[igt-dev] [PATCH i-g-t 3/3] tests/perf_pmu: Improve accuracy by waiting on spinner to start
Tvrtko Ursulin
tursulin at ursulin.net
Thu Mar 22 17:24:17 UTC 2018
From: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
More than one test assumes that the spinner is running pretty much
immediately after we have create or submitted it.
In actuality there is a variable delay, especially on execlists platforms,
between submission and spin batch starting to run on the hardware.
To enable tests which care about this level of timing to account for this,
we add a new spin batch constructor which provides an output field which
can be polled to determine when the batch actually started running.
This is implemented via MI_STOREDW_IMM from the spin batch, writing into
memory mapped page shared with userspace.
Using this facility from perf_pmu, where applicable, should improve very
occasional test fails across the set and platforms.
v2:
Chris Wilson:
* Use caching mapping if available.
* Handle old gens better.
* Use gem_can_store_dword.
* Cache exec obj array in spin_batch_t for easier resubmit.
v3:
* Forgot I915_EXEC_NO_RELOC. (Chris Wilson)
v4:
* Mask out all non-engine flags in gem_can_store_dword.
* Added some debug logging.
v5:
* Fix relocs and batch munmap. (Chris)
* Added assert idle spinner batch looks as expected.
v6:
* Skip accuracy tests when !gem_can_store_dword.
v7:
* Fix batch recursion reloc address.
v8:
Chris Wilson:
* Pull up gem_can_store_dword check before we start submitting.
* Build spinner batch in a way we can skip store dword when not
needed so we can run on SandyBridge.
v9:
* Fix wait on spinner.
* More tweaks to accuracy test.
v10:
* Dropped accuracy subtest changes due problems with RT thread and
tasklet submission.
v11:
* Use READ_ONCE.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
Suggested-by: Chris Wilson <chris at chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris at chris-wilson.co.uk> # v9
---
tests/perf_pmu.c | 151 +++++++++++++++++++++++++++++++++++++------------------
1 file changed, 103 insertions(+), 48 deletions(-)
diff --git a/tests/perf_pmu.c b/tests/perf_pmu.c
index 19fcc95ffc7f..f27b7ec7d2c2 100644
--- a/tests/perf_pmu.c
+++ b/tests/perf_pmu.c
@@ -170,6 +170,56 @@ static unsigned int e2ring(int gem_fd, const struct intel_execution_engine2 *e)
#define FLAG_LONG (16)
#define FLAG_HANG (32)
+static igt_spin_t * __spin_poll(int fd, uint32_t ctx, unsigned long flags)
+{
+ if (gem_can_store_dword(fd, flags))
+ return __igt_spin_batch_new_poll(fd, ctx, flags);
+ else
+ return __igt_spin_batch_new(fd, ctx, flags, 0);
+}
+
+static unsigned long __spin_wait(int fd, igt_spin_t *spin)
+{
+ struct timespec start = { };
+
+ igt_nsec_elapsed(&start);
+
+ if (spin->running) {
+ unsigned long timeout = 0;
+
+ while (!READ_ONCE(*spin->running)) {
+ unsigned long t = igt_nsec_elapsed(&start);
+
+ if ((t - timeout) > 250e6) {
+ timeout = t;
+ igt_warn("Spinner not running after %.2fms\n",
+ (double)t / 1e6);
+ }
+ }
+ } else {
+ igt_debug("__spin_wait - usleep mode\n");
+ usleep(500e3); /* Better than nothing! */
+ }
+
+ return igt_nsec_elapsed(&start);
+}
+
+static igt_spin_t * __spin_sync(int fd, uint32_t ctx, unsigned long flags)
+{
+ igt_spin_t *spin = __spin_poll(fd, ctx, flags);
+
+ __spin_wait(fd, spin);
+
+ return spin;
+}
+
+static igt_spin_t * spin_sync(int fd, uint32_t ctx, unsigned long flags)
+{
+ igt_require_gem(fd);
+
+ return __spin_sync(fd, ctx, flags);
+}
+
static void end_spin(int fd, igt_spin_t *spin, unsigned int flags)
{
if (!spin)
@@ -180,8 +230,25 @@ static void end_spin(int fd, igt_spin_t *spin, unsigned int flags)
if (flags & FLAG_SYNC)
gem_sync(fd, spin->handle);
- if (flags & TEST_TRAILING_IDLE)
- usleep(batch_duration_ns / 5000);
+ if (flags & TEST_TRAILING_IDLE) {
+ unsigned long t, timeout = 0;
+ struct timespec start = { };
+
+ igt_nsec_elapsed(&start);
+
+ do {
+ t = igt_nsec_elapsed(&start);
+
+ if (gem_bo_busy(fd, spin->handle) &&
+ (t - timeout) > 10e6) {
+ timeout = t;
+ igt_warn("Spinner not idle after %.2fms\n",
+ (double)t / 1e6);
+ }
+
+ usleep(1e3);
+ } while (t < batch_duration_ns / 5);
+ }
}
static void
@@ -195,7 +262,7 @@ single(int gem_fd, const struct intel_execution_engine2 *e, unsigned int flags)
fd = open_pmu(I915_PMU_ENGINE_BUSY(e->class, e->instance));
if (flags & TEST_BUSY)
- spin = igt_spin_batch_new(gem_fd, 0, e2ring(gem_fd, e), 0);
+ spin = spin_sync(gem_fd, 0, e2ring(gem_fd, e));
else
spin = NULL;
@@ -251,13 +318,7 @@ busy_start(int gem_fd, const struct intel_execution_engine2 *e)
*/
sleep(2);
- spin = __igt_spin_batch_new(gem_fd, 0, e2ring(gem_fd, e), 0);
-
- /*
- * Sleep for a bit after making the engine busy to make sure the PMU
- * gets enabled when the batch is already running.
