HAL freezes system on my ARM board

Jitesh Shah jiteshs at marvell.com
Thu Jul 30 05:11:02 PDT 2009


Oops, lshal.output was null. 
Reattaching ...

On Thu, 2009-07-30 at 17:35 +0530, Jitesh Shah wrote:
> Hi, 
> So, I just built HAL for ARM. (I am using the source's from the fedora's
> repo. No modifications were needed). But, whenever I start HAL the
> system freezes within 1-2 seconds. (Its not just that the I/O devices
> stop responding. The entire system just freezes). I have never had any
> experience with HAL and hence, cannot get very far with debugging it.
> How to debug HAL?
> 
> The first thing I did was to disable HAL in startup and start it
> manually as:
> /usr/sbin/hald --daemon=no --verbose=yes 
> (output attached. Might not be complete because the last lines could
> have been lost due to the system freeze. Not sure though)
> 
> There are some "/dev/(null)" values in the log? is it normal? I concede
> that I couldn't get much out of the log.
> 
> Also, attaching the lshal output and the /sys directory tree.
> 
> The HAL version I am using: hal-0.5.12-26.20090226git.fc11.armv5tel
> Environment: Fedora 11 on ARM (armv5te cpu) and kernel-2.6.29.4-167
> 
> Do point me in the right direction so that I have atleast a starting
> point to start nailing the issue. 
> 
> Regards,
> Jitesh
> 
-------------- next part --------------

Dumping 41 device(s) from the Global Device List:
-------------------------------------------------
udi = '/org/freedesktop/Hal/devices/computer'
  info.addons = {'hald-addon-cpufreq'} (string list)
  info.callouts.add = {'hal-acl-tool --remove-all', 'hal-storage-cleanup-all-mountpoints'} (string list)
  info.callouts.session_active = {'hal-acl-tool --reconfigure'} (string list)
  info.callouts.session_add = {'hal-acl-tool --reconfigure'} (string list)
  info.callouts.session_inactive = {'hal-acl-tool --reconfigure'} (string list)
  info.callouts.session_remove = {'hal-acl-tool --reconfigure'} (string list)
  info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement'} (string list)
  info.product = 'Computer'  (string)
  info.subsystem = 'unknown'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer'  (string)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list)
  power_management.can_hibernate = false  (bool)
  power_management.can_suspend = false  (bool)
  power_management.can_suspend_hybrid = false  (bool)
  power_management.can_suspend_to_disk = false  (bool)
  power_management.can_suspend_to_ram = false  (bool)
  power_management.is_powersave_set = false  (bool)
  power_management.quirk.dpms_on = true  (bool)
  power_management.quirk.dpms_suspend = true  (bool)
  power_management.quirk.vbe_post = true  (bool)
  power_management.quirk.vbemode_restore = true  (bool)
  power_management.quirk.vbestate_restore = true  (bool)
  power_management.quirk.vga_mode_3 = true  (bool)
  system.formfactor = 'unknown'  (string)
  system.hardware.primary_video.product = 9511  (0x2527)  (int)
  system.hardware.primary_video.vendor = 4139  (0x102b)  (int)
  system.kernel.machine = 'armv5tel'  (string)
  system.kernel.name = 'Linux'  (string)
  system.kernel.version = '2.6.30'  (string)
  system.kernel.version.major = 2  (0x2)  (int)
  system.kernel.version.micro = 30  (0x1e)  (int)
  system.kernel.version.minor = 6  (0x6)  (int)

udi = '/org/freedesktop/Hal/devices/net_computer_loopback'
  info.capabilities = {'net', 'net.loopback'} (string list)
  info.category = 'net.loopback'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Loopback device Interface'  (string)
  info.subsystem = 'net'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_computer_loopback'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/devices/virtual/net/lo'  (string)
  net.address = '00:00:00:00:00:00'  (string)
  net.arp_proto_hw_id = 772  (0x304)  (int)
  net.interface = 'lo'  (string)
  net.linux.ifindex = 1  (0x1)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)
  net.physical_device = '/org/freedesktop/Hal/devices/computer'  (string)

