2850' (string)
info.product = 'SCSI Host Adapter' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2850_scsi_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0' (string)
scsi_host.host = 0 (0x0) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2850_scsi_host_scsi_device_lun0'
info.linux.driver = 'sr' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2850_scsi_host' (string)
info.product = 'SCSI Device' (string)
info.subsystem = 'scsi' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2850_scsi_host_scsi_device_lun0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0' (string)
scsi.bus = 0 (0x0) (int)
scsi.host = 0 (0x0) (int)
scsi.lun = 0 (0x0) (int)
scsi.model = 'DVD-RAM UJ-852S' (string)
scsi.target = 0 (0x0) (int)
scsi.type = 'cdrom' (string)
scsi.vendor = 'MATSHITA' (string)
udi = '/org/freedesktop/Hal/devices/storage_model_DVD_RAM_UJ_852S'
access_control.file = '/dev/scd0' (string)
access_control.type = 'cdrom' (string)
block.device = '/dev/scd0' (string)
block.is_volume = false (bool)
block.major = 11 (0xb) (int)
block.minor = 0 (0x0) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_model_DVD_RAM_UJ_852S' (string)
info.addons = {'hald-addon-storage'} (string list)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'storage', 'block', 'storage.cdrom', 'access_control'} (string list)
info.category = 'storage' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2850_scsi_host_scsi_device_lun0' (string)
info.product = 'DVD-RAM UJ-852S' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_model_DVD_RAM_UJ_852S' (string)
info.vendor = 'MATSHITA' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sr0' (string)
org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list)
org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list)
org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list)
storage.automount_enabled_hint = true (bool)
storage.bus = 'scsi' (string)
storage.cdrom.bd = false (bool)
storage.cdrom.bdr = false (bool)
storage.cdrom.bdre = false (bool)
storage.cdrom.cdr = true (bool)
storage.cdrom.cdrw = true (bool)
storage.cdrom.dvd = true (bool)
storage.cdrom.dvdplusr = true (bool)
storage.cdrom.dvdplusrdl = true (bool)
storage.cdrom.dvdplusrw = true (bool)
storage.cdrom.dvdplusrwdl = false (bool)
storage.cdrom.dvdr = true (bool)
storage.cdrom.dvdram = true (bool)
storage.cdrom.dvdrw = true (bool)
storage.cdrom.hddvd = false (bool)
storage.cdrom.hddvdr = false (bool)
storage.cdrom.hddvdrw = false (bool)
storage.cdrom.mo = false (bool)
storage.cdrom.mrw = true (bool)
storage.cdrom.mrw_w = true (bool)
storage.cdrom.read_speed = 4234 (0x108a) (int)
storage.cdrom.support_media_changed = true (bool)
storage.cdrom.support_multisession = true (bool)
storage.cdrom.write_speed = 4234 (0x108a) (int)
storage.cdrom.write_speeds = {'4234', '2822', '2117', '1411', '706'} (string list)
storage.drive_type = 'cdrom' (string)
storage.firmware_version = '1.01' (string)
storage.hotpluggable = false (bool)
storage.lun = 0 (0x0) (int)
storage.media_check_enabled = true (bool)
storage.model = 'DVD-RAM UJ-852S' (string)
storage.no_partitions_hint = true (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string)
storage.partitioning_scheme = '' (string)
storage.removable = true (bool)
storage.removable.media_available = false (bool)
storage.removable.support_async_notification = false (bool)
storage.requires_eject = true (bool)
storage.size = 0 (0x0) (uint64)
storage.vendor = 'MATSHITA' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_2850_scsi_host_scsi_device_lun0_scsi_generic'
info.capabilities = {'scsi_generic'} (string list)
info.category = 'scsi_generic' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2850_scsi_host_scsi_device_lun0' (string)
info.product = 'SCSI Generic Interface' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2850_scsi_host_scsi_device_lun0_scsi_generic' (string)
linux.device_file = '/dev/sg0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_generic' (string)
linux.sysfs_path = '/sys/class/scsi_generic/sg0' (string)
scsi_generic.device = '/dev/sg0' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_2815'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801HEM (ICH8M) LPC Interface Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2815' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 1 (0x1) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0' (string)
pci.product = '82801HEM (ICH8M) LPC Interface Controller' (string)
pci.product_id = 10261 (0x2815) (int)
pci.subsys_product_id = 36872 (0x9008) (int)
pci.subsys_vendor = 'Sony Corporation' (string)
pci.subsys_vendor_id = 4173 (0x104d) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2448'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801 Mobile PCI Bridge' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2448' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 1 (0x1) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0' (string)
pci.product = '82801 Mobile PCI Bridge' (string)
pci.product_id = 9288 (0x2448) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_104c_803b'
info.linux.driver = 'tifm_7xx1' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string)
info.product = '5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_104c_803b' (string)
info.vendor = 'Texas Instruments' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:04.2' (string)
pci.device_class = 1 (0x1) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 128 (0x80) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:04.2' (string)
pci.product = '5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)' (string)
pci.product_id = 32827 (0x803b) (int)
pci.subsys_product_id = 36872 (0x9008) (int)
pci.subsys_vendor = 'Sony Corporation' (string)
pci.subsys_vendor_id = 4173 (0x104d) (int)
pci.vendor = 'Texas Instruments' (string)
pci.vendor_id = 4172 (0x104c) (int)
udi = '/org/freedesktop/Hal/devices/pci_104c_803a'
info.linux.driver = 'ohci1394' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string)
info.product = 'PCIxx12 OHCI Compliant IEEE 1394 Host Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_104c_803a' (string)
info.vendor = 'Texas Instruments' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:04.1' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 16 (0x10) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:04.1' (string)
pci.product = 'PCIxx12 OHCI Compliant IEEE 1394 Host Controller' (string)
pci.product_id = 32826 (0x803a) (int)
pci.subsys_product_id = 36872 (0x9008) (int)
pci.subsys_vendor = 'Sony Corporation' (string)
pci.subsys_vendor_id = 4173 (0x104d) (int)
pci.vendor = 'Texas Instruments' (string)
pci.vendor_id = 4172 (0x104c) (int)
udi = '/org/freedesktop/Hal/devices/pci_104c_8039'
info.linux.driver = 'yenta_cardbus' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string)
info.product = 'PCIxx12 Cardbus Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_104c_8039' (string)
info.vendor = 'Texas Instruments' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:04.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 7 (0x7) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:04.0' (string)
