[igt-dev] [PATCH i-g-t v3] test/kms_dp_dsc: Basic KMS test to validate VESA DSC on DP/eDP
Manasi Navare
manasi.d.navare at intel.com
Tue Dec 4 19:08:23 UTC 2018
On Tue, Dec 04, 2018 at 01:07:23PM +0200, Petri Latvala wrote:
> On Mon, Dec 03, 2018 at 07:10:51PM -0800, Manasi Navare wrote:
> > This patch adds a basic kms test to validate the display stream
> > compression functionality if supported on DP/eDP connector.
> > Currently this has only two subtests to force the DSC on all
> > the eDP and DP connectors that support it with default parameters.
> > This will be expanded to add more subtests to tweak DSC parameters.
> >
> > This uses the debugfs nodes added in the patch:
> > https://patchwork.freedesktop.org/series/53449/
> >
> > v3:
> > * Use array of connectors and loop through (Petri)
> > * Also check for FEC on DP connectors (Manasi)
> > * Add a Pipe_A restriction on DP (Ville)
> > v2:
> > * Use IGT wrappers for all (DK, Antonio)
> > * Split into two subtests for eDP and DP types (Petri)
> >
> > Cc: Petri Latvala <petri.latvala at intel.com>
> > Cc: Antonio Argenziano <antonio.argenziano at intel.com>
> > Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
> > Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > Cc: Anusha Srivatsa <anusha.srivatsa at intel.com>
> > Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
> > ---
> > tests/Makefile.sources | 1 +
> > tests/kms_dp_dsc.c | 261 +++++++++++++++++++++++++++++++++++++++++
> > tests/meson.build | 1 +
> > 3 files changed, 263 insertions(+)
> > create mode 100644 tests/kms_dp_dsc.c
> >
> > diff --git a/tests/Makefile.sources b/tests/Makefile.sources
> > index d007ebc7..2a5b1c7f 100644
> > --- a/tests/Makefile.sources
> > +++ b/tests/Makefile.sources
> > @@ -88,6 +88,7 @@ TESTS_progs = \
> > kms_universal_plane \
> > kms_vblank \
> > kms_sequence \
> > + kms_dp_dsc \
> > meta_test \
> > perf \
> > perf_pmu \
>
> Alphabetically ordered please.
Yes will fix this ordering and move kms_dp_dsc up
>
>
> > diff --git a/tests/kms_dp_dsc.c b/tests/kms_dp_dsc.c
> > new file mode 100644
> > index 00000000..d2710dde
> > --- /dev/null
> > +++ b/tests/kms_dp_dsc.c
> > @@ -0,0 +1,261 @@
> > +/*
> > + * Copyright © 2018 Intel Corporation
> > + *
> > + * Permission is hereby granted, free of charge, to any person obtaining a
> > + * copy of this software and associated documentation files (the "Software"),
> > + * to deal in the Software without restriction, including without limitation
> > + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> > + * and/or sell copies of the Software, and to permit persons to whom the
> > + * Software is furnished to do so, subject to the following conditions:
> > + *
> > + * The above copyright notice and this permission notice (including the next
> > + * paragraph) shall be included in all copies or substantial portions of the
> > + * Software.
> > + *
> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> > + * IN THE SOFTWARE.
> > + *
> > + * Displayport Display Stream Compression test
> > + * Until the CRC support is added this needs to be invoked with --interactive
> > + * to manually verify if the test pattern is seen without corruption for each
> > + * subtest.