udi = '/org/freedesktop/Hal/devices/platform_serial8250_0'
  info.linux.driver = 'serial8250'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (serial8250.0)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_serial8250_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/serial8250.0'  (string)
  platform.id = 'serial8250.0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_serial8250_0_serial_platform_0'
  access_control.file = '/dev/ttyS0'  (string)
  access_control.type = 'modem'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'serial', 'access_control'} (string list)
  info.category = 'serial'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_serial8250_0'  (string)
  info.product = 'Platform Device (serial8250.0)'  (string)
  info.subsystem = 'tty'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_serial8250_0_serial_platform_0'  (string)
  linux.device_file = '/dev/ttyS0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'tty'  (string)
  linux.sysfs_path = '/sys/devices/platform/serial8250.0/tty/ttyS0'  (string)
  serial.device = '/dev/ttyS0'  (string)
  serial.originating_device = '/org/freedesktop/Hal/devices/platform_serial8250_0'  (string)
  serial.port = 0  (0x0)  (int)
  serial.type = 'platform'  (string)

udi = '/org/freedesktop/Hal/devices/platform_serial8250'
  info.linux.driver = 'serial8250'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (serial8250)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_serial8250'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/serial8250'  (string)
  platform.id = 'serial8250'  (string)

udi = '/org/freedesktop/Hal/devices/platform_sata_mv_0'
  info.linux.driver = 'sata_mv'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (sata_mv.0)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_sata_mv_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/sata_mv.0'  (string)
  platform.id = 'sata_mv.0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_sata_mv_0_scsi_host_0'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_sata_mv_0'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_sata_mv_0_scsi_host_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/platform/sata_mv.0/host1/scsi_host/host1'  (string)
  scsi_host.host = 1  (0x1)  (int)

udi = '/org/freedesktop/Hal/devices/platform_sata_mv_0_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_sata_mv_0'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_sata_mv_0_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/platform/sata_mv.0/host0/scsi_host/host0'  (string)
  scsi_host.host = 0  (0x0)  (int)

udi = '/org/freedesktop/Hal/devices/platform_rtc_mv'
  info.linux.driver = 'rtc-mv'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (rtc-mv)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_rtc_mv'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/rtc-mv'  (string)
  platform.id = 'rtc-mv'  (string)

udi = '/org/freedesktop/Hal/devices/platform_regulatory_0'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (regulatory.0)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_regulatory_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/regulatory.0'  (string)
  platform.id = 'regulatory.0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_orion_nand'
  info.linux.driver = 'orion_nand'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (orion_nand)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_orion_nand'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/orion_nand'  (string)
  platform.id = 'orion_nand'  (string)

