[igt-dev] [CI 1/5] tests/frontbuffer_tracking: Do not test sink crc
Dhinakaran Pandiyan
dhinakaran.pandiyan at intel.com
Thu Jul 12 18:44:27 UTC 2018
eDP sink crc reads use vblank interrupts that cause PSR exit and
therefore makes them unsuitable for PSR testing. Besides that, reading
sink CRC via the AUX channel for testing when the HW also is most likely
is going to be using AUX channel is a recipe for inconsistent test
results. Thirdly, CRC's have been seen to be noisy or vary across sinks for
the same driver and test code. We tradeoff the ability to validate what the
sink is displaying for correctness.
Cc: Daniel Vetter <daniel at ffwll.ch>
Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
---
tests/kms_frontbuffer_tracking.c | 143 ++++++---------------------------------
1 file changed, 21 insertions(+), 122 deletions(-)
diff --git a/tests/kms_frontbuffer_tracking.c b/tests/kms_frontbuffer_tracking.c
index dbb8ba62..116a95bc 100644
--- a/tests/kms_frontbuffer_tracking.c
+++ b/tests/kms_frontbuffer_tracking.c
@@ -184,32 +184,12 @@ struct {
.can_test = false,
};
-#define SINK_CRC_SIZE 12
-typedef struct {
- char data[SINK_CRC_SIZE];
-} sink_crc_t;
-
-struct both_crcs {
- igt_crc_t pipe;
- sink_crc_t sink;
-};
-
igt_pipe_crc_t *pipe_crc;
+igt_crc_t *wanted_crc;
struct {
bool initialized;
- struct both_crcs crc;
+ igt_crc_t crc;
} blue_crcs[FORMAT_COUNT];
-struct both_crcs *wanted_crc;
-
-struct {
- int fd;
- bool supported;
- bool reliable;
-} sink_crc = {
- .fd = -1,
- .supported = true,
- .reliable = true,
-};
/* The goal of this structure is to easily allow us to deal with cases where we
* have a big framebuffer and the CRTC is just displaying a subregion of this
@@ -229,7 +209,7 @@ struct draw_pattern_info {
struct rect (*get_rect)(struct fb_region *fb, int r);
bool initialized[FORMAT_COUNT];
- struct both_crcs *crcs[FORMAT_COUNT];
+ igt_crc_t *crcs[FORMAT_COUNT];
};
/* Draw big rectangles on the screen. */
@@ -991,44 +971,6 @@ static bool drrs_wait_until_rr_switch_to_low(void)
#define drrs_enable() drrs_set(1)
#define drrs_disable() drrs_set(0)
-static void get_sink_crc(sink_crc_t *crc, bool mandatory)
-{
- int rc, errno_;
-
- if (!sink_crc.supported) {
- memcpy(crc, "unsupported!", SINK_CRC_SIZE);
- return;
- }
-
- lseek(sink_crc.fd, 0, SEEK_SET);
-
- rc = read(sink_crc.fd, crc->data, SINK_CRC_SIZE);
- errno_ = errno;
-
- if (rc == -1 && errno_ == ENOTTY) {
- igt_info("Sink CRC not supported: panel doesn't support it\n");
- sink_crc.supported = false;
- } else if (rc == -1 && errno_ == ETIMEDOUT) {
- if (sink_crc.reliable) {
- igt_info("Sink CRC is unreliable on this machine.\n");
- sink_crc.reliable = false;
- }
-
- if (mandatory)
- igt_skip("Sink CRC is unreliable on this machine.\n");
- } else {
- igt_assert_f(rc != -1, "Unexpected error: %d\n", errno_);
- igt_assert(rc == SINK_CRC_SIZE);
- }
-}
-
-static bool sink_crc_equal(sink_crc_t *a, sink_crc_t *b)
-{
- return (memcmp(a->data, b->data, SINK_CRC_SIZE) == 0);
-}
-
-#define assert_sink_crc_equal(a, b) igt_assert(sink_crc_equal(a, b))
-