pci.product = 'PCIxx12 Cardbus Controller' (string)
pci.product_id = 32825 (0x8039) (int)
pci.subsys_product_id = 36872 (0x9008) (int)
pci.subsys_vendor = 'Sony Corporation' (string)
pci.subsys_vendor_id = 4173 (0x104d) (int)
pci.vendor = 'Texas Instruments' (string)
pci.vendor_id = 4172 (0x104c) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2836'
info.linux.driver = 'ehci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) USB2 EHCI Controller #1' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2836' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 32 (0x20) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7' (string)
pci.product = '82801H (ICH8 Family) USB2 EHCI Controller #1' (string)
pci.product_id = 10294 (0x2836) (int)
pci.subsys_product_id = 36872 (0x9008) (int)
pci.subsys_vendor = 'Sony Corporation' (string)
pci.subsys_vendor_id = 4173 (0x104d) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2836' (string)
info.product = 'EHCI Host Controller' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7' (string)
info.vendor = 'Linux 2.6.24-19-generic ehci_hcd' (string)
linux.device_file = '/dev/bus/usb/007/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb7' (string)
usb_device.bus_number = 7 (0x7) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 1 (0x1) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb7' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 6 (0x6) (int)
usb_device.product = 'EHCI Host Controller' (string)
usb_device.product_id = 0 (0x0) (int)
usb_device.serial = '0000:00:1d.7' (string)
usb_device.speed = 480.0 (480) (double)
usb_device.speed_bcd = 294912 (0x48000) (int)
usb_device.vendor = 'Linux 2.6.24-19-generic ehci_hcd' (string)
usb_device.vendor_id = 0 (0x0) (int)
usb_device.version = 2.0 (2) (double)
usb_device.version_bcd = 512 (0x200) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7_if0'
info.bus = 'usb' (string)
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb7/7-0:1.0' (string)
usb.bus_number = 7 (0x7) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 1 (0x1) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb7/7-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 6 (0x6) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 0 (0x0) (int)
usb.serial = '0000:00:1d.7' (string)
usb.speed = 480.0 (480) (double)
usb.speed_bcd = 294912 (0x48000) (int)
usb.vendor = 'Linux 2.6.24-19-generic ehci_hcd' (string)
usb.vendor_id = 0 (0x0) (int)
usb.version = 2.0 (2) (double)
usb.version_bcd = 512 (0x200) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2832'
info.linux.driver = 'uhci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) USB UHCI Controller #3' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2832' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2' (string)
pci.product = '82801H (ICH8 Family) USB UHCI Controller #3' (string)
pci.product_id = 10290 (0x2832) (int)
pci.subsys_product_id = 36872 (0x9008) (int)
pci.subsys_vendor = 'Sony Corporation' (string)
pci.subsys_vendor_id = 4173 (0x104d) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2832' (string)
info.product = 'UHCI Host Controller' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2' (string)
info.vendor = 'Linux 2.6.24-19-generic uhci_hcd' (string)
linux.device_file = '/dev/bus/usb/006/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6' (string)
usb_device.bus_number = 6 (0x6) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = 'UHCI Host Controller' (string)
usb_device.product_id = 0 (0x0) (int)
usb_device.serial = '0000:00:1d.2' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.speed_bcd = 4608 (0x1200) (int)
usb_device.vendor = 'Linux 2.6.24-19-generic uhci_hcd' (string)
usb_device.vendor_id = 0 (0x0) (int)
usb_device.version = 1.1 (1.1) (double)
usb_device.version_bcd = 272 (0x110) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_44e_300d_011d5df1'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2' (string)
info.product = 'UGX' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_44e_300d_011d5df1' (string)
info.vendor = 'Alps Electric Co., Ltd' (string)
linux.device_file = '/dev/bus/usb/006/002' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-1' (string)
usb_device.bus_number = 6 (0x6) (int)
usb_device.can_wake_up = false (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 224 (0xe0) (int)
usb_device.device_protocol = 1 (0x1) (int)
usb_device.device_revision_bcd = 6421 (0x1915) (int)
usb_device.device_subclass = 1 (0x1) (int)
usb_device.is_self_powered = false (bool)
usb_device.linux.device_number = 2 (0x2) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-1' (string)
usb_device.max_power = 100 (0x64) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 3 (0x3) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product = 'UGX' (string)
usb_device.product_id = 12301 (0x300d) (int)
usb_device.serial = '011d5df1' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.speed_bcd = 4608 (0x1200) (int)
usb_device.vendor = 'Alps Electric Co., Ltd' (string)
usb_device.vendor_id = 1102 (0x44e) (int)
usb_device.version = 2.0 (2) (double)
usb_device.version_bcd = 512 (0x200) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_44e_300d_011d5df1_if2'
info.bus = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_44e_300d_011d5df1' (string)
info.product = 'USB Application Specific Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_44e_300d_011d5df1_if2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-1/6-1:1.2' (string)
usb.bus_number = 6 (0x6) (int)
usb.can_wake_up = false (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 224 (0xe0) (int)
usb.device_protocol = 1 (0x1) (int)
usb.device_revision_bcd = 6421 (0x1915) (int)
usb.device_subclass = 1 (0x1) (int)
usb.interface.class = 254 (0xfe) (int)
usb.interface.number = 2 (0x2) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 1 (0x1) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-1/6-1:1.2' (string)
usb.max_power = 100 (0x64) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 3 (0x3) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Application Specific Interface' (string)
usb.product_id = 12301 (0x300d) (int)
usb.serial = '011d5df1' (string)
usb.speed = 12.0 (12) (double)
usb.speed_bcd = 4608 (0x1200) (int)
usb.vendor = 'Alps Electric Co., Ltd' (string)
usb.vendor_id = 1102 (0x44e) (int)
usb.version = 2.0 (2) (double)
usb.version_bcd = 512 (0x200) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_44e_300d_011d5df1_if1'
info.bus = 'usb' (string)
info.linux.driver = 'hci_usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_44e_300d_011d5df1' (string)
info.product = 'USB Wireless Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_44e_300d_011d5df1_if1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-1/6-1:1.1' (string)
usb.bus_number = 6 (0x6) (int)
usb.can_wake_up = false (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 224 (0xe0) (int)
usb.device_protocol = 1 (0x1) (int)
