[igt-dev] [PATCH igt-dev v14] tests/kms_frontbuffer_tracking: Including DRRS test coverage

Rodrigo Vivi rodrigo.vivi at intel.com
Tue Jan 30 18:02:12 UTC 2018


On Tue, Jan 30, 2018 at 05:57:37PM +0000, Rodrigo Vivi wrote:
> On Tue, Jan 30, 2018 at 01:50:11PM +0000, Lohith BS wrote:
> > Dynamic Refresh Rate Switch(DRRS) is used to switch the panel's
> > refresh rate to the lowest vrefresh supported by panel, when frame is
> > not flipped for more than a Sec.
> > 
> > In kernel, DRRS uses the front buffer tracking infrastructure.
> > Hence DRRS test coverage is added along with other frontbuffer tracking
> > based features such as FBC and PSR tests.
> > 
> > Here, we are testing DRRS with other features in all possible
> > combinations, in all required test cases, to capture any possible
> > regression.
> > 
> > v2: Addressed the comments and suggestions from Vlad, Marius.
> >     The signoff details from the earlier work are also included.
> > 
> > v3: Modified vblank rate calculation by using reply-sequence,
> >     provided by drmWaitVBlank, as suggested by Chris Wilson.
> > 
> > v4: As suggested from Chris Wilson and Daniel Vetter
> >     1) Avoided using pthread for calculating vblank refresh rate,
> >        instead used drmWaitVBlank reply sequence.
> >     2) Avoided using kernel-specific info like transitional delays,
> >        instead polling mechanism with timeout is used.
> >     3) Included edp-DRRS as a subtest in kms_frontbuffer_tracking.c,
> >        instead of having a separate test.
> > 
> > v5: This patch adds DRRS as a new feature in the
> >     kms_frontbuffer_tracking IGT.
> >     DRRS switch to lower vrefresh rate is tested at slow-draw subtest.
> > 
> >     Note:
> >     1) Currently kernel doesn't have support to enable and disable
> >        the DRRS feature dynamically(as in case of PSR). Hence if the
> >        panel supports DRRS it will be enabled by default.
> > 
> >     This is in continuation of last patch
> > 	"https://patchwork.freedesktop.org/patch/162726/"
> > 
> > v6: This patch adds runtime enable and disable feature for testing DRRS
> > 
> > v7: This patch adds runtime enable and disable feature for testing DRRS
> >     through debugfs entry "i915_drrs_ctl".
> > 
> > v8: Commit message is updated to reflect current implementation.
> > 
> > v9: Addressed Paulo Zanoni comments.
> >     Check for DRRS_LOW at tests with OFFSCREEN + FBS_INDIVIDUAL.
> > 
> > v10: Corrected DRRS state expectation in suspend related subtests.
> > 
> > v11: Removing the global flag is_psr_drrs_combo [Rodrigo].
> > 
> > v12: Rewriting the DRRS inactive deduction [Rodrigo].
> > 
> > v13: En/Dis-able DRRS only when DRRS is capable on the setup.
> > 
> > v14: Handle the error states of drrs_enable only [Rodrigo].