static struct rect pat1_get_rect(struct fb_region *fb, int r)
{
struct rect rect;
@@ -1262,30 +1204,23 @@ static void stop_busy_thread(void)
}
}
-static void print_crc(const char *str, struct both_crcs *crc)
+static void print_crc(const char *str, igt_crc_t *crc)
{
- int i;
char *pipe_str;
- pipe_str = igt_crc_to_string(&crc->pipe);
+ pipe_str = igt_crc_to_string(crc);
- igt_debug("%s pipe:[%s] sink:[", str, pipe_str);
- for (i = 0; i < SINK_CRC_SIZE; i++)
- igt_debug("%c", crc->sink.data[i]);
- igt_debug("]\n");
+ igt_debug("%s pipe:[%s]\n", str, pipe_str);
free(pipe_str);
}
-static void collect_crcs(struct both_crcs *crcs, bool mandatory_sink_crc)
+static void collect_crc(igt_crc_t *crc)
{
- igt_pipe_crc_collect_crc(pipe_crc, &crcs->pipe);
- get_sink_crc(&crcs->sink, mandatory_sink_crc);
+ igt_pipe_crc_collect_crc(pipe_crc, crc);
}
-static void setup_sink_crc(void);
-
-static void init_blue_crc(enum pixel_format format, bool mandatory_sink_crc)
+static void init_blue_crc(enum pixel_format format)
{
struct igt_fb blue;
@@ -1306,11 +1241,9 @@ static void init_blue_crc(enum pixel_format format, bool mandatory_sink_crc)
if (!pipe_crc) {
pipe_crc = igt_pipe_crc_new(drm.fd, prim_mode_params.pipe, INTEL_PIPE_CRC_SOURCE_AUTO);
igt_assert(pipe_crc);
-
- setup_sink_crc();
}
- collect_crcs(&blue_crcs[format].crc, mandatory_sink_crc);
+ collect_crc(&blue_crcs[format].crc);
print_crc("Blue CRC: ", &blue_crcs[format].crc);
@@ -1322,8 +1255,7 @@ static void init_blue_crc(enum pixel_format format, bool mandatory_sink_crc)
}
static void init_crcs(enum pixel_format format,
- struct draw_pattern_info *pattern,
- bool mandatory_sink_crc)
+ struct draw_pattern_info *pattern)
{
int r, r_;
struct igt_fb tmp_fbs[pattern->n_rects];
@@ -1359,7 +1291,7 @@ static void init_crcs(enum pixel_format format,
igt_plane_set_fb(prim_mode_params.primary.plane, &tmp_fbs[r]);
igt_display_commit(&drm.display);
- collect_crcs(&pattern->crcs[format][r], mandatory_sink_crc);
+ collect_crc(&pattern->crcs[format][r]);
}
for (r = 0; r < pattern->n_rects; r++) {
@@ -1412,25 +1344,6 @@ static void teardown_modeset(void)
destroy_fbs(f);
}
-static void setup_sink_crc(void)
-{
- sink_crc_t crc;
- drmModeConnectorPtr c;
-
- c = prim_mode_params.output->config.connector;
- if (c->connector_type != DRM_MODE_CONNECTOR_eDP) {
- igt_info("Sink CRC not supported: primary screen is not eDP\n");
- sink_crc.supported = false;
- return;
- }
-
- sink_crc.fd = openat(drm.debugfs, "i915_sink_crc_eDP1", O_RDONLY);
- igt_assert_lte(0, sink_crc.fd);
-
- /* Do a first read to try to detect if it's supported. */
- get_sink_crc(&crc, false);
-}
-
static void setup_crcs(void)
{
enum pixel_format f;
@@ -1486,9 +1399,6 @@ static void teardown_crcs(void)
free(pattern4.crcs[f]);
}
- if (sink_crc.fd != -1)
- close(sink_crc.fd);
-
igt_pipe_crc_free(pipe_crc);
}
@@ -1695,23 +1605,18 @@ static int adjust_assertion_flags(const struct test_mode *t, int flags)
return flags;
}
-static void do_crc_assertions(int flags, bool mandatory_sink_crc)
+static void do_crc_assertions(int flags)
{