usb.device_revision_bcd = 6421 (0x1915) (int)
usb.device_subclass = 1 (0x1) (int)
usb.interface.class = 224 (0xe0) (int)
usb.interface.number = 1 (0x1) (int)
usb.interface.protocol = 1 (0x1) (int)
usb.interface.subclass = 1 (0x1) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-1/6-1:1.1' (string)
usb.max_power = 100 (0x64) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 3 (0x3) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Wireless Interface' (string)
usb.product_id = 12301 (0x300d) (int)
usb.serial = '011d5df1' (string)
usb.speed = 12.0 (12) (double)
usb.speed_bcd = 4608 (0x1200) (int)
usb.vendor = 'Alps Electric Co., Ltd' (string)
usb.vendor_id = 1102 (0x44e) (int)
usb.version = 2.0 (2) (double)
usb.version_bcd = 512 (0x200) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_44e_300d_011d5df1_if0'
info.bus = 'usb' (string)
info.linux.driver = 'hci_usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_44e_300d_011d5df1' (string)
info.product = 'USB Wireless Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_44e_300d_011d5df1_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-1/6-1:1.0' (string)
usb.bus_number = 6 (0x6) (int)
usb.can_wake_up = false (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 224 (0xe0) (int)
usb.device_protocol = 1 (0x1) (int)
usb.device_revision_bcd = 6421 (0x1915) (int)
usb.device_subclass = 1 (0x1) (int)
usb.interface.class = 224 (0xe0) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 1 (0x1) (int)
usb.interface.subclass = 1 (0x1) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-1/6-1:1.0' (string)
usb.max_power = 100 (0x64) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 3 (0x3) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Wireless Interface' (string)
usb.product_id = 12301 (0x300d) (int)
usb.serial = '011d5df1' (string)
usb.speed = 12.0 (12) (double)
usb.speed_bcd = 4608 (0x1200) (int)
usb.vendor = 'Alps Electric Co., Ltd' (string)
usb.vendor_id = 1102 (0x44e) (int)
usb.version = 2.0 (2) (double)
usb.version_bcd = 512 (0x200) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_44e_300d_011d5df1_if0_bluetooth_hci_1bfb1d5df1_1'
bluetooth_hci.address = 120177122801 (0x1bfb1d5df1) (uint64)
bluetooth_hci.originating_device = '/org/freedesktop/Hal/devices/usb_device_44e_300d_011d5df1_if0' (string)
info.capabilities = {'bluetooth_hci'} (string list)
info.category = 'bluetooth_hci' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_44e_300d_011d5df1_if0' (string)
info.product = 'Bluetooth Host Controller Interface' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_44e_300d_011d5df1_if0_bluetooth_hci_1bfb1d5df1_1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'bluetooth' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-1/6-1:1.0/hci0' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_44e_300d_011d5df1_if0_bluetooth_hci_1bfb1d5df1_0'
bluetooth_hci.address = 120177122801 (0x1bfb1d5df1) (uint64)
bluetooth_hci.originating_device = '/org/freedesktop/Hal/devices/usb_device_44e_300d_011d5df1_if0' (string)
info.capabilities = {'bluetooth_hci'} (string list)
info.category = 'bluetooth_hci' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_44e_300d_011d5df1_if0' (string)
info.product = 'Bluetooth Host Controller Interface' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_44e_300d_011d5df1_if0_bluetooth_hci_1bfb1d5df1_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'bluetooth' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-1/6-1:1.0/hci0' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_44e_300d_011d5df1_if0_bluetooth_hci_1bfb1d5df1'
bluetooth_hci.address = 120177122801 (0x1bfb1d5df1) (uint64)
bluetooth_hci.originating_device = '/org/freedesktop/Hal/devices/usb_device_44e_300d_011d5df1_if0' (string)
info.capabilities = {'bluetooth_hci'} (string list)
info.category = 'bluetooth_hci' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_44e_300d_011d5df1_if0' (string)
info.product = 'Bluetooth Host Controller Interface' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_44e_300d_011d5df1_if0_bluetooth_hci_1bfb1d5df1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'bluetooth' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-1/6-1:1.0/hci0' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2_if0'
info.bus = 'usb' (string)
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-0:1.0' (string)
usb.bus_number = 6 (0x6) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb6/6-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 0 (0x0) (int)
usb.serial = '0000:00:1d.2' (string)
usb.speed = 12.0 (12) (double)
usb.speed_bcd = 4608 (0x1200) (int)
usb.vendor = 'Linux 2.6.24-19-generic uhci_hcd' (string)
usb.vendor_id = 0 (0x0) (int)
usb.version = 1.1 (1.1) (double)
usb.version_bcd = 272 (0x110) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2831'
info.linux.driver = 'uhci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) USB UHCI Controller #2' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2831' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1' (string)
pci.product = '82801H (ICH8 Family) USB UHCI Controller #2' (string)
pci.product_id = 10289 (0x2831) (int)
pci.subsys_product_id = 36872 (0x9008) (int)
pci.subsys_vendor = 'Sony Corporation' (string)
pci.subsys_vendor_id = 4173 (0x104d) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2831' (string)
info.product = 'UHCI Host Controller' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1' (string)
info.vendor = 'Linux 2.6.24-19-generic uhci_hcd' (string)
linux.device_file = '/dev/bus/usb/005/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb5' (string)
usb_device.bus_number = 5 (0x5) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb5' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = 'UHCI Host Controller' (string)
usb_device.product_id = 0 (0x0) (int)
usb_device.serial = '0000:00:1d.1' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.speed_bcd = 4608 (0x1200) (int)
usb_device.vendor = 'Linux 2.6.24-19-generic uhci_hcd' (string)
usb_device.vendor_id = 0 (0x0) (int)
usb_device.version = 1.1 (1.1) (double)
usb_device.version_bcd = 272 (0x110) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_46d_c518_noserial'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1' (string)
info.product = 'MX610 Laser Cordless Mouse' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c518_noserial' (string)
info.vendor = 'Logitech, Inc.' (string)
linux.device_file = '/dev/bus/usb/005/002' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb5/5-1' (string)
usb_device.bus_number = 5 (0x5) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration = 'RR42.02_B0036' (string)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 0 (0x0) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 16898 (0x4202) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = false (bool)
usb_device.linux.device_number = 2 (0x2) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb5/5-1' (string)
usb_device.max_power = 98 (0x62) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 2 (0x2) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product = 'MX610 Laser Cordless Mouse' (string)