> > + *
> > + * Authors:
> > + * Manasi Navare <manasi.d.navare at intel.com>
> > + *
> > + */
> > +#include "igt.h"
> > +#include "igt_sysfs.h"
> > +#include <errno.h>
> > +#include <getopt.h>
> > +#include <math.h>
> > +#include <stdint.h>
> > +#include <stdbool.h>
> > +#include <strings.h>
> > +#include <unistd.h>
> > +#include <stdlib.h>
> > +#include <signal.h>
> > +#include <time.h>
> > +#include <fcntl.h>
> > +#include <termios.h>
> > +
> > +enum dsc_test_type
> > +{
> > + test_basic_dsc_enable
> > +};
> > +
> > +typedef struct {
> > + int drm_fd;
> > + int debugfs_fd;
> > + uint32_t id;
> > + igt_display_t display;
> > + struct igt_fb fb_test_pattern;
> > + igt_output_t *output;
> > + int mode_valid;
> > + drmModeModeInfo *mode;
> > + drmModeConnector *connector;
> > + drmModeEncoder *encoder;
> > + int crtc;
> > + enum pipe pipe;
> > + char conn_name[128];
> > +} data_t;
> > +
> > +static inline void manual(const char *expected)
> > +{
> > + igt_debug_manual_check("all", expected);
> > +}
> > +
> > +static bool is_dp_dsc_supported(data_t *data)
> > +{
> > + char file_name[128] = {0};
> > + char buf[512];
> > +
> > + strcpy(file_name, data->conn_name);
> > + strcat(file_name, "/i915_dsc_fec_support");
> > + igt_require(igt_debugfs_simple_read(data->debugfs_fd, file_name, buf,
> > + sizeof(buf)) > 0);
> > + igt_debugfs_read(data->drm_fd, file_name, buf);
> > +
> > + return strstr(buf, "DSC_Sink_Support: yes");
> > +
> > +}
> > +
> > +static bool is_dp_fec_supported(data_t *data)
> > +{
> > + char file_name[128] = {0};
> > + char buf[512];
> > +
> > + strcpy(file_name, data->conn_name);
> > + strcat(file_name, "/i915_dsc_fec_support");
> > + igt_debugfs_read(data->drm_fd, file_name, buf);
> > +
> > + return strstr(buf, "FEC_Sink_Support: yes");
> > +
> > +}
> > +
> > +static bool is_dp_dsc_enabled(data_t *data)
> > +{
> > + char file_name[128] = {0};
> > + char buf[512];
> > +
> > + strcpy(file_name, data->conn_name);
> > + strcat(file_name, "/i915_dsc_fec_support");
> > + igt_debugfs_read(data->drm_fd, file_name, buf);
> > +
> > + return strstr(buf, "DSC_Enabled: yes");
> > +
> > +}
>
> Remove extra empty lines after return statements in the above three
> functions.
Yes will do
>
>
> > +
> > +static void force_dp_dsc_enable(data_t *data)
> > +{
> > + char file_name[128] = {0};
> > + int ret;
> > +
> > + strcpy(file_name, data->conn_name);
> > + strcat(file_name, "/i915_dsc_fec_support");
> > + igt_debug ("Forcing DSC enable on %s\n", data->conn_name);
> > + ret = igt_sysfs_write(data->debugfs_fd, file_name, "1", 1);
> > + igt_assert_f(ret > 0, "debugfs_write failed");
> > +}
> > +
> > +static void clear_dp_dsc_enable(data_t *data)
> > +{
> > + char file_name[128] = {0};
> > + int ret;
> > +
> > + strcpy(file_name, data->conn_name);
> > + strcat(file_name, "/i915_dsc_fec_support");
> > + igt_debug ("Clearing DSC enable on %s\n", data->conn_name);
> > + ret = igt_sysfs_write(data->debugfs_fd, file_name, "0", 1);
> > + igt_assert_f(ret > 0, "debugfs_write failed");
> > +}
> > +
> > +static void test_cleanup(data_t *data) {
> > + igt_plane_t *primary;
> > +
> > + primary = igt_output_get_plane_type(data->output,
> > + DRM_PLANE_TYPE_PRIMARY);
> > + igt_plane_set_fb(primary, NULL);
> > + igt_display_commit(&data->display);
> > +
> > + igt_remove_fb(data->drm_fd, &data->fb_test_pattern);
> > +}
> > +
> > +
> > +/*
> > + * Re-probe connectors and do a modeset with DSC
> > + *
> > + */
> > +static void update_display(data_t *data, enum dsc_test_type test_type)
> > +{
> > + igt_plane_t *primary;
> > + data->mode = igt_output_get_mode(data->output);
> > + data->connector = data->output->config.connector;
> > +
> > + if (data->connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort &&
> > + data->pipe == PIPE_A) {
> > + igt_debug ("DSC not supported on Pipe A on external DP\n");
> > + return;
> > + }
> > +
> > + if (test_type == test_basic_dsc_enable) {
> > + igt_debug ("DSC is supported on %s\n",
> > + data->conn_name);
> > + force_dp_dsc_enable(data);
> > + igt_create_pattern_fb(data->drm_fd, data->mode->hdisplay,
> > + data->mode->vdisplay,
> > + DRM_FORMAT_XRGB8888,
> > + LOCAL_DRM_FORMAT_MOD_NONE,
> > + &data->fb_test_pattern);
> > + primary = igt_output_get_plane_type(data->output,
> > + DRM_PLANE_TYPE_PRIMARY);
> > + igt_plane_set_fb(primary, &data->fb_test_pattern);
> > + igt_display_commit(&data->display);
> > + /* Until we have CRC check support, manually check if RGB test pattern has no corruption */
> > + manual ("RGB test pattern without corruption");
> > + igt_assert_f(is_dp_dsc_enabled(data),
> > + "Default DSC enable failed on Connector: %s Pipe: %s",
> > + data->conn_name,
> > + kmstest_pipe_name(data->pipe));
> > + clear_dp_dsc_enable(data);
> > + }
>
> Can we future-proof this with an
>
> } else {
> igt_assert(!"Unknown test type");
> }
>
Yes thats a good idea
>
> > +
> > +}
> > +
> > +static void run_test(data_t *data, igt_output_t *output,
> > + enum dsc_test_type test_type)
> > +{
> > + enum pipe pipe;
> > +
> > + for_each_pipe_with_valid_output(&data->display, pipe, output) {
> > + igt_output_set_pipe(output, pipe);
> > + data->pipe = pipe;
> > + data->output = output;
> > + update_display(data, test_basic_dsc_enable);
>
> Should this be passing the test_type parameter instead of hardcoding
> test_basic_dsc_enable?