> > 
> > Signed-off-by: Lohith BS <lohith.bs at intel.com>
> > Signed-off-by: aknautiy <ankit.k.nautiyal at intel.com>
> > ---
> >  tests/kms_frontbuffer_tracking.c | 177 +++++++++++++++++++++++++++++++++++++--
> >  1 file changed, 169 insertions(+), 8 deletions(-)
> > 
> > diff --git a/tests/kms_frontbuffer_tracking.c b/tests/kms_frontbuffer_tracking.c
> > index 1601cab..046f16a 100644
> > --- a/tests/kms_frontbuffer_tracking.c
> > +++ b/tests/kms_frontbuffer_tracking.c
> > @@ -34,7 +34,7 @@
> >  
> >  
> >  IGT_TEST_DESCRIPTION("Test the Kernel's frontbuffer tracking mechanism and "
> > -		     "its related features: FBC and PSR");
> > +		     "its related features: FBC, PSR and DRRS");
> >  
> >  /*
> >   * One of the aspects of this test is that, for every subtest, we try different
> > @@ -105,8 +105,9 @@ struct test_mode {
> >  		FEATURE_NONE  = 0,
> >  		FEATURE_FBC   = 1,
> >  		FEATURE_PSR   = 2,
> > -		FEATURE_COUNT = 4,
> > -		FEATURE_DEFAULT = 4,
> > +		FEATURE_DRRS  = 4,
> > +		FEATURE_COUNT = 8,
> > +		FEATURE_DEFAULT = 8,
> >  	} feature;
> >  
> >  	/* Possible pixel formats. We just use FORMAT_DEFAULT for most tests and
> > @@ -182,6 +183,13 @@ struct {
> >  	.can_test = false,
> >  };
> >  
> > +#define MAX_DRRS_STATUS_BUF_LEN 256
> > +
> > +struct {
> > +	bool can_test;
> > +} drrs = {
> > +	.can_test = false,
> > +};
> >  
> >  #define SINK_CRC_SIZE 12
> >  typedef struct {
> > @@ -790,7 +798,13 @@ static void __debugfs_read(const char *param, char *buf, int len)
> >  	buf[len] = '\0';
> >  }
> >  
> > +static int __debugfs_write(const char *param, char *buf, int len)
> > +{
> > +	return igt_sysfs_write(drm.debugfs, param, buf, len - 1);
> > +}
> > +
> >  #define debugfs_read(p, arr) __debugfs_read(p, arr, sizeof(arr))
> > +#define debugfs_write(p, arr) __debugfs_write(p, arr, sizeof(arr))
> >  
> >  static bool fbc_is_enabled(void)
> >  {
> > @@ -825,6 +839,68 @@ static void psr_print_status(void)
> >  	igt_info("PSR status:\n%s\n", buf);
> >  }
> >  
> > +void drrs_set(unsigned int val)
> > +{
> > +	char buf[2];
> > +	int ret;
> > +
> > +	igt_debug("Manually %sabling DRRS. %llu\n", val ? "en" : "dis", val);
> > +	snprintf(buf, sizeof(buf), "%d", val);
> > +	ret = debugfs_write("i915_drrs_ctl", buf);
> > +
> > +	/*
> > +	 * drrs_enable() is called on DRRS capable platform only,
> > +	 * whereas drrs_disable() is called on all platforms.
> > +	 * So handle the failure of debugfs_write only for drrs_enable().
> > +	 */
> > +	if (val)
> > +		igt_assert_f(ret == (sizeof(buf) - 1), "debugfs_write failed");
> 
> I'd prefer the assert_neq(ret, -ENODEV) and in a way that we could kill the can_test
> but I also cannot see that easy way on the current structure so it looks good for now
> 
> Reviewed-by: Rodrigo Vivi <rodrigo.vivi at intel.com>

I take it back..
it doesn't apply cleanly to igt master branch and after fixing conflicts meson build doesn't like it.

Please make sure it applies and run properly on top of igt master branch and build cleanly with meson build.

$ ./meson.sh 
ninja -C build
ninja: Entering directory `build'
[2/22] Compiling C object 'tests/kms_frontbuffer_tracking at exe/kms_frontbuffer_tracking.c.o'.
In file included from ../lib/intel_batchbuffer.h:8:0,
                 from ../lib/drmtest.h:39,
                 from ../lib/igt.h:27,
                 from ../tests/kms_frontbuffer_tracking.c:27:
../tests/kms_frontbuffer_tracking.c: In function ‘drrs_set’:
../tests/kms_frontbuffer_tracking.c:840:12: warning: format ‘%llu’ expects argument of type ‘long long unsigned int’, but argument 5 has type ‘unsigned int’ [-Wformat=]
  igt_debug("Manually %sabling DRRS. %llu\n", val ? "en" : "dis", val);
            ^
../lib/igt_core.h:795:64: note: in definition of macro ‘igt_debug’
 #define igt_debug(f...) igt_log(IGT_LOG_DOMAIN, IGT_LOG_DEBUG, f)
                                                                ^
[22/22] Generating igt_test_programs_gem_description.xml with a custom command.

