[igt-dev] [PATCH i-g-t 22/25] lib/rendercopy: Add support for Yf/Ys tiling to gen9 rendercopy

[Ville Syrjala]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

Set up the surface state accordingly to support Yf/Ys tiling.

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 lib/gen8_render.h     | 6 ++++--
 lib/rendercopy_gen9.c | 8 +++++++-
 2 files changed, 11 insertions(+), 3 deletions(-)

diff --git a/lib/gen8_render.h b/lib/gen8_render.h
index c62047d86b25..372c52679861 100644
--- a/lib/gen8_render.h
+++ b/lib/gen8_render.h
@@ -121,9 +121,11 @@ struct gen8_surface_state
 	struct {
 		uint32_t mip_count:4;
 		uint32_t min_lod:4;
-		uint32_t pad3:6;
+		uint32_t mip_tail_start_lod:4; /* gen9+ */
+		uint32_t pad3:2;
 		uint32_t coherency_type:1;
-		uint32_t pad2:5;
+		uint32_t pad2:3;
+		uint32_t trmode:2; /* gen9+ */
 		uint32_t ewa_disable_for_cube:1;
 		uint32_t y_offset:3;
 		uint32_t pad0:1;
diff --git a/lib/rendercopy_gen9.c b/lib/rendercopy_gen9.c
index 0ed897768008..31710ecdd72e 100644
--- a/lib/rendercopy_gen9.c
+++ b/lib/rendercopy_gen9.c
@@ -168,9 +168,15 @@ gen8_bind_buf(struct intel_batchbuffer *batch, const struct igt_buf *buf,
 	ss->ss0.horizontal_alignment = 1; /* align 4 */
 	if (buf->tiling == I915_TILING_X)
 		ss->ss0.tiled_mode = 2;
-	else if (buf->tiling == I915_TILING_Y)
+	else if (buf->tiling != I915_TILING_NONE)
 		ss->ss0.tiled_mode = 3;
 
+	if (buf->tiling == I915_TILING_Yf)
+		ss->ss5.trmode = 1;
+	else if (buf->tiling == I915_TILING_Ys)
+		ss->ss5.trmode = 2;
+	ss->ss5.mip_tail_start_lod = 1; /* needed with trmode */
+
 	ss->ss8.base_addr = buf->bo->offset64;
 	ss->ss9.base_addr_hi = buf->bo->offset64 >> 32;
 
-- 
2.16.4