[igt-dev] [PATCH i-g-t v3 4/5] [intel-gfx] tests/pm_dc: Added test for DC5 during DPMS

[Imre Deak]

On Sat, Nov 03, 2018 at 07:36:05AM -0400, Jyoti Yadav wrote:
> Added new subtest for DC5 entry during DPMS on/off cycle.
> During DPMS on/off cycle DC5 counter is incremented.
> 
> v2: Rename the subtest with meaningful name.
> v3: Rebased
> 
> Signed-off-by: Jyoti Yadav <jyoti.r.yadav at intel.com>
> ---
>  tests/pm_dc.c | 35 ++++++++++++++++++++++++++++++++++-
>  1 file changed, 34 insertions(+), 1 deletion(-)
> 
> diff --git a/tests/pm_dc.c b/tests/pm_dc.c
> index 3ecfb1c..d47b837 100644
> --- a/tests/pm_dc.c
> +++ b/tests/pm_dc.c
> @@ -171,6 +171,29 @@ static void test_dc_state_psr(data_t *data, int dc_flag)
>  	check_dc_counter(data->drm_fd, dc_flag, dc_counter_before_psr);
>  }
>  
> +static void dpms_off_on(data_t *data)
> +{
> +	for (int i = 0; i < data->display.n_outputs; i++) {
> +		kmstest_set_connector_dpms(data->drm_fd, data->display.outputs[i].config.connector,
> +					   DRM_MODE_DPMS_OFF);
> +	}
> +	igt_assert(igt_wait_for_pm_status(IGT_RUNTIME_PM_STATUS_SUSPENDED));
> +	for (int i = 0; i < data->display.n_outputs; i++) {
> +		kmstest_set_connector_dpms(data->drm_fd, data->display.outputs[i].config.connector,
> +				   DRM_MODE_DPMS_ON);
> +	}
> +	igt_assert(igt_wait_for_pm_status(IGT_RUNTIME_PM_STATUS_ACTIVE));
> +}
> +
> +static void test_dc_state_dpms(data_t *data, int dc_flag)
> +{
> +	uint32_t dc_counter;
> +
> +	dc_counter = read_dc_counter(data->drm_fd, dc_flag);
> +	dpms_off_on(data);
> +	check_dc_counter(data->drm_fd, dc_flag, dc_counter);
> +}
> +
>  int main(int argc, char *argv[])
>  {
>  	bool has_runtime_pm;
> @@ -208,13 +231,23 @@ int main(int argc, char *argv[])
>  		psr_enable(data.debugfs_fd);
>  		igt_require_f(edp_psr_sink_support(&data),
>  			      "Sink does not support PSR\n");
> -		/* Check DC5 counter is available for the platform.
> +		/* Check DC6 counter is available for the platform.

Should be fixed in the patch adding this.

>  		 * Skip the test if counter is not available.
>  		 */
>  		read_dc_counter(data.drm_fd, CHECK_DC6);
>  		test_dc_state_psr(&data, CHECK_DC6);
>  		cleanup(&data);
>  	}
> +
> +	igt_subtest("dc5-dpms") {
> +		/* Check DC5 counter is available for the platform.
> +		 * Skip the test if counter is not available.
> +		 */
> +		read_dc_counter(data.drm_fd, CHECK_DC5);
> +		test_dc_state_dpms(&data, CHECK_DC5);
> +	//	cleanup(&data);

Leftover code.

> +	}
> +
>  	igt_fixture {
>  		close(data.debugfs_fd);
>  		display_fini(&data);
> -- 
> 1.9.1
>