>
Oh yes sorry missed this part when I was modularizing the functions
>
> > + }
> > +}
> > +
> > +igt_main
> > +{
> > + data_t data = {};
> > + igt_output_t *output;
> > + drmModeRes *res;
> > + drmModeConnector *connector;
> > + int i, test_conn_cnt, test_cnt;
> > + int tests[] = {DRM_MODE_CONNECTOR_eDP, DRM_MODE_CONNECTOR_DisplayPort};
> > +
> > + igt_fixture {
> > + igt_skip_on_simulation();
>
> Remove igt_skip_on_simulation if there's not a good reason for
> it. When in doubt, there isn't.
But we cant test the display on simulation so it will have to be skipped.
>
>
> > + data.drm_fd = drm_open_driver_master(DRIVER_ANY);
> > + data.debugfs_fd = igt_debugfs_dir(data.drm_fd);
> > + kmstest_set_vt_graphics_mode();
> > + igt_display_init(&data.display, data.drm_fd);
>
> commit 5105f068f6525f4d863719acf754891442eed254
> Author: Daniel Vetter <daniel.vetter at ffwll.ch>
> Date: Thu Nov 22 10:36:58 2018 +0100
>
> lib/kms: Drop igt_display_init
>
>
> You need to change this call to igt_display_require.
Okay will do, do I also need igt_display_require_output() call after this?
>
>
>
> > + igt_display_require_output(&data.display);
> > + igt_require(res = drmModeGetResources(data.drm_fd));
> > + }
> > +
> > + for (test_cnt = 0; test_cnt < ARRAY_SIZE(tests); test_cnt++) {
> > +
> > + igt_subtest_f("basic-dsc-enable-%s",
> > + kmstest_connector_type_str(tests[test_cnt])) {
> > + test_conn_cnt = 0;
> > + for (i = 0; i < res->count_connectors; i++) {
> > + connector = drmModeGetConnectorCurrent(data.drm_fd,
> > + res->connectors[i]);
> > + if (connector->connection != DRM_MODE_CONNECTED ||
> > + connector->connector_type !=
> > + tests[test_cnt])
> > + continue;
> > + test_conn_cnt++;
> > + output = igt_output_from_connector(&data.display, connector);
> > + sprintf(data.conn_name, "%s-%d",
> > + kmstest_connector_type_str(connector->connector_type),
> > + test_conn_cnt);
> > + igt_require_f(is_dp_dsc_supported(&data),
> > + "DSC not supported on connector %s \n",
> > + data.conn_name);
> > + if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort)
> > + igt_require_f(is_dp_fec_supported(&data),
> > + "DSC cannot be enabled without FEC on %s\n",
> > + data.conn_name);
> > + run_test(&data, output, test_basic_dsc_enable);
> > + }
> > + test_cleanup(&data);
> > + igt_skip_on(test_conn_cnt == 0);
> > + }
> > + }
> > +
> > + igt_fixture {
> > + drmModeFreeConnector(connector);
> > + drmModeFreeResources(res);
> > + close(data.debugfs_fd);
> > + close(data.drm_fd);
> > + igt_display_fini(&data.display);
> > + }
> > + igt_exit();
> > +}
> > diff --git a/tests/meson.build b/tests/meson.build
> > index 3020f798..dde4270c 100644
> > --- a/tests/meson.build
> > +++ b/tests/meson.build
> > @@ -32,6 +32,7 @@ test_progs = [
> > 'kms_cursor_crc',
> > 'kms_cursor_legacy',
> > 'kms_draw_crc',
> > + 'kms_dp_dsc',
> > 'kms_fbcon_fbt',
>
> Alphabetical ordering off-by-one.
Gotcha, will fix it!
Thanks for the review
Manasi
>
>
>
>
> --
> Petri Latvala
More information about the igt-dev
mailing list