usb_device.product_id = 50456 (0xc518) (int)
usb_device.speed = 1.5 (1.5) (double)
usb_device.speed_bcd = 336 (0x150) (int)
usb_device.vendor = 'Logitech, Inc.' (string)
usb_device.vendor_id = 1133 (0x46d) (int)
usb_device.version = 2.0 (2) (double)
usb_device.version_bcd = 512 (0x200) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_46d_c518_noserial_if1'
info.bus = 'usb' (string)
info.linux.driver = 'usbhid' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c518_noserial' (string)
info.product = 'USB HID Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c518_noserial_if1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.1' (string)
usb.bus_number = 5 (0x5) (int)
usb.can_wake_up = true (bool)
usb.configuration = 'RR42.02_B0036' (string)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 16898 (0x4202) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 3 (0x3) (int)
usb.interface.number = 1 (0x1) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.1' (string)
usb.max_power = 98 (0x62) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 2 (0x2) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB HID Interface' (string)
usb.product_id = 50456 (0xc518) (int)
usb.speed = 1.5 (1.5) (double)
usb.speed_bcd = 336 (0x150) (int)
usb.vendor = 'Logitech, Inc.' (string)
usb.vendor_id = 1133 (0x46d) (int)
usb.version = 2.0 (2) (double)
usb.version_bcd = 512 (0x200) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_46d_c518_noserial_if1_logicaldev_input'
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'input.keys', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c518_noserial_if1' (string)
info.product = 'Logitech USB Receiver' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c518_noserial_if1_logicaldev_input' (string)
input.device = '/dev/input/event11' (string)
input.originating_device = '/org/freedesktop/Hal/devices/usb_device_46d_c518_noserial_if1' (string)
input.product = 'Logitech USB Receiver' (string)
input.xkb.layout = 'us' (string)
input.xkb.model = 'evdev' (string)
input.xkb.rules = 'base' (string)
input.xkb.variant = '' (string)
linux.device_file = '/dev/input/event11' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.1/input/input11/event11' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_46d_c518_noserial_if0'
info.bus = 'usb' (string)
info.linux.driver = 'usbhid' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c518_noserial' (string)
info.product = 'USB HID Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c518_noserial_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0' (string)
usb.bus_number = 5 (0x5) (int)
usb.can_wake_up = true (bool)
usb.configuration = 'RR42.02_B0036' (string)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 16898 (0x4202) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 3 (0x3) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 2 (0x2) (int)
usb.interface.subclass = 1 (0x1) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0' (string)
usb.max_power = 98 (0x62) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 2 (0x2) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB HID Interface' (string)
usb.product_id = 50456 (0xc518) (int)
usb.speed = 1.5 (1.5) (double)
usb.speed_bcd = 336 (0x150) (int)
usb.vendor = 'Logitech, Inc.' (string)
usb.vendor_id = 1133 (0x46d) (int)
usb.version = 2.0 (2) (double)
usb.version_bcd = 512 (0x200) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_46d_c518_noserial_if0_logicaldev_input'
info.capabilities = {'input', 'input.mouse'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c518_noserial_if0' (string)
info.product = 'Logitech USB Receiver' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c518_noserial_if0_logicaldev_input' (string)
input.device = '/dev/input/event10' (string)
input.originating_device = '/org/freedesktop/Hal/devices/usb_device_46d_c518_noserial_if0' (string)
input.product = 'Logitech USB Receiver' (string)
linux.device_file = '/dev/input/event10' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0/input/input10/event10' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_if0'
info.bus = 'usb' (string)
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb5/5-0:1.0' (string)
usb.bus_number = 5 (0x5) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb5/5-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 0 (0x0) (int)
usb.serial = '0000:00:1d.1' (string)
usb.speed = 12.0 (12) (double)
usb.speed_bcd = 4608 (0x1200) (int)
usb.vendor = 'Linux 2.6.24-19-generic uhci_hcd' (string)
usb.vendor_id = 0 (0x0) (int)
usb.version = 1.1 (1.1) (double)
usb.version_bcd = 272 (0x110) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2830'
info.linux.driver = 'uhci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) USB UHCI Controller #1' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2830' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0' (string)
pci.product = '82801H (ICH8 Family) USB UHCI Controller #1' (string)
pci.product_id = 10288 (0x2830) (int)
pci.subsys_product_id = 36872 (0x9008) (int)
pci.subsys_vendor = 'Sony Corporation' (string)
pci.subsys_vendor_id = 4173 (0x104d) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2830' (string)
info.product = 'UHCI Host Controller' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0' (string)
info.vendor = 'Linux 2.6.24-19-generic uhci_hcd' (string)
linux.device_file = '/dev/bus/usb/004/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb4' (string)
usb_device.bus_number = 4 (0x4) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb4' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = 'UHCI Host Controller' (string)
usb_device.product_id = 0 (0x0) (int)
usb_device.serial = '0000:00:1d.0' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.speed_bcd = 4608 (0x1200) (int)
usb_device.vendor = 'Linux 2.6.24-19-generic uhci_hcd' (string)
usb_device.vendor_id = 0 (0x0) (int)
usb_device.version = 1.1 (1.1) (double)
usb_device.version_bcd = 272 (0x110) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0'
info.bus = 'usb' (string)
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-0:1.0' (string)
usb.bus_number = 4 (0x4) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 0 (0x0) (int)
usb.serial = '0000:00:1d.0' (string)
usb.speed = 12.0 (12) (double)
usb.speed_bcd = 4608 (0x1200) (int)
usb.vendor = 'Linux 2.6.24-19-generic uhci_hcd' (string)
usb.vendor_id = 0 (0x0) (int)
usb.version = 1.1 (1.1) (double)
usb.version_bcd = 272 (0x110) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2845'
info.linux.driver = 'pcieport-driver' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) PCI Express Port 4' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2845' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.3' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.3' (string)
pci.product = '82801H (ICH8 Family) PCI Express Port 4' (string)
pci.product_id = 10309 (0x2845) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2843'