- */
- usleep(500e3);
+ spin = __spin_sync(gem_fd, 0, e2ring(gem_fd, e));
fd = open_pmu(I915_PMU_ENGINE_BUSY(e->class, e->instance));
@@ -300,7 +361,7 @@ busy_double_start(int gem_fd, const struct intel_execution_engine2 *e)
* re-submission in execlists mode. Make sure busyness is correctly
* reported with the engine busy, and after the engine went idle.
*/
- spin[0] = __igt_spin_batch_new(gem_fd, 0, e2ring(gem_fd, e), 0);
+ spin[0] = __spin_sync(gem_fd, 0, e2ring(gem_fd, e));
usleep(500e3);
spin[1] = __igt_spin_batch_new(gem_fd, ctx, e2ring(gem_fd, e), 0);
@@ -386,7 +447,7 @@ busy_check_all(int gem_fd, const struct intel_execution_engine2 *e,
igt_assert_eq(i, num_engines);
- spin = igt_spin_batch_new(gem_fd, 0, e2ring(gem_fd, e), 0);
+ spin = spin_sync(gem_fd, 0, e2ring(gem_fd, e));
pmu_read_multi(fd[0], num_engines, tval[0]);
slept = measured_usleep(batch_duration_ns / 1000);
if (flags & TEST_TRAILING_IDLE)
@@ -412,15 +473,15 @@ busy_check_all(int gem_fd, const struct intel_execution_engine2 *e,
}
static void
-__submit_spin_batch(int gem_fd,
- struct drm_i915_gem_exec_object2 *obj,
- const struct intel_execution_engine2 *e)
+__submit_spin_batch(int gem_fd, igt_spin_t *spin,
+ const struct intel_execution_engine2 *e,
+ int offset)
{
- struct drm_i915_gem_execbuffer2 eb = {
- .buffer_count = 1,
- .buffers_ptr = to_user_pointer(obj),
- .flags = e2ring(gem_fd, e),
- };
+ struct drm_i915_gem_execbuffer2 eb = spin->execbuf;
+
+ eb.flags &= ~(0x3f | I915_EXEC_BSD_MASK);
+ eb.flags |= e2ring(gem_fd, e) | I915_EXEC_NO_RELOC;
+ eb.batch_start_offset += offset;
gem_execbuf(gem_fd, &eb);
}
@@ -429,7 +490,6 @@ static void
most_busy_check_all(int gem_fd, const struct intel_execution_engine2 *e,
const unsigned int num_engines, unsigned int flags)
{
- struct drm_i915_gem_exec_object2 obj = {};
const struct intel_execution_engine2 *e_;
uint64_t tval[2][num_engines];
uint64_t val[num_engines];
@@ -443,15 +503,12 @@ most_busy_check_all(int gem_fd, const struct intel_execution_engine2 *e,
if (!gem_has_engine(gem_fd, e_->class, e_->instance))
continue;
- if (e == e_) {
+ if (e == e_)
idle_idx = i;
- } else if (spin) {
- __submit_spin_batch(gem_fd, &obj, e_);
- } else {
- spin = igt_spin_batch_new(gem_fd, 0,
- e2ring(gem_fd, e_), 0);
- obj.handle = spin->handle;
- }
+ else if (spin)
+ __submit_spin_batch(gem_fd, spin, e_, 64);
+ else
+ spin = __spin_poll(gem_fd, 0, e2ring(gem_fd, e_));
val[i++] = I915_PMU_ENGINE_BUSY(e_->class, e_->instance);
}
@@ -461,6 +518,9 @@ most_busy_check_all(int gem_fd, const struct intel_execution_engine2 *e,
for (i = 0; i < num_engines; i++)
fd[i] = open_group(val[i], fd[0]);
+ /* Small delay to allow engines to start. */
+ usleep(__spin_wait(gem_fd, spin) * num_engines / 1e3);
+
pmu_read_multi(fd[0], num_engines, tval[0]);
slept = measured_usleep(batch_duration_ns / 1000);
if (flags & TEST_TRAILING_IDLE)
@@ -489,7 +549,6 @@ static void
all_busy_check_all(int gem_fd, const unsigned int num_engines,
unsigned int flags)
{
- struct drm_i915_gem_exec_object2 obj = {};
const struct intel_execution_engine2 *e;
uint64_t tval[2][num_engines];
uint64_t val[num_engines];
@@ -503,13 +562,10 @@ all_busy_check_all(int gem_fd, const unsigned int num_engines,
if (!gem_has_engine(gem_fd, e->class, e->instance))
continue;
- if (spin) {
- __submit_spin_batch(gem_fd, &obj, e);
- } else {
- spin = igt_spin_batch_new(gem_fd, 0,