udi = '/org/freedesktop/Hal/devices/platform_orion_ehci_0'
  info.linux.driver = 'orion-ehci'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (orion-ehci.0)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_orion_ehci_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/orion-ehci.0'  (string)
  platform.id = 'orion-ehci.0'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_orion_ehci_0'
  info.bus = 'usb_device'  (string)
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_orion_ehci_0'  (string)
  info.product = '2.0 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_orion_ehci_0'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/001/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/platform/orion-ehci.0/usb1'  (string)
  usb_device.bus_number = 1  (0x1)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 1  (0x1)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/platform/orion-ehci.0/usb1'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 1  (0x1)  (int)
  usb_device.product = '2.0 root hub'  (string)
  usb_device.product_id = 2  (0x2)  (int)
  usb_device.serial = 'orion-ehci.0'  (string)
  usb_device.speed = 480.0 (480) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_orion_ehci_0_usbraw'
  info.bus = 'usb_device'  (string)
  info.capabilities = {'usbraw'} (string list)
  info.category = 'usbraw'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_orion_ehci_0'  (string)
  info.product = 'USB Raw Device Access'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_orion_ehci_0_usbraw'  (string)
  linux.device_file = '/dev/usbdev1.1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb_device'  (string)
  linux.sysfs_path = '/sys/devices/platform/orion-ehci.0/usb1/usb_device/usbdev1.1'  (string)
  usbraw.device = '/dev/usbdev1.1'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_409_5a_noserial'
  info.bus = 'usb_device'  (string)
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_orion_ehci_0'  (string)
  info.product = 'HighSpeed Hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_409_5a_noserial'  (string)
  info.vendor = 'NEC Corp.'  (string)
  linux.device_file = '/dev/bus/usb/001/002'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/platform/orion-ehci.0/usb1/1-1'  (string)
  usb_device.bus_number = 1  (0x1)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 1  (0x1)  (int)
  usb_device.device_revision_bcd = 256  (0x100)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 2  (0x2)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/platform/orion-ehci.0/usb1/1-1'  (string)
  usb_device.max_power = 100  (0x64)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 4  (0x4)  (int)
  usb_device.product = 'HighSpeed Hub'  (string)
  usb_device.product_id = 90  (0x5a)  (int)
  usb_device.speed = 480.0 (480) (double)
  usb_device.vendor = 'NEC Corp.'  (string)
  usb_device.vendor_id = 1033  (0x409)  (int)
  usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_409_5a_noserial_usbraw'
  info.bus = 'usb_device'  (string)
  info.capabilities = {'usbraw'} (string list)
  info.category = 'usbraw'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_409_5a_noserial'  (string)
  info.product = 'USB Raw Device Access'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_409_5a_noserial_usbraw'  (string)
  linux.device_file = '/dev/usbdev1.2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb_device'  (string)
  linux.sysfs_path = '/sys/devices/platform/orion-ehci.0/usb1/1-1/usb_device/usbdev1.2'  (string)
  usbraw.device = '/dev/usbdev1.2'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_409_5a_noserial_if0'
  info.bus = 'usb'  (string)
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_409_5a_noserial'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_409_5a_noserial_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/platform/orion-ehci.0/usb1/1-1/1-1:1.0'  (string)
  usb.bus_number = 1  (0x1)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 1  (0x1)  (int)
  usb.device_revision_bcd = 256  (0x100)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 2  (0x2)  (int)
  usb.linux.sysfs_path = '/sys/devices/platform/orion-ehci.0/usb1/1-1/1-1:1.0'  (string)
  usb.max_power = 100  (0x64)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 4  (0x4)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 90  (0x5a)  (int)
  usb.speed = 480.0 (480) (double)
  usb.vendor = 'NEC Corp.'  (string)
  usb.vendor_id = 1033  (0x409)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_46d_c019_noserial'
  info.bus = 'usb_device'  (string)
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_409_5a_noserial'  (string)
  info.product = 'Optical Tilt Wheel Mouse'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c019_noserial'  (string)
  info.vendor = 'Logitech, Inc.'  (string)
  linux.device_file = '/dev/bus/usb/001/006'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/platform/orion-ehci.0/usb1/1-1/1-1.4'  (string)
  usb_device.bus_number = 1  (0x1)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 0  (0x0)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 17153  (0x4301)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = false  (bool)
  usb_device.linux.device_number = 6  (0x6)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/platform/orion-ehci.0/usb1/1-1/1-1.4'  (string)
  usb_device.max_power = 100  (0x64)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 0  (0x0)  (int)
  usb_device.product = 'Optical Tilt Wheel Mouse'  (string)
  usb_device.product_id = 49177  (0xc019)  (int)
  usb_device.speed = 1.5 (1.5) (double)
  usb_device.vendor = 'Logitech, Inc.'  (string)
  usb_device.vendor_id = 1133  (0x46d)  (int)
  usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_46d_c019_noserial_usbraw'
  info.bus = 'usb_device'  (string)
  info.capabilities = {'usbraw'} (string list)
  info.category = 'usbraw'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c019_noserial'  (string)
  info.product = 'USB Raw Device Access'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c019_noserial_usbraw'  (string)
  linux.device_file = '/dev/usbdev1.6'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb_device'  (string)
  linux.sysfs_path = '/sys/devices/platform/orion-ehci.0/usb1/1-1/1-1.4/usb_device/usbdev1.6'  (string)
  usbraw.device = '/dev/usbdev1.6'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_46d_c019_noserial_if0'
  info.bus = 'usb'  (string)
  info.linux.driver = 'usbhid'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c019_noserial'  (string)
  info.product = 'USB HID Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c019_noserial_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/platform/orion-ehci.0/usb1/1-1/1-1.4/1-1.4:1.0'  (string)