> 
> I'm going to merge now...
> > +}
> > +
> > +static bool is_drrs_high(void)
> > +{
> > +	char buf[MAX_DRRS_STATUS_BUF_LEN];
> > +
> > +	debugfs_read("i915_drrs_status", buf);
> > +	return strstr(buf, "DRRS_HIGH_RR");
> > +}
> > +
> > +static bool is_drrs_low(void)
> > +{
> > +	char buf[MAX_DRRS_STATUS_BUF_LEN];
> > +
> > +	debugfs_read("i915_drrs_status", buf);
> > +	return strstr(buf, "DRRS_LOW_RR");
> > +}
> > +
> > +static bool is_drrs_supported(void)
> > +{
> > +	char buf[MAX_DRRS_STATUS_BUF_LEN];
> > +
> > +	debugfs_read("i915_drrs_status", buf);
> > +	return strstr(buf, "DRRS Supported: Yes");
> > +}
> > +
> > +static bool is_drrs_inactive(void)
> > +{
> > +	char buf[MAX_DRRS_STATUS_BUF_LEN];
> > +
> > +	debugfs_read("i915_drrs_status", buf);
> > +
> > +	if (strstr(buf, "DRRS_State: "))
> > +		return false;
> > +
> > +	return true;
> > +}
> > +
> > +static void drrs_print_status(void)
> > +{
> > +	char buf[MAX_DRRS_STATUS_BUF_LEN];
> > +
> > +	debugfs_read("i915_drrs_status", buf);
> > +	igt_info("DRRS STATUS :\n%s\n", buf);
> > +}
> > +
> >  static struct timespec fbc_get_last_action(void)
> >  {
> >  	struct timespec ret = { 0, 0 };
> > @@ -935,10 +1011,17 @@ static bool psr_wait_until_enabled(void)
> >  	return igt_wait(psr_is_enabled(), 5000, 1);
> >  }
> >  
> > +static bool drrs_wait_until_rr_switch_to_low(void)
> > +{
> > +	return igt_wait(is_drrs_low(), 5000, 1);
> > +}
> > +
> >  #define fbc_enable() igt_set_module_param_int("enable_fbc", 1)
> >  #define fbc_disable() igt_set_module_param_int("enable_fbc", 0)
> >  #define psr_enable() igt_set_module_param_int("enable_psr", 1)
> >  #define psr_disable() igt_set_module_param_int("enable_psr", 0)
> > +#define drrs_enable()	drrs_set(1)
> > +#define drrs_disable()	drrs_set(0)
> >  
> >  static void get_sink_crc(sink_crc_t *crc, bool mandatory)
> >  {
> > @@ -1184,6 +1267,7 @@ static void disable_features(const struct test_mode *t)
> >  
> >  	fbc_disable();
> >  	psr_disable();
> > +	drrs_disable();
> >  }
> >  
> >  static void *busy_thread_func(void *data)
> > @@ -1577,6 +1661,22 @@ static void teardown_psr(void)
> >  {
> >  }
> >  
> > +static void setup_drrs(void)
> > +{
> > +	if (get_connector(prim_mode_params.connector_id)->connector_type !=
> > +	    DRM_MODE_CONNECTOR_eDP) {
> > +		igt_info("Can't test DRRS: no usable eDP screen.\n");
> > +		return;
> > +	}
> > +
> > +	if (!is_drrs_supported()) {
> > +		igt_info("Can't test DRRS: Not supported.\n");
> > +		return;
> > +	}
> > +
> > +	drrs.can_test = true;
> > +}
> > +
> >  static void setup_environment(void)
> >  {
> >  	setup_drm();
> > @@ -1584,6 +1684,7 @@ static void setup_environment(void)
> >  