- e2ring(gem_fd, e), 0);
- obj.handle = spin->handle;
- }
+ if (spin)
+ __submit_spin_batch(gem_fd, spin, e, 64);
+ else
+ spin = __spin_poll(gem_fd, 0, e2ring(gem_fd, e));
val[i++] = I915_PMU_ENGINE_BUSY(e->class, e->instance);
}
@@ -519,6 +575,9 @@ all_busy_check_all(int gem_fd, const unsigned int num_engines,
for (i = 0; i < num_engines; i++)
fd[i] = open_group(val[i], fd[0]);
+ /* Small delay to allow engines to start. */
+ usleep(__spin_wait(gem_fd, spin) * num_engines / 1e3);
+
pmu_read_multi(fd[0], num_engines, tval[0]);
slept = measured_usleep(batch_duration_ns / 1000);
if (flags & TEST_TRAILING_IDLE)
@@ -550,7 +609,7 @@ no_sema(int gem_fd, const struct intel_execution_engine2 *e, unsigned int flags)
open_group(I915_PMU_ENGINE_WAIT(e->class, e->instance), fd);
if (flags & TEST_BUSY)
- spin = igt_spin_batch_new(gem_fd, 0, e2ring(gem_fd, e), 0);
+ spin = spin_sync(gem_fd, 0, e2ring(gem_fd, e));
else
spin = NULL;
@@ -884,7 +943,7 @@ multi_client(int gem_fd, const struct intel_execution_engine2 *e)
*/
fd[1] = open_pmu(config);
- spin = igt_spin_batch_new(gem_fd, 0, e2ring(gem_fd, e), 0);
+ spin = spin_sync(gem_fd, 0, e2ring(gem_fd, e));
val[0] = val[1] = __pmu_read_single(fd[0], &ts[0]);
slept[1] = measured_usleep(batch_duration_ns / 1000);
@@ -1248,7 +1307,7 @@ test_frequency(int gem_fd)
igt_require(igt_sysfs_get_u32(sysfs, "gt_boost_freq_mhz") == min_freq);
gem_quiescent_gpu(gem_fd); /* Idle to be sure the change takes effect */
- spin = igt_spin_batch_new(gem_fd, 0, I915_EXEC_RENDER, 0);
+ spin = spin_sync(gem_fd, 0, I915_EXEC_RENDER);
slept = pmu_read_multi(fd, 2, start);
measured_usleep(batch_duration_ns / 1000);
@@ -1274,7 +1333,7 @@ test_frequency(int gem_fd)
igt_require(igt_sysfs_get_u32(sysfs, "gt_min_freq_mhz") == max_freq);
gem_quiescent_gpu(gem_fd);
- spin = igt_spin_batch_new(gem_fd, 0, I915_EXEC_RENDER, 0);
+ spin = spin_sync(gem_fd, 0, I915_EXEC_RENDER);
slept = pmu_read_multi(fd, 2, start);
measured_usleep(batch_duration_ns / 1000);
@@ -1517,7 +1576,6 @@ accuracy(int gem_fd, const struct intel_execution_engine2 *e,
const unsigned long timeout[] = {
pwm_calibration_us * 1000, test_us * 1000
};
- struct drm_i915_gem_exec_object2 obj = {};
uint64_t total_busy_ns = 0, total_idle_ns = 0;
igt_spin_t *spin;
int ret;
@@ -1531,11 +1589,8 @@ accuracy(int gem_fd, const struct intel_execution_engine2 *e,
/* Allocate our spin batch and idle it. */
spin = igt_spin_batch_new(gem_fd, 0, e2ring(gem_fd, e), 0);
- obj.handle = spin->handle;
- __submit_spin_batch(gem_fd, &obj, e); /* record its location */
igt_spin_batch_end(spin);
- gem_sync(gem_fd, obj.handle);
- obj.flags |= EXEC_OBJECT_PINNED;
+ gem_sync(gem_fd, spin->handle);
/* 1st pass is calibration, second pass is the test. */
for (int pass = 0; pass < ARRAY_SIZE(timeout); pass++) {
@@ -1549,7 +1604,7 @@ accuracy(int gem_fd, const struct intel_execution_engine2 *e,
/* Restart the spinbatch. */
__rearm_spin_batch(spin);
- __submit_spin_batch(gem_fd, &obj, e);
+ __submit_spin_batch(gem_fd, spin, e, 0);
/*
* Note that the submission may be delayed to a
@@ -1559,7 +1614,7 @@ accuracy(int gem_fd, const struct intel_execution_engine2 *e,
t_busy = measured_usleep(busy_us);
igt_spin_batch_end(spin);
- gem_sync(gem_fd, obj.handle);
+ gem_sync(gem_fd, spin->handle);
total_busy_ns += t_busy;
--
2.14.1
More information about the igt-dev
mailing list