[igt-dev] [PATCH i-g-t v2] lib/igt_pm: Restore runtime pm state on test exit
Tvrtko Ursulin
tursulin at ursulin.net
Wed Feb 28 15:35:06 UTC 2018
From: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
Some tests (the ones which call igt_setup_runtime_pm and
igt_pm_enable_audio_runtime_pm) change default system configuration and
never restore it.
The configured runtime suspend is aggressive and may influence behaviour
of subsequent tests, so it is better to restore to previous values on test
exit.
This way system behaviour, with regards to a random sequence of executed
tests, will be more consistent from one run to another.
v2: Read failure means no runtime pm support so don't assert on it.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
Cc: Imre Deak <imre.deak at intel.com>
Reviewed-by: Chris Wilson <chris at chris-wilson.co.uk> # v1
---
lib/igt_pm.c | 122 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 117 insertions(+), 5 deletions(-)
diff --git a/lib/igt_pm.c b/lib/igt_pm.c
index 5bf5b2e23cdc..04e2b89cca95 100644
--- a/lib/igt_pm.c
+++ b/lib/igt_pm.c
@@ -63,6 +63,46 @@ enum {
/* Remember to fix this if adding longer strings */
#define MAX_POLICY_STRLEN strlen(MAX_PERFORMANCE_STR)
+static char __igt_pm_audio_runtime_power_save[64];
+static char __igt_pm_audio_runtime_control[64];
+
+static void __igt_pm_audio_runtime_exit_handler(int sig)
+{
+ int fd;
+
+ igt_debug("Restoring audio power management to '%s' and '%s'\n",
+ __igt_pm_audio_runtime_power_save,
+ __igt_pm_audio_runtime_control);
+
+ fd = open("/sys/module/snd_hda_intel/parameters/power_save", O_WRONLY);
+ if (fd < 0)
+ return;
+ if (write(fd, __igt_pm_audio_runtime_power_save,
+ strlen(__igt_pm_audio_runtime_power_save)) !=
+ strlen(__igt_pm_audio_runtime_power_save))
+ igt_warn("Failed to restore audio power_save to '%s'\n",
+ __igt_pm_audio_runtime_power_save);
+ close(fd);
+
+ fd = open("/sys/bus/pci/devices/0000:00:03.0/power/control", O_WRONLY);
+ if (fd < 0)
+ return;
+ if (write(fd, __igt_pm_audio_runtime_control,
+ strlen(__igt_pm_audio_runtime_control)) !=
+ strlen(__igt_pm_audio_runtime_control))
+ igt_warn("Failed to restore audio control to '%s'\n",
+ __igt_pm_audio_runtime_control);
+ close(fd);
+}
+
+static void strchomp(char *str)
+{
+ int len = strlen(str);
+
+ if (len && str[len - 1] == '\n')
+ str[len - 1] = 0;
+}
+
/**
* igt_pm_enable_audio_runtime_pm:
*
@@ -78,16 +118,32 @@ void igt_pm_enable_audio_runtime_pm(void)
{
int fd;
- fd = open("/sys/module/snd_hda_intel/parameters/power_save", O_WRONLY);
+ /* Check if already enabled. */
+ if (__igt_pm_audio_runtime_power_save[0])
+ return;
+
+ fd = open("/sys/module/snd_hda_intel/parameters/power_save", O_RDWR);
if (fd >= 0) {
+ igt_assert(read(fd, __igt_pm_audio_runtime_power_save,
+ sizeof(__igt_pm_audio_runtime_power_save)) > 0);
+ strchomp(__igt_pm_audio_runtime_power_save);
igt_assert_eq(write(fd, "1\n", 2), 2);
+ igt_install_exit_handler(__igt_pm_audio_runtime_exit_handler);
close(fd);
}
- fd = open("/sys/bus/pci/devices/0000:00:03.0/power/control", O_WRONLY);
+ fd = open("/sys/bus/pci/devices/0000:00:03.0/power/control", O_RDWR);