  usb.bus_number = 1  (0x1)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 0  (0x0)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 17153  (0x4301)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 3  (0x3)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 2  (0x2)  (int)
  usb.interface.subclass = 1  (0x1)  (int)
  usb.is_self_powered = false  (bool)
  usb.linux.device_number = 6  (0x6)  (int)
  usb.linux.sysfs_path = '/sys/devices/platform/orion-ehci.0/usb1/1-1/1-1.4/1-1.4:1.0'  (string)
  usb.max_power = 100  (0x64)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB HID Interface'  (string)
  usb.product_id = 49177  (0xc019)  (int)
  usb.speed = 1.5 (1.5) (double)
  usb.vendor = 'Logitech, Inc.'  (string)
  usb.vendor_id = 1133  (0x46d)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_46d_c019_noserial_if0_logicaldev_input'
  access_control.file = '/dev/input/event1'  (string)
  access_control.type = 'mouse'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'input', 'input.mouse', 'access_control'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c019_noserial_if0'  (string)
  info.product = 'Logitech USB Optical Mouse'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c019_noserial_if0_logicaldev_input'  (string)
  input.device = '/dev/input/event1'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/usb_device_46d_c019_noserial_if0'  (string)
  input.product = 'Logitech USB Optical Mouse'  (string)
  input.x11_driver = 'evdev'  (string)
  linux.device_file = '/dev/input/event1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/platform/orion-ehci.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input3/event1'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_46d_c315_noserial'
  info.bus = 'usb_device'  (string)
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_409_5a_noserial'  (string)
  info.product = 'Classic New Touch Keyboard'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c315_noserial'  (string)
  info.vendor = 'Logitech, Inc.'  (string)
  linux.device_file = '/dev/bus/usb/001/005'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/platform/orion-ehci.0/usb1/1-1/1-1.3'  (string)
  usb_device.bus_number = 1  (0x1)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 0  (0x0)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 10240  (0x2800)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = false  (bool)
  usb_device.linux.device_number = 5  (0x5)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/platform/orion-ehci.0/usb1/1-1/1-1.3'  (string)
  usb_device.max_power = 100  (0x64)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 0  (0x0)  (int)
  usb_device.product = 'Classic New Touch Keyboard'  (string)
  usb_device.product_id = 49941  (0xc315)  (int)
  usb_device.speed = 1.5 (1.5) (double)
  usb_device.vendor = 'Logitech, Inc.'  (string)
  usb_device.vendor_id = 1133  (0x46d)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_46d_c315_noserial_usbraw'
  info.bus = 'usb_device'  (string)
  info.capabilities = {'usbraw'} (string list)
  info.category = 'usbraw'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c315_noserial'  (string)
  info.product = 'USB Raw Device Access'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c315_noserial_usbraw'  (string)
  linux.device_file = '/dev/usbdev1.5'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb_device'  (string)
  linux.sysfs_path = '/sys/devices/platform/orion-ehci.0/usb1/1-1/1-1.3/usb_device/usbdev1.5'  (string)
  usbraw.device = '/dev/usbdev1.5'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_46d_c315_noserial_if0'
  info.bus = 'usb'  (string)
  info.linux.driver = 'usbhid'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c315_noserial'  (string)
  info.product = 'USB HID Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c315_noserial_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/platform/orion-ehci.0/usb1/1-1/1-1.3/1-1.3:1.0'  (string)
  usb.bus_number = 1  (0x1)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 0  (0x0)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 10240  (0x2800)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 3  (0x3)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 1  (0x1)  (int)
  usb.interface.subclass = 1  (0x1)  (int)
  usb.is_self_powered = false  (bool)
  usb.linux.device_number = 5  (0x5)  (int)
  usb.linux.sysfs_path = '/sys/devices/platform/orion-ehci.0/usb1/1-1/1-1.3/1-1.3:1.0'  (string)
  usb.max_power = 100  (0x64)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 0  (0x0)  (int)
  usb.product = 'USB HID Interface'  (string)
  usb.product_id = 49941  (0xc315)  (int)
  usb.speed = 1.5 (1.5) (double)
  usb.vendor = 'Logitech, Inc.'  (string)
  usb.vendor_id = 1133  (0x46d)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_46d_c315_noserial_if0_logicaldev_input'
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.callouts.add = {'fedora-setup-keyboard'} (string list)
  info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c315_noserial_if0'  (string)
  info.product = 'Logitech Logitech USB Keyboard'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c315_noserial_if0_logicaldev_input'  (string)
  input.device = '/dev/input/event0'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/usb_device_46d_c315_noserial_if0'  (string)
  input.product = 'Logitech Logitech USB Keyboard'  (string)
  input.x11_driver = 'evdev'  (string)
  input.xkb.layout = 'us'  (string)
  input.xkb.model = 'pc105+inet'  (string)
  input.xkb.options = 'terminate:ctrl_alt_bksp'  (string)
  input.xkb.rules = 'base'  (string)
  input.xkb.variant = ''  (string)
  linux.device_file = '/dev/input/event0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/platform/orion-ehci.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input2/event0'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_orion_ehci_0_if0'
  info.bus = 'usb'  (string)
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_orion_ehci_0'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_orion_ehci_0_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/platform/orion-ehci.0/usb1/1-0:1.0'  (string)
  usb.bus_number = 1  (0x1)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 1  (0x1)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/platform/orion-ehci.0/usb1/1-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 1  (0x1)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 2  (0x2)  (int)
  usb.serial = 'orion-ehci.0'  (string)
  usb.speed = 480.0 (480) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/platform_mvsdio'
  info.linux.driver = 'mvsdio'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (mvsdio)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_mvsdio'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/mvsdio'  (string)
  platform.id = 'mvsdio'  (string)