info.linux.driver = 'pcieport-driver' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) PCI Express Port 3' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2843' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2' (string)
pci.product = '82801H (ICH8 Family) PCI Express Port 3' (string)
pci.product_id = 10307 (0x2843) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_11ab_4363'
info.linux.driver = 'sky2' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2843' (string)
info.product = '88E8055 PCI-E Gigabit Ethernet Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_11ab_4363' (string)
info.vendor = 'Marvell Technology Group Ltd.' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2/0000:07:00.0' (string)
pci.device_class = 2 (0x2) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2/0000:07:00.0' (string)
pci.product = '88E8055 PCI-E Gigabit Ethernet Controller' (string)
pci.product_id = 17251 (0x4363) (int)
pci.subsys_product_id = 36872 (0x9008) (int)
pci.subsys_vendor = 'Sony Corporation' (string)
pci.subsys_vendor_id = 4173 (0x104d) (int)
pci.vendor = 'Marvell Technology Group Ltd.' (string)
pci.vendor_id = 4523 (0x11ab) (int)
udi = '/org/freedesktop/Hal/devices/net_00_13_a9_fe_b5_58'
info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list)
info.category = 'net.80203' (string)
info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list)
info.parent = '/org/freedesktop/Hal/devices/pci_11ab_4363' (string)
info.product = 'Networking Interface' (string)
info.udi = '/org/freedesktop/Hal/devices/net_00_13_a9_fe_b5_58' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'net' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2/0000:07:00.0/net/eth0' (string)
net.80203.mac_address = 84456420696 (0x13a9feb558) (uint64)
net.address = '00:13:a9:fe:b5:58' (string)
net.arp_proto_hw_id = 1 (0x1) (int)
net.interface = 'eth0' (string)
net.linux.ifindex = 2 (0x2) (int)
net.originating_device = '/org/freedesktop/Hal/devices/pci_11ab_4363' (string)
net.physical_device = '/org/freedesktop/Hal/devices/pci_11ab_4363' (string)
org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list)
udi = '/org/freedesktop/Hal/devices/pci_8086_2841'
info.linux.driver = 'pcieport-driver' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) PCI Express Port 2' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2841' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1' (string)
pci.product = '82801H (ICH8 Family) PCI Express Port 2' (string)
pci.product_id = 10305 (0x2841) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_4229'
info.linux.driver = 'iwl4965' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2841' (string)
info.product = 'PRO/Wireless 4965 AG or AGN Network Connection' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_4229' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:06:00.0' (string)
pci.device_class = 2 (0x2) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 128 (0x80) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:06:00.0' (string)
pci.product = 'PRO/Wireless 4965 AG or AGN Network Connection' (string)
pci.product_id = 16937 (0x4229) (int)
pci.subsys_product_id = 4352 (0x1100) (int)
pci.subsys_vendor = 'Intel Corporation' (string)
pci.subsys_vendor_id = 32902 (0x8086) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/net_00_13_e8_5c_90_a7_0'
info.capabilities = {'net', 'net.80211control'} (string list)
info.category = 'net.80211control' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_4229' (string)
info.product = 'Networking Wireless Control Interface' (string)
info.udi = '/org/freedesktop/Hal/devices/net_00_13_e8_5c_90_a7_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'net' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:06:00.0/net/wmaster0' (string)
net.address = '00:13:e8:5c:90:a7' (string)
net.arp_proto_hw_id = 801 (0x321) (int)
net.interface = 'wmaster0' (string)
net.linux.ifindex = 3 (0x3) (int)
net.originating_device = '/org/freedesktop/Hal/devices/pci_8086_4229' (string)
net.physical_device = '/org/freedesktop/Hal/devices/pci_8086_4229' (string)
udi = '/org/freedesktop/Hal/devices/net_00_13_e8_5c_90_a7'
info.capabilities = {'net', 'net.80211'} (string list)
info.category = 'net.80211' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_4229' (string)
info.product = 'WLAN Interface' (string)
info.udi = '/org/freedesktop/Hal/devices/net_00_13_e8_5c_90_a7' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'net' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:06:00.0/net/wlan0' (string)
net.80211.mac_address = 85502759079 (0x13e85c90a7) (uint64)
net.address = '00:13:e8:5c:90:a7' (string)
net.arp_proto_hw_id = 1 (0x1) (int)
net.interface = 'wlan0' (string)
net.linux.ifindex = 4 (0x4) (int)
net.originating_device = '/org/freedesktop/Hal/devices/pci_8086_4229' (string)
net.physical_device = '/org/freedesktop/Hal/devices/pci_8086_4229' (string)
udi = '/org/freedesktop/Hal/devices/ipw_wlan_switch'
info.capabilities = {'killswitch'} (string list)
info.category = 'killswitch' (string)
info.interfaces = {'org.freedesktop.Hal.Device.KillSwitch'} (string list)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_4229' (string)
info.product = 'Intel PRO/Wireless WLAN Switch' (string)
info.subsystem = 'unknown' (string)
info.udi = '/org/freedesktop/Hal/devices/ipw_wlan_switch' (string)
killswitch.access_method = 'ipw' (string)
killswitch.type = 'wlan' (string)
org.freedesktop.Hal.Device.KillSwitch.method_argnames = {'power', ''} (string list)
org.freedesktop.Hal.Device.KillSwitch.method_execpaths = {'hal-system-killswitch-set-power', 'hal-system-killswitch-get-power'} (string list)
org.freedesktop.Hal.Device.KillSwitch.method_names = {'SetPower', 'GetPower'} (string list)
org.freedesktop.Hal.Device.KillSwitch.method_signatures = {'b', ''} (string list)
udi = '/org/freedesktop/Hal/devices/pci_8086_283f'
info.linux.driver = 'pcieport-driver' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) PCI Express Port 1' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_283f' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0' (string)
pci.product = '82801H (ICH8 Family) PCI Express Port 1' (string)
pci.product_id = 10303 (0x283f) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_284b'
info.linux.driver = 'HDA Intel' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) HD Audio Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0' (string)
pci.device_class = 4 (0x4) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0' (string)
pci.product = '82801H (ICH8 Family) HD Audio Controller' (string)
pci.product_id = 10315 (0x284b) (int)
pci.subsys_product_id = 36872 (0x9008) (int)
pci.subsys_vendor = 'Sony Corporation' (string)
pci.subsys_vendor_id = 4173 (0x104d) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0'
info.capabilities = {'sound'} (string list)
info.category = 'sound' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
info.product = 'HDA Intel Sound Card' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0' (string)
sound.card = 0 (0x0) (int)