if (fd >= 0) {
+ igt_assert(read(fd, __igt_pm_audio_runtime_control,
+ sizeof(__igt_pm_audio_runtime_control)) > 0);
+ strchomp(__igt_pm_audio_runtime_control);
igt_assert_eq(write(fd, "auto\n", 5), 5);
close(fd);
}
+
+ igt_debug("Saved audio power management as '%s' and '%s'\n",
+ __igt_pm_audio_runtime_power_save,
+ __igt_pm_audio_runtime_control);
+
/* Give some time for it to react. */
sleep(1);
}
@@ -238,6 +294,38 @@ void igt_pm_restore_sata_link_power_management(int8_t *pm_data)
/* We just leak this on exit ... */
int pm_status_fd = -1;
+static char __igt_pm_runtime_autosuspend[64];
+static char __igt_pm_runtime_control[64];
+
+static void __igt_pm_runtime_exit_handler(int sig)
+{
+ int fd;
+
+ igt_debug("Restoring runtime management to '%s' and '%s'\n",
+ __igt_pm_runtime_autosuspend,
+ __igt_pm_runtime_control);
+
+ fd = open(POWER_DIR "/autosuspend_delay_ms", O_WRONLY);
+ if (fd < 0)
+ return;
+ if (write(fd, __igt_pm_runtime_autosuspend,
+ strlen(__igt_pm_runtime_autosuspend)) !=
+ strlen(__igt_pm_runtime_autosuspend))
+ igt_warn("Failed to restore runtime pm autosuspend delay to '%s'\n",
+ __igt_pm_runtime_autosuspend);
+ close(fd);
+
+ fd = open(POWER_DIR "/control", O_WRONLY);
+ if (fd < 0)
+ return;
+ if (write(fd, __igt_pm_runtime_control,
+ strlen(__igt_pm_runtime_control)) !=
+ strlen(__igt_pm_runtime_control))
+ igt_warn("Failed to restore runtime pm control to '%s'\n",
+ __igt_pm_runtime_control);
+ close(fd);
+}
+
/**
* igt_setup_runtime_pm:
*
@@ -261,12 +349,26 @@ bool igt_setup_runtime_pm(void)
/* Our implementation uses autosuspend. Try to set it to 0ms so the test
* suite goes faster and we have a higher probability of triggering race
* conditions. */
- fd = open(POWER_DIR "/autosuspend_delay_ms", O_WRONLY);
+ fd = open(POWER_DIR "/autosuspend_delay_ms", O_RDWR);
igt_assert_f(fd >= 0,
"Can't open " POWER_DIR "/autosuspend_delay_ms\n");
- /* If we fail to write to the file, it means this system doesn't support
- * runtime PM. */
+ /*
+ * Save previous values to be able to install exit handler to restore
+ * them on test exit.
+ */
+ size = read(fd, __igt_pm_runtime_autosuspend,
+ sizeof(__igt_pm_runtime_autosuspend));
+
+ /*
+ * If we fail to read from the file, it means this system doesn't
+ * support runtime PM.
+ */
+ if (size <= 0) {
+ close(fd);
+ return false;
+ }
+
size = write(fd, "0\n", 2);
close(fd);
@@ -274,10 +376,20 @@ bool igt_setup_runtime_pm(void)
if (size != 2)
return false;
+ strchomp(__igt_pm_runtime_autosuspend);
+ igt_install_exit_handler(__igt_pm_runtime_exit_handler);
+
/* We know we support runtime PM, let's try to enable it now. */
fd = open(POWER_DIR "/control", O_RDWR);
igt_assert_f(fd >= 0, "Can't open " POWER_DIR "/control\n");
+ igt_assert(read(fd, __igt_pm_runtime_control,
+ sizeof(__igt_pm_runtime_control)) > 0);
+ strchomp(__igt_pm_runtime_control);
+
+ igt_debug("Saved runtime power management as '%s' and '%s'\n",
+ __igt_pm_runtime_autosuspend, __igt_pm_runtime_control);
+
size = write(fd, "auto\n", 5);
igt_assert(size == 5);
--
2.14.1
More information about the igt-dev
mailing list