[igt-dev] [PATCH igt v2] igt/perf_pmu: Use a self-correcting busy pwm
Chris Wilson
chris at chris-wilson.co.uk
Wed Feb 21 10:48:44 UTC 2018
Quoting Tvrtko Ursulin (2018-02-21 10:39:29)
>
> On 20/02/2018 13:50, Chris Wilson wrote:
> > Convert the busy pwm from using a single calibration pass with a fixed
> > target into a self-correcting pwm that tries to adjust how long to sleep
> > on each pwm in order to converge at the target busy %%.
> >
> > Being self-correcting, it should fare better against the more variable
> > systems CI presents.
> >
> > v2: Be fair and equally strict for low/high busy %%
> >
> > Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105157
> > Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
> > Cc: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
> > ---
> > tests/perf_pmu.c | 64 ++++++++++++++++++++++----------------------------------
> > 1 file changed, 25 insertions(+), 39 deletions(-)
> >
> > diff --git a/tests/perf_pmu.c b/tests/perf_pmu.c
> > index 7fab73e2..0beb9197 100644
> > --- a/tests/perf_pmu.c
> > +++ b/tests/perf_pmu.c
> > @@ -1422,9 +1422,10 @@ accuracy(int gem_fd, const struct intel_execution_engine2 *e,
> > busy_us / 100) / target_busy_pct;
> > unsigned long pwm_calibration_us;
> > unsigned long test_us;
> > - double busy_r;
> > + double busy_r, expected;
> > uint64_t val[2];
> > uint64_t ts[2];
> > + int link[2];
> > int fd;
> >
> > /* Sampling platforms cannot reach the high accuracy criteria. */
> > @@ -1450,14 +1451,16 @@ accuracy(int gem_fd, const struct intel_execution_engine2 *e,
> > assert_within_epsilon((double)busy_us / (busy_us + idle_us),
> > (double)target_busy_pct / 100.0, tolerance);
> >
> > + igt_assert(pipe(link) == 0);
> > +
> > /* Emit PWM pattern on the engine from a child. */
> > igt_fork(child, 1) {
> > struct sched_param rt = { .sched_priority = 99 };
> > - const unsigned long timeout[] = { pwm_calibration_us * 1000,
> > - test_us * 2 * 1000 };
> > - unsigned long sleep_busy = busy_us;
> > - unsigned long sleep_idle = idle_us;
> > + const unsigned long timeout[] = {
> > + pwm_calibration_us * 1000, test_us * 2 * 1000
> > + };
> > struct drm_i915_gem_exec_object2 obj = {};
> > + uint64_t busy_ns = 0, idle_ns = 0;
>
> You deliberately moved this one level up? I find it confusing that the
> log message below logs accumulated time from both passes now.
Yes. It continues on from the calibration pass metrics for its baseline.
> > igt_spin_t *spin;
> > int ret;
> >
> > @@ -1478,76 +1481,59 @@ accuracy(int gem_fd, const struct intel_execution_engine2 *e,
> >
> > /* 1st pass is calibration, second pass is the test. */
> > for (int pass = 0; pass < ARRAY_SIZE(timeout); pass++) {
> > - unsigned long busy_ns = 0, idle_ns = 0;
> > struct timespec test_start = { };
> > - unsigned long loops = 0;
> > - double err_busy, err_idle;
> >
> > igt_nsec_elapsed(&test_start);
> > do {
> > struct timespec t_busy = { };
> > + unsigned int target;
>
> target_idle_us ?
Ok.
