[igt-dev] [PATCH] docs/chamelium: Update sections of a network and a config file in detail

[Martin Peres]

Reviewed-by: Martin Peres <martin.peres at linux.intel.com>

On 24/07/18 15:44, Gwan-gyeong Mun wrote:
> It updates a network setting between a Target PC and a Chamelium.
> And it adds informations of Chamelium-specific keys for DRM connector and
> Chamelium Port ID in detail.
> And it adds "Running the Chamelium With IGT" section.
> 
> v2:
>  Martin Peres
>  * Change FrameDumpPath to /root/ from /tmp/ on IGT configuration.
>  * Add physical locations of DP1 and DP2 ports on Chamelium Board.
> 
> Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun at intel.com>
> ---
>  docs/chamelium.txt | 45 ++++++++++++++++++++++++++++++++++++++++-----
>  1 file changed, 40 insertions(+), 5 deletions(-)
> 
> diff --git a/docs/chamelium.txt b/docs/chamelium.txt
> index ed154990..0cabcdc6 100644
> --- a/docs/chamelium.txt
> +++ b/docs/chamelium.txt
> @@ -44,6 +44,9 @@ It may be necessary to give the Chamelium a static IP address, depending on
>  the network setup. This can be configured (via the serial console) by editing
>  the Debian-styled /etc/network/interfaces configuration file.
>  
> +This document supposes that target PC's network IP has "192.168.1.1/24" and
> +the Chamelium's network IP has "192.168.1.2/24".
> +
>  Chamelium support requires setting up dedicated IGT configuration, as explained
>  in the Core and Chamelium parts of the IGT API Reference in the documentation.
>  
> @@ -60,14 +63,44 @@ by the IGT tests is common to all connectors and thus one machine running a test
>  on a given connector may reset the Chamelium while another machine is running
>  a test on another connector.
>  
> -An example fully-featured configuration follows:
> +IGT's behavior can be configured through a configuration file.
> +By default, this file is expected to exist in ~/.igtrc
> +In order to run tests using the Chamelium, a valid configuration file must be
> +present. It must contain Chamelium-specific keys as shown with the following
> +example:
> +
> +# The common configuration section follows.
>  [Common]
> +# The path to dump frames that fail comparison checks
>  FrameDumpPath=/root/
>  
> -[Chamelium]
> -URL=http://192.168.72.1:9992
> +# The following section is used for configuring the Device Under Test.
> +# It is not mandatory and allows overriding default values.
> +[DUT]
> +SuspendResumeDelay=15
>  
> +[Chamelium]
> +# The URL used for connecting to the Chamelium's RPC server
> +URL=http://192.168.1.2:9992
> +
> +# The rest of the sections are used for defining connector mappings.
> +# This is required so any tests using the Chamelium know which connector
> +# on the test machine should be connected to each Chamelium port.
> +#
> +# In the event that any of these mappings are specified incorrectly,
> +# any hotplugging tests for the incorrect connector mapping will fail.
> +
> +# The name of the DRM connector
> +# The DP-1 of [Chamelium:DP-1] and the HDMI-A-1 of [Chamelium:HDMI-A-1] indicate
> +# "connector info type" of /sys/kernel/debug/dri/0/i915_display_info.
>  [Chamelium:DP-1]
> +# The ChameliumPortID indicates physical port (device) id of a Chamelium Board.
> +# A Chamelium daemon program defines these port ids as
> +# DP1 (located next to the HDMI port) = 1
> +# DP2 (located next to the VGA connector) = 2
> +# HDMI = 3 and VGA = 4
> +# The port ids are defined at:
> +# https://chromium.googlesource.com/chromiumos/platform/chameleon/+/master/chameleond/utils/ids.py
>  ChameliumPortID=1
>  
>  [Chamelium:HDMI-A-2]
> @@ -76,8 +109,10 @@ ChameliumPortID=3
>  [Chamelium:VGA-1]
>  ChameliumPortID=4
>  
> -[DUT]
> -SuspendResumeDelay=2
> +Running the Chamelium With IGT
> +------------------------------
> +
> +$ ./scripts/run-tests.sh -t chamelium
>  
>  Debugging the Chamelium
>  -----------------------
>