- struct both_crcs crc;
+ igt_crc_t crc;
if (!opt.check_crc || (flags & DONT_ASSERT_CRC))
return;
- collect_crcs(&crc, mandatory_sink_crc);
+ collect_crc(&crc);
print_crc("Calculated CRC:", &crc);
igt_assert(wanted_crc);
- igt_assert_crc_equal(&crc.pipe, &wanted_crc->pipe);
- if (mandatory_sink_crc)
- assert_sink_crc_equal(&crc.sink, &wanted_crc->sink);
- else if (sink_crc.reliable &&
- !sink_crc_equal(&crc.sink, &wanted_crc->sink))
- igt_info("Sink CRC differ, but not required\n");
+ igt_assert_crc_equal(&crc, wanted_crc);
}
static void do_status_assertions(int flags)
@@ -1770,7 +1675,6 @@ static void do_status_assertions(int flags)
static void __do_assertions(const struct test_mode *t, int flags,
int line)
{
- bool mandatory_sink_crc = t->feature & FEATURE_PSR;
flags = adjust_assertion_flags(t, flags);
igt_debug("checking asserts in line %i\n", line);
@@ -1779,7 +1683,7 @@ static void __do_assertions(const struct test_mode *t, int flags,
/* Check the CRC to make sure the drawing operations work
* immediately, independently of the features being enabled. */
- do_crc_assertions(flags, mandatory_sink_crc);
+ do_crc_assertions(flags);
/* Now we can flush things to make the test faster. */
do_flush(t);
@@ -1792,7 +1696,7 @@ static void __do_assertions(const struct test_mode *t, int flags,
* would only delay the test suite while adding no value to the
* test suite. */
if (t->screen == SCREEN_PRIM)
- do_crc_assertions(flags, mandatory_sink_crc);
+ do_crc_assertions(flags);
if (fbc.supports_last_action && opt.fbc_check_last_action) {
if (flags & ASSERT_LAST_ACTION_CHANGED)
@@ -1865,8 +1769,6 @@ static void check_test_requirements(const struct test_mode *t)
if (t->feature & FEATURE_PSR) {
igt_require_f(psr.can_test,
"Can't test PSR with the current outputs\n");
- igt_require_f(sink_crc.supported,
- "Can't test PSR without sink CRCs\n");
}
if (t->feature & FEATURE_DRRS)
@@ -1945,9 +1847,9 @@ static void prepare_subtest_data(const struct test_mode *t,
unset_all_crtcs();
- init_blue_crc(t->format, t->feature & FEATURE_PSR);
+ init_blue_crc(t->format);
if (pattern)
- init_crcs(t->format, pattern, t->feature & FEATURE_PSR);
+ init_crcs(t->format, pattern);
enable_features_for_test(t);
}
@@ -2016,7 +1918,7 @@ static void rte_subtest(const struct test_mode *t)
set_region_for_test(t, &scnd_mode_params.sprite);
}
-static void update_wanted_crc(const struct test_mode *t, struct both_crcs *crc)
+static void update_wanted_crc(const struct test_mode *t, igt_crc_t *crc)
{
if (t->screen == SCREEN_PRIM)
wanted_crc = crc;
@@ -3140,9 +3042,6 @@ static void tilingchange_subtest(const struct test_mode *t)
* If you get a failure here, you should run the more specific draw and flip
* subtests of each feature in order to discover what exactly is failing and
* why.
- *
- * TODO: do sink CRC assertions in case sink_crc.supported. Only do this after
- * our sink CRC code gets 100% reliable, in order to avoid CI false negatives.
*/
static void basic_subtest(const struct test_mode *t)
{
--
2.14.1
More information about the igt-dev
mailing list