> >
> > igt_nsec_elapsed(&t_busy);
> >
> > /* Restart the spinbatch. */
> > __rearm_spin_batch(spin);
> > __submit_spin_batch(gem_fd, &obj, e);
> > - measured_usleep(sleep_busy);
> > + measured_usleep(busy_us);
> > igt_spin_batch_end(spin);
> > gem_sync(gem_fd, obj.handle);
> >
> > busy_ns += igt_nsec_elapsed(&t_busy);
> >
> > - idle_ns += measured_usleep(sleep_idle);
> > -
> > - loops++;
> > + target = (100 * busy_ns / target_busy_pct - (busy_ns + idle_ns)) / 1000;
> > + idle_ns += measured_usleep(target);
> > } while (igt_nsec_elapsed(&test_start) < timeout[pass]);
> >
> > - busy_ns = div_round_up(busy_ns, loops);
> > - idle_ns = div_round_up(idle_ns, loops);
> > -
> > - err_busy = __error(busy_ns / 1000, busy_us);
> > - err_idle = __error(idle_ns / 1000, idle_us);
> > -
> > - igt_info("%u: busy %lu/%lu %.2f%%, idle %lu/%lu %.2f%%\n",
> > - pass,
> > - busy_ns / 1000, busy_us, err_busy,
> > - idle_ns / 1000, idle_us, err_idle);
> > -
> > - if (pass == 0) {
> > - sleep_busy = (double)busy_us -
> > - (double)busy_us * err_busy / 100.0;
> > - sleep_idle = (double)idle_us -
> > - (double)idle_us * err_idle / 100.0;
> > - igt_info("calibrated sleeps ratio %.2f%% (%lu/%lu)\n",
> > - (double)sleep_busy /
> > - (sleep_busy + sleep_idle) * 100.0,
> > - sleep_busy, sleep_idle);
> > - }
> > + expected = (double)busy_ns / (busy_ns + idle_ns);
> > + igt_info("%u: busy %luus, idle %luus: %.2f%% (target: %lu%%)\n",
> > + pass, busy_ns / 1000, idle_ns / 1000,
> > + 100 * expected, target_busy_pct);
> > + write(link[1], &expected, sizeof(expected));
> > }
> >
> > igt_spin_batch_free(gem_fd, spin);
> > }
> >
> > /* Let the child run. */
> > - usleep(pwm_calibration_us * 2);
> > + close(link[1]);
> > + read(link[0], &expected, sizeof(expected));
>
> I like this. :)
Can't think who gave me the eureka moment. ;)
> > /* Collect engine busyness for an interesting part of child runtime. */
> > fd = open_pmu(I915_PMU_ENGINE_BUSY(e->class, e->instance));
> > val[0] = __pmu_read_single(fd, &ts[0]);
> > - usleep(test_us / 2);
> > + read(link[0], &expected, sizeof(expected));
> > val[1] = __pmu_read_single(fd, &ts[1]);
> > close(fd);
> > + close(link[0]);
> >
> > igt_waitchildren();
> >
> > busy_r = (double)(val[1] - val[0]) / (ts[1] - ts[0]);
> >
> > - igt_info("error=%.2f%% (%.2f%% vs %lu%%)\n",
> > - __error(busy_r, target_busy_pct / 100.0),
> > - busy_r * 100.0, target_busy_pct);
> > + igt_info("error=%.2f%% (%.2f%% vs %.2f%%)\n",
> > + __error(busy_r, expected), 100 * busy_r, 100 * expected);
> >
> > - assert_within_epsilon(busy_r, (double)target_busy_pct / 100.0, 0.15);
> > + assert_within_epsilon(busy_r, expected, 0.15);
> > + assert_within_epsilon(1 - busy_r, 1 - expected, 0.15);
>
> Hm I don't quite understand how this is increasing fairness since the
> first assert is the same (ignoring self-correcting bit).
Fairness, being equally strict for 2% and 98% targets? I haven't tried
it on paper, just the results seemed to show higher skew for 2%.
> What I was thinking about a few times is to switch to absolute
> tolerance. Just say +/- 2% on the percentage, instead of +/- 15%
> relative to the percentage.
I agree.
> But in general I like these improvements. With a clearer variable name
> and not logging accumulated time between passes:
>
> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
>
> Regards,
>
> Tvrtko
>
> P.S.
> Pity GLK results were not in.
Or the kasan runs... They (ivb in particular fares badly) are next on
the hit list.
-Chris
More information about the igt-dev
mailing list