> >  	setup_fbc();
> >  	setup_psr();
> > +	setup_drrs();
> >  
> >  	setup_crcs();
> >  }
> > @@ -1662,6 +1763,11 @@ static void do_flush(const struct test_mode *t)
> >  #define ASSERT_PSR_ENABLED		(1 << 6)
> >  #define ASSERT_PSR_DISABLED		(1 << 7)
> >  
> > +#define DRRS_ASSERT_FLAGS		(7 << 8)
> > +#define ASSERT_DRRS_HIGH		(1 << 8)
> > +#define ASSERT_DRRS_LOW		(1 << 9)
> > +#define ASSERT_DRRS_INACTIVE		(1 << 10)
> > +
> >  static int adjust_assertion_flags(const struct test_mode *t, int flags)
> >  {
> >  	if (!(flags & DONT_ASSERT_FEATURE_STATUS)) {
> > @@ -1669,12 +1775,17 @@ static int adjust_assertion_flags(const struct test_mode *t, int flags)
> >  			flags |= ASSERT_FBC_ENABLED;
> >  		if (!(flags & ASSERT_PSR_DISABLED))
> >  			flags |= ASSERT_PSR_ENABLED;
> > +		if (!((flags & ASSERT_DRRS_LOW) ||
> > +		    (flags & ASSERT_DRRS_INACTIVE)))
> > +			flags |= ASSERT_DRRS_HIGH;
> >  	}
> >  
> >  	if ((t->feature & FEATURE_FBC) == 0)
> >  		flags &= ~FBC_ASSERT_FLAGS;
> >  	if ((t->feature & FEATURE_PSR) == 0)
> >  		flags &= ~PSR_ASSERT_FLAGS;
> > +	if ((t->feature & FEATURE_DRRS) == 0)
> > +		flags &= ~DRRS_ASSERT_FLAGS;
> >  
> >  	return flags;
> >  }
> > @@ -1706,6 +1817,23 @@ static void do_status_assertions(int flags)
> >  		return;
> >  	}
> >  
> > +	if (flags & ASSERT_DRRS_HIGH) {
> > +		if (!is_drrs_high()) {
> > +			drrs_print_status();
> > +			igt_assert_f(false, "DRRS HIGH\n");
> > +		}
> > +	} else if (flags & ASSERT_DRRS_LOW) {
> > +		if (!drrs_wait_until_rr_switch_to_low()) {
> > +			drrs_print_status();
> > +			igt_assert_f(false, "DRRS LOW\n");
> > +		}
> > +	} else if (flags & ASSERT_DRRS_INACTIVE) {
> > +		if (!is_drrs_inactive()) {
> > +			drrs_print_status();
> > +			igt_assert_f(false, "DRRS INACTIVE\n");
> > +		}
> > +	}
> > +
> >  	if (flags & ASSERT_FBC_ENABLED) {
> >  		igt_require(!fbc_not_enough_stolen());
> >  		igt_require(!fbc_stride_not_supported());
> > @@ -1833,6 +1961,8 @@ static void enable_features_for_test(const struct test_mode *t)
> >  		fbc_enable();
> >  	if (t->feature & FEATURE_PSR)
> >  		psr_enable();
> > +	if (t->feature & FEATURE_DRRS)
> > +		drrs_enable();
> >  }
> >  
> >  static void check_test_requirements(const struct test_mode *t)
> > @@ -1852,6 +1982,18 @@ static void check_test_requirements(const struct test_mode *t)
> >  			      "Can't test PSR without sink CRCs\n");
> >  	}
> >  
> > +	if (t->feature & FEATURE_DRRS)
> > +		igt_require_f(drrs.can_test,
> > +			      "Can't test DRRS with the current outputs\n");
> > +
> > +	/*
> > +	 * In kernel, When PSR is enabled, DRRS will be disabled. So If a test
> > +	 * case needs DRRS + PSR enabled, that will be skipped.