sound.card_id = 'HDA Intel' (string)
sound.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_alsa_playback_0'
access_control.file = '/dev/snd/pcmC0D0p' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'HDA Intel' (string)
alsa.device = 0 (0x0) (int)
alsa.device_file = '/dev/snd/pcmC0D0p' (string)
alsa.device_id = 'HDA Generic' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string)
alsa.pcm_class = 'generic' (string)
alsa.type = 'playback' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string)
info.product = 'HDA Generic ALSA Playback Device' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_alsa_playback_0' (string)
linux.device_file = '/dev/snd/pcmC0D0p' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D0p' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_alsa_capture_0'
access_control.file = '/dev/snd/pcmC0D0c' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'HDA Intel' (string)
alsa.device = 0 (0x0) (int)
alsa.device_file = '/dev/snd/pcmC0D0c' (string)
alsa.device_id = 'HDA Generic' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string)
alsa.pcm_class = 'generic' (string)
alsa.type = 'capture' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string)
info.product = 'HDA Generic ALSA Capture Device' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_alsa_capture_0' (string)
linux.device_file = '/dev/snd/pcmC0D0c' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D0c' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_oss_mixer__1'
access_control.file = '/dev/mixer' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string)
info.product = 'HDA Generic OSS Control Device' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_oss_mixer__1' (string)
linux.device_file = '/dev/mixer' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/mixer' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'HDA Intel' (string)
oss.device_file = '/dev/mixer' (string)
oss.device_id = 'HDA Generic' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string)
oss.type = 'mixer' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_alsa_hw_specific_1'
access_control.file = '/dev/snd/hwC0D1' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'HDA Intel' (string)
alsa.device = 1 (0x1) (int)
alsa.device_file = '/dev/snd/hwC0D1' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string)
alsa.type = 'hw_specific' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string)
info.product = 'HDA Intel ALSA hardware specific Device' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_alsa_hw_specific_1' (string)
linux.device_file = '/dev/snd/hwC0D1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D1' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_alsa_hw_specific_0'
access_control.file = '/dev/snd/hwC0D0' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'HDA Intel' (string)
alsa.device = 0 (0x0) (int)
alsa.device_file = '/dev/snd/hwC0D0' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string)
alsa.type = 'hw_specific' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string)
info.product = 'HDA Intel ALSA hardware specific Device' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_alsa_hw_specific_0' (string)
linux.device_file = '/dev/snd/hwC0D0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_oss_pcm_0_0'
access_control.file = '/dev/dsp' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string)
info.product = 'HDA Generic OSS PCM Device' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_oss_pcm_0_0' (string)
linux.device_file = '/dev/dsp' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/dsp' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'HDA Intel' (string)
oss.device = 0 (0x0) (int)
oss.device_file = '/dev/dsp' (string)
oss.device_id = 'HDA Generic' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string)
oss.type = 'pcm' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_alsa_control__1'
access_control.file = '/dev/snd/controlC0' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'HDA Intel' (string)
alsa.device_file = '/dev/snd/controlC0' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string)
alsa.type = 'control' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string)
info.product = 'HDA Intel ALSA Control Device' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_alsa_control__1' (string)
linux.device_file = '/dev/snd/controlC0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/controlC0' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_oss_pcm_0'
access_control.file = '/dev/audio' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string)
info.product = 'HDA Generic OSS PCM Device' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0_oss_pcm_0' (string)
linux.device_file = '/dev/audio' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/audio' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'HDA Intel' (string)
oss.device = 0 (0x0) (int)
oss.device_file = '/dev/audio' (string)
oss.device_id = 'HDA Generic' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b_sound_card_0' (string)
oss.type = 'pcm' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_283a'
info.linux.driver = 'ehci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) USB2 EHCI Controller #2' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_283a' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 32 (0x20) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7' (string)
pci.product = '82801H (ICH8 Family) USB2 EHCI Controller #2' (string)
pci.product_id = 10298 (0x283a) (int)
pci.subsys_product_id = 36872 (0x9008) (int)
pci.subsys_vendor = 'Sony Corporation' (string)
pci.subsys_vendor_id = 4173 (0x104d) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1a_7'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_283a' (string)
info.product = 'EHCI Host Controller' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1a_7' (string)
info.vendor = 'Linux 2.6.24-19-generic ehci_hcd' (string)
linux.device_file = '/dev/bus/usb/003/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3' (string)
usb_device.bus_number = 3 (0x3) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 1 (0x1) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 4 (0x4) (int)
usb_device.product = 'EHCI Host Controller' (string)
usb_device.product_id = 0 (0x0) (int)
usb_device.serial = '0000:00:1a.7' (string)
usb_device.speed = 480.0 (480) (double)
usb_device.speed_bcd = 294912 (0x48000) (int)
usb_device.vendor = 'Linux 2.6.24-19-generic ehci_hcd' (string)
usb_device.vendor_id = 0 (0x0) (int)
usb_device.version = 2.0 (2) (double)
usb_device.version_bcd = 512 (0x200) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_5ca_183a_noserial'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1a_7' (string)
info.product = 'Unknown (0x183a)' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_5ca_183a_noserial' (string)
info.vendor = 'Ricoh Co., Ltd' (string)
linux.device_file = '/dev/bus/usb/003/003' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3/3-2' (string)
usb_device.bus_number = 3 (0x3) (int)