udi = '/org/freedesktop/Hal/devices/platform_mvsdio_mmc_host'
  info.capabilities = {'mmc_host'} (string list)
  info.category = 'mmc_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_mvsdio'  (string)
  info.product = 'MMC/SD Host Adapter'  (string)
  info.subsystem = 'mmc_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_mvsdio_mmc_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'mmc_host'  (string)
  linux.sysfs_path = '/sys/devices/platform/mvsdio/mmc_host/mmc0'  (string)
  mmc_host.host = 0  (0x0)  (int)

udi = '/org/freedesktop/Hal/devices/platform_mv_xor_shared_1'
  info.linux.driver = 'mv_xor_shared'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (mv_xor_shared.1)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_mv_xor_shared_1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/mv_xor_shared.1'  (string)
  platform.id = 'mv_xor_shared.1'  (string)

udi = '/org/freedesktop/Hal/devices/platform_mv_xor_shared_0'
  info.linux.driver = 'mv_xor_shared'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (mv_xor_shared.0)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_mv_xor_shared_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/mv_xor_shared.0'  (string)
  platform.id = 'mv_xor_shared.0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_mv_xor_3'
  info.linux.driver = 'mv_xor'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (mv_xor.3)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_mv_xor_3'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/mv_xor.3'  (string)
  platform.id = 'mv_xor.3'  (string)

udi = '/org/freedesktop/Hal/devices/platform_mv_xor_2'
  info.linux.driver = 'mv_xor'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (mv_xor.2)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_mv_xor_2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/mv_xor.2'  (string)
  platform.id = 'mv_xor.2'  (string)

udi = '/org/freedesktop/Hal/devices/platform_mv_xor_1'
  info.linux.driver = 'mv_xor'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (mv_xor.1)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_mv_xor_1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/mv_xor.1'  (string)
  platform.id = 'mv_xor.1'  (string)

udi = '/org/freedesktop/Hal/devices/platform_mv_xor_0'
  info.linux.driver = 'mv_xor'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (mv_xor.0)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_mv_xor_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/mv_xor.0'  (string)
  platform.id = 'mv_xor.0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_mv643xx_eth_port_0'
  info.linux.driver = 'mv643xx_eth_port'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (mv643xx_eth_port.0)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_mv643xx_eth_port_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/mv643xx_eth_port.0'  (string)
  platform.id = 'mv643xx_eth_port.0'  (string)