> > +	 */
> > +	igt_require_f(!((t->feature & FEATURE_PSR) &&
> > +		      (t->feature & FEATURE_DRRS)),
> > +		      "Can't test PSR and DRRS together\n");
> > +
> >  	if (opt.only_pipes != PIPE_COUNT)
> >  		igt_require(t->pipes == opt.only_pipes);
> >  }
> > @@ -1973,7 +2115,7 @@ static void rte_subtest(const struct test_mode *t)
> >  
> >  	unset_all_crtcs();
> >  	do_assertions(ASSERT_FBC_DISABLED | ASSERT_PSR_DISABLED |
> > -		      DONT_ASSERT_CRC);
> > +		      DONT_ASSERT_CRC | ASSERT_DRRS_INACTIVE);
> >  
> >  	enable_prim_screen_and_wait(t);
> >  	set_cursor_for_test(t, &prim_mode_params);
> > @@ -2065,6 +2207,13 @@ static void draw_subtest(const struct test_mode *t)
> >  	if (op_disables_psr(t, t->method))
> >  		assertions |= ASSERT_PSR_DISABLED;
> >  
> > +	/*
> > +	 * On FBS_INDIVIDUAL, write to offscreen plane will not touch the
> > +	 * current frambuffer. Hence assert for DRRS_LOW.
> > +	 */
> > +	if ((t->fbs == FBS_INDIVIDUAL) && (t->screen == SCREEN_OFFSCREEN))
> > +		assertions |= ASSERT_DRRS_LOW;
> > +
> >  	prepare_subtest(t, pattern);
> >  	target = pick_target(t, params);
> >  
> > @@ -2273,7 +2422,11 @@ static void slow_draw_subtest(const struct test_mode *t)
> >  		sleep(2);
> >  
> >  		update_wanted_crc(t, &pattern->crcs[t->format][r]);
> > -		do_assertions(0);
> > +
> > +		if (t->feature & FEATURE_DRRS)
> > +			do_assertions(ASSERT_DRRS_LOW);
> > +		else
> > +			do_assertions(0);
> >  	}
> >  }
> >  
> > @@ -2882,14 +3035,14 @@ static void suspend_subtest(const struct test_mode *t)
> >  	sleep(5);
> >  	igt_system_suspend_autoresume(SUSPEND_STATE_MEM, SUSPEND_TEST_NONE);
> >  	sleep(5);
> > -	do_assertions(0);
> > +	do_assertions(ASSERT_DRRS_LOW);
> >  
> >  	unset_all_crtcs();
> >  	sleep(5);
> >  	igt_system_suspend_autoresume(SUSPEND_STATE_MEM, SUSPEND_TEST_NONE);
> >  	sleep(5);
> >  	do_assertions(ASSERT_FBC_DISABLED | ASSERT_PSR_DISABLED |
> > -		      DONT_ASSERT_CRC);
> > +		      DONT_ASSERT_CRC | ASSERT_DRRS_INACTIVE);
> >  
> >  	set_mode_for_params(params);
> >  	do_assertions(0);
> > @@ -3371,6 +3524,14 @@ static const char *feature_str(int feature)
> >  		return "psr";
> >  	case FEATURE_FBC | FEATURE_PSR:
> >  		return "fbcpsr";
> > +	case FEATURE_DRRS:
> > +		return "drrs";
> > +	case FEATURE_FBC | FEATURE_DRRS:
> > +		return "fbcdrrs";
> > +	case FEATURE_PSR | FEATURE_DRRS:
> > +		return "psrdrrs";
> > +	case FEATURE_FBC | FEATURE_PSR | FEATURE_DRRS:
> > +		return "fbcpsrdrrs";
> >  	default:
> >  		igt_assert(false);
> >  	}
> > @@ -3635,7 +3796,7 @@ int main(int argc, char *argv[])
> >  				tilingchange_subtest(&t);
> >  		}
> >  
> > -		if (t.feature & FEATURE_PSR)
> > +		if ((t.feature & FEATURE_PSR) || (t.feature & FEATURE_DRRS))
> >  			igt_subtest_f("%s-slowdraw", feature_str(t.feature))
> >  				slow_draw_subtest(&t);
> >  
> > -- 
> > 1.9.1
> > 


More information about the igt-dev mailing list