usb_device.can_wake_up = false (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 239 (0xef) (int)
usb_device.device_protocol = 1 (0x1) (int)
usb_device.device_revision_bcd = 256 (0x100) (int)
usb_device.device_subclass = 2 (0x2) (int)
usb_device.is_self_powered = false (bool)
usb_device.linux.device_number = 3 (0x3) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3/3-2' (string)
usb_device.max_power = 100 (0x64) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 2 (0x2) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product_id = 6202 (0x183a) (int)
usb_device.speed = 480.0 (480) (double)
usb_device.speed_bcd = 294912 (0x48000) (int)
usb_device.vendor = 'Ricoh Co., Ltd' (string)
usb_device.vendor_id = 1482 (0x5ca) (int)
usb_device.version = 2.0 (2) (double)
usb_device.version_bcd = 512 (0x200) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_5ca_183a_noserial_if1'
info.bus = 'usb' (string)
info.linux.driver = 'uvcvideo' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_5ca_183a_noserial' (string)
info.product = 'USB Video Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_5ca_183a_noserial_if1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3/3-2/3-2:1.1' (string)
usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = false (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 239 (0xef) (int)
usb.device_protocol = 1 (0x1) (int)
usb.device_revision_bcd = 256 (0x100) (int)
usb.device_subclass = 2 (0x2) (int)
usb.interface.class = 14 (0xe) (int)
usb.interface.number = 1 (0x1) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 2 (0x2) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 3 (0x3) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3/3-2/3-2:1.1' (string)
usb.max_power = 100 (0x64) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 2 (0x2) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Video Interface' (string)
usb.product_id = 6202 (0x183a) (int)
usb.speed = 480.0 (480) (double)
usb.speed_bcd = 294912 (0x48000) (int)
usb.vendor = 'Ricoh Co., Ltd' (string)
usb.vendor_id = 1482 (0x5ca) (int)
usb.version = 2.0 (2) (double)
usb.version_bcd = 512 (0x200) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_5ca_183a_noserial_if0'
info.bus = 'usb' (string)
info.linux.driver = 'uvcvideo' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_5ca_183a_noserial' (string)
info.product = 'USB Video Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_5ca_183a_noserial_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3/3-2/3-2:1.0' (string)
usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = false (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 239 (0xef) (int)
usb.device_protocol = 1 (0x1) (int)
usb.device_revision_bcd = 256 (0x100) (int)
usb.device_subclass = 2 (0x2) (int)
usb.interface.class = 14 (0xe) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 1 (0x1) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 3 (0x3) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3/3-2/3-2:1.0' (string)
usb.max_power = 100 (0x64) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 2 (0x2) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Video Interface' (string)
usb.product_id = 6202 (0x183a) (int)
usb.speed = 480.0 (480) (double)
usb.speed_bcd = 294912 (0x48000) (int)
usb.vendor = 'Ricoh Co., Ltd' (string)
usb.vendor_id = 1482 (0x5ca) (int)
usb.version = 2.0 (2) (double)
usb.version_bcd = 512 (0x200) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_5ca_183a_noserial_if0_video4linux'
access_control.file = '/dev/video0' (string)
access_control.type = 'video4linux' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'video4linux', 'video4linux.video_capture', 'access_control'} (string list)
info.category = 'video4linux' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_5ca_183a_noserial_if0' (string)
info.product = 'UVC Camera (05ca:183a)' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_5ca_183a_noserial_if0_video4linux' (string)
linux.device_file = '/dev/video0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'video4linux' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3/3-2/3-2:1.0/video4linux/video0' (string)
video4linux.device = '/dev/video0' (string)
video4linux.version = '1' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1a_7_if0'
info.bus = 'usb' (string)
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1a_7' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1a_7_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3/3-0:1.0' (string)
usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 1 (0x1) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3/3-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 4 (0x4) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 0 (0x0) (int)
usb.serial = '0000:00:1a.7' (string)
usb.speed = 480.0 (480) (double)
usb.speed_bcd = 294912 (0x48000) (int)
usb.vendor = 'Linux 2.6.24-19-generic ehci_hcd' (string)
usb.vendor_id = 0 (0x0) (int)
usb.version = 2.0 (2) (double)
usb.version_bcd = 512 (0x200) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2835'
info.linux.driver = 'uhci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) USB UHCI Controller #5' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2835' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1' (string)
pci.product = '82801H (ICH8 Family) USB UHCI Controller #5' (string)
pci.product_id = 10293 (0x2835) (int)
pci.subsys_product_id = 36872 (0x9008) (int)
pci.subsys_vendor = 'Sony Corporation' (string)
pci.subsys_vendor_id = 4173 (0x104d) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1a_1'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2835' (string)
info.product = 'UHCI Host Controller' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1a_1' (string)
info.vendor = 'Linux 2.6.24-19-generic uhci_hcd' (string)
linux.device_file = '/dev/bus/usb/002/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb2' (string)
usb_device.bus_number = 2 (0x2) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb2' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = 'UHCI Host Controller' (string)
usb_device.product_id = 0 (0x0) (int)
usb_device.serial = '0000:00:1a.1' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.speed_bcd = 4608 (0x1200) (int)
usb_device.vendor = 'Linux 2.6.24-19-generic uhci_hcd' (string)
usb_device.vendor_id = 0 (0x0) (int)
usb_device.version = 1.1 (1.1) (double)
usb_device.version_bcd = 272 (0x110) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1a_1_if0'
info.bus = 'usb' (string)
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1a_1' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1a_1_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-0:1.0' (string)
usb.bus_number = 2 (0x2) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 0 (0x0) (int)
usb.serial = '0000:00:1a.1' (string)
usb.speed = 12.0 (12) (double)
usb.speed_bcd = 4608 (0x1200) (int)
usb.vendor = 'Linux 2.6.24-19-generic uhci_hcd' (string)
usb.vendor_id = 0 (0x0) (int)
usb.version = 1.1 (1.1) (double)
usb.version_bcd = 272 (0x110) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2834'