udi = '/org/freedesktop/Hal/devices/net_00_00_00_00_51_81'
  info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list)
  info.category = 'net.80203'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/platform_mv643xx_eth_port_0'  (string)
  info.product = 'Networking Interface'  (string)
  info.subsystem = 'net'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_00_00_00_00_51_81'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/devices/platform/mv643xx_eth_port.0/net/eth0'  (string)
  net.80203.mac_address = 20865  (0x5181)  (uint64)
  net.address = '00:00:00:00:51:81'  (string)
  net.arp_proto_hw_id = 1  (0x1)  (int)
  net.interface = 'eth0'  (string)
  net.linux.ifindex = 2  (0x2)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/platform_mv643xx_eth_port_0'  (string)
  net.physical_device = '/org/freedesktop/Hal/devices/platform_mv643xx_eth_port_0'  (string)
  org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list)
  org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list)
  org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list)
  org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list)

udi = '/org/freedesktop/Hal/devices/platform_mv643xx_eth_0'
  info.linux.driver = 'mv643xx_eth'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (mv643xx_eth.0)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_mv643xx_eth_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/mv643xx_eth.0'  (string)
  platform.id = 'mv643xx_eth.0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_104c_8231'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'XIO2000(A)/XIO2200(A) PCI Express-to-PCI Bridge'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_104c_8231'  (string)
  info.vendor = 'Texas Instruments'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0'  (string)
  pci.product = 'XIO2000(A)/XIO2200(A) PCI Express-to-PCI Bridge'  (string)
  pci.product_id = 33329  (0x8231)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Texas Instruments'  (string)
  pci.vendor_id = 4172  (0x104c)  (int)

udi = '/org/freedesktop/Hal/devices/pci_102b_2527'
  info.linux.driver = 'matroxfb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_104c_8231'  (string)
  info.product = 'MGA G550 AGP'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_102b_2527'  (string)
  info.vendor = 'Matrox Graphics, Inc.'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'  (string)
  pci.device_class = 3  (0x3)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'  (string)
  pci.product = 'MGA G550 AGP'  (string)
  pci.product_id = 9511  (0x2527)  (int)
  pci.subsys_product_id = 8896  (0x22c0)  (int)
  pci.subsys_vendor = 'Matrox Graphics, Inc.'  (string)
  pci.subsys_vendor_id = 4139  (0x102b)  (int)
  pci.vendor = 'Matrox Graphics, Inc.'  (string)
  pci.vendor_id = 4139  (0x102b)  (int)

udi = '/org/freedesktop/Hal/devices/pci_102b_2527_drm__null__card0'
  access_control.file = '/dev/dri/card0'  (string)
  access_control.type = 'video'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'drm', 'access_control'} (string list)
  info.category = 'drm'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_102b_2527'  (string)
  info.product = 'Direct Rendering Manager Device'  (string)
  info.subsystem = 'drm'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_102b_2527_drm__null__card0'  (string)
  info.vendor = 'Matrox Graphics, Inc.'  (string)
  linux.device_file = '/dev/dri/card0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'drm'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_11ab_6281'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Unknown (0x6281)'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_11ab_6281'  (string)
  info.vendor = 'Marvell Technology Group Ltd.'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'  (string)
  pci.device_class = 5  (0x5)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 128  (0x80)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'  (string)
  pci.product_id = 25217  (0x6281)  (int)
  pci.subsys_product_id = 4523  (0x11ab)  (int)
  pci.subsys_vendor = 'Marvell Technology Group Ltd.'  (string)
  pci.subsys_vendor_id = 4523  (0x11ab)  (int)
  pci.vendor = 'Marvell Technology Group Ltd.'  (string)
  pci.vendor_id = 4523  (0x11ab)  (int)


Dumped 41 device(s) from the Global Device List.
------------------------------------------------



More information about the hal mailing list