info.linux.driver = 'uhci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) USB UHCI Controller #4' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2834' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0' (string)
pci.product = '82801H (ICH8 Family) USB UHCI Controller #4' (string)
pci.product_id = 10292 (0x2834) (int)
pci.subsys_product_id = 36872 (0x9008) (int)
pci.subsys_vendor = 'Sony Corporation' (string)
pci.subsys_vendor_id = 4173 (0x104d) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1a_0'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2834' (string)
info.product = 'UHCI Host Controller' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1a_0' (string)
info.vendor = 'Linux 2.6.24-19-generic uhci_hcd' (string)
linux.device_file = '/dev/bus/usb/001/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1' (string)
usb_device.bus_number = 1 (0x1) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = 'UHCI Host Controller' (string)
usb_device.product_id = 0 (0x0) (int)
usb_device.serial = '0000:00:1a.0' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.speed_bcd = 4608 (0x1200) (int)
usb_device.vendor = 'Linux 2.6.24-19-generic uhci_hcd' (string)
usb_device.vendor_id = 0 (0x0) (int)
usb_device.version = 1.1 (1.1) (double)
usb_device.version_bcd = 272 (0x110) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_147e_2016_noserial'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1a_0' (string)
info.product = 'Fingerprint Sensor' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_147e_2016_noserial' (string)
info.vendor = 'TouchStrip' (string)
linux.device_file = '/dev/bus/usb/001/002' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1' (string)
usb_device.bus_number = 1 (0x1) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 0 (0x0) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 1 (0x1) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = false (bool)
usb_device.linux.device_number = 2 (0x2) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1' (string)
usb_device.max_power = 100 (0x64) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product = 'Fingerprint Sensor' (string)
usb_device.product_id = 8214 (0x2016) (int)
usb_device.speed = 12.0 (12) (double)
usb_device.speed_bcd = 4608 (0x1200) (int)
usb_device.vendor = 'TouchStrip' (string)
usb_device.vendor_id = 5246 (0x147e) (int)
usb_device.version = 1.0 (1) (double)
usb_device.version_bcd = 256 (0x100) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_147e_2016_noserial_if0'
info.bus = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_147e_2016_noserial' (string)
info.product = 'USB Vendor Specific Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_147e_2016_noserial_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0' (string)
usb.bus_number = 1 (0x1) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 1 (0x1) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 255 (0xff) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0' (string)
usb.max_power = 100 (0x64) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Vendor Specific Interface' (string)
usb.product_id = 8214 (0x2016) (int)
usb.speed = 12.0 (12) (double)
usb.speed_bcd = 4608 (0x1200) (int)
usb.vendor = 'TouchStrip' (string)
usb.vendor_id = 5246 (0x147e) (int)
usb.version = 1.0 (1) (double)
usb.version_bcd = 256 (0x100) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1a_0_if0'
info.bus = 'usb' (string)
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1a_0' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1a_0_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-0:1.0' (string)
usb.bus_number = 1 (0x1) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 0 (0x0) (int)
usb.serial = '0000:00:1a.0' (string)
usb.speed = 12.0 (12) (double)
usb.speed_bcd = 4608 (0x1200) (int)
usb.vendor = 'Linux 2.6.24-19-generic uhci_hcd' (string)
usb.vendor_id = 0 (0x0) (int)
usb.version = 1.1 (1.1) (double)
usb.version_bcd = 272 (0x110) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2a03'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Mobile GM965/GL960 Integrated Graphics Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2a03' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1' (string)
pci.device_class = 3 (0x3) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 128 (0x80) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1' (string)
pci.product = 'Mobile GM965/GL960 Integrated Graphics Controller' (string)
pci.product_id = 10755 (0x2a03) (int)
pci.subsys_product_id = 36872 (0x9008) (int)
pci.subsys_vendor = 'Sony Corporation' (string)
pci.subsys_vendor_id = 4173 (0x104d) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2a02'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Mobile GM965/GL960 Integrated Graphics Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2a02' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0' (string)
pci.device_class = 3 (0x3) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0' (string)
pci.product = 'Mobile GM965/GL960 Integrated Graphics Controller' (string)
pci.product_id = 10754 (0x2a02) (int)
pci.subsys_product_id = 36872 (0x9008) (int)
pci.subsys_vendor = 'Sony Corporation' (string)
pci.subsys_vendor_id = 4173 (0x104d) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2a02_drm_i915_card0'
drm.dri_library = 'i915' (string)
info.capabilities = {'drm'} (string list)
info.category = 'drm' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2a02' (string)
info.product = 'Direct Rendering Manager Device' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2a02_drm_i915_card0' (string)
info.vendor = 'Intel Corporation' (string)
linux.device_file = '' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'drm' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/drm/card0' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_2a00'
info.linux.driver = 'agpgart-intel' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Mobile PM965/GM965/GL960 Memory Controller Hub' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2a00' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string)
pci.product = 'Mobile PM965/GM965/GL960 Memory Controller Hub' (string)
pci.product_id = 10752 (0x2a00) (int)
pci.subsys_product_id = 36872 (0x9008) (int)
pci.subsys_vendor = 'Sony Corporation' (string)
pci.subsys_vendor_id = 4173 (0x104d) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
Dumped 126 device(s) from the Global Device List.
------------------------------------------------
-------------- next part --------------
A non-text attachment was scrubbed...
Name: hal.log
Type: text/x-log
Size: 678980 bytes
Desc: not available
Url : http://lists.freedesktop.org/archives/hal/attachments/20081011/26e8a1f9/attachment-0002.bin
-------------- next part --------------
A non-text attachment was scrubbed...
Name: kern.log
Type: text/x-log
Size: 208906 bytes
Desc: not available
Url : http://lists.freedesktop.org/archives/hal/attachments/20081011/26e8a1f9/attachment-0003.bin
More information about the hal
mailing list