[igt-dev] [PATCH i-g-t] test/kms_dp_dsc: Basic KMS test to validate VESA DSC on DP/eDP

Antonio Argenziano antonio.argenziano at intel.com
Wed Oct 10 15:48:37 UTC 2018



On 05/10/18 16:34, Manasi Navare wrote:
> This patch adds a basic kms test to validate the display stream
> compression functionality if supported on DP/eDP connector.
> Currently this has only one subtest to force the DSC on all
> the connectors that support it with default parameters.
> This will be expanded to add more subtests to tweak DSC parameters.
> 
> Cc: Anusha Srivatsa <anusha.srivatsa at intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
> ---
>   tests/Makefile.sources |   1 +
>   tests/kms_dp_dsc.c     | 372 +++++++++++++++++++++++++++++++++++++++++
>   2 files changed, 373 insertions(+)
>   create mode 100644 tests/kms_dp_dsc.c
> 
> diff --git a/tests/Makefile.sources b/tests/Makefile.sources
> index c84933f1..c807aad3 100644
> --- a/tests/Makefile.sources
> +++ b/tests/Makefile.sources
> @@ -207,6 +207,7 @@ TESTS_progs = \
>   	kms_tv_load_detect \
>   	kms_universal_plane \
>   	kms_vblank \
> +	kms_dp_dsc \

Add test in meson build as well.

>   	meta_test \
>   	perf \
>   	perf_pmu \
> diff --git a/tests/kms_dp_dsc.c b/tests/kms_dp_dsc.c
> new file mode 100644
> index 00000000..d0fd2ae3
> --- /dev/null
> +++ b/tests/kms_dp_dsc.c
> @@ -0,0 +1,372 @@
> +/*
> + * Copyright © 2017 Intel Corporation
> + *
> + * Displayport Display Stream Compression test
> + *
> + * Authors:
> + * Manasi Navare <manasi.d.navare at intel.com>
> + *
> + * Elements of the modeset code adapted from David Herrmann's
> + * DRM modeset example
> + *
> + */
> +#include "igt.h"
> +#include <errno.h>
> +#include <getopt.h>
> +#include <math.h>
> +#include <stdint.h>
> +#include <stdbool.h>
> +#include <strings.h>
> +#include <unistd.h>
> +#include <stdlib.h>
> +#include <signal.h>
> +#include <time.h>
> +#include <fcntl.h>
> +#include <termios.h>
> +
> +int drm_fd;
> +drmModeRes *resources;
> +uint64_t tiling = LOCAL_DRM_FORMAT_MOD_NONE;

^ Seems to be used only in one place, why not use the macro directly?

> +
> +struct connector {
> +	uint32_t id;
> +	int mode_valid;
> +	drmModeModeInfo mode;
> +	drmModeConnector *connector;
> +	drmModeEncoder *encoder;
> +	int crtc, pipe;
> +};
> +
> +struct dsc_config {
> +	char test_name[128];
> +	int mode_width;
> +	int mode_height;
> +	int bpp;
> +	int depth;
> +	bool dsc_supported;
> +	bool dsc_enable;
> +};
> +
> +static FILE *fopenat(int dir, const char *name, const char *mode)
> +{
> +	int fd = openat(dir, name, O_RDWR);
> +	return fdopen(fd, mode);
> +}
> +
> +static bool get_dp_dsc_support(char *test_connector_name)
> +{
> +	int dir = igt_debugfs_dir(drm_fd);
> +	FILE *dsc_support_fp = NULL;
> +	char *line = NULL;
> +	size_t line_size = 0;
> +	char buf[128] = {0}, supported_str[5], enabled_str[5];
> +	bool supported = false;
> +
> +	strcpy(buf, test_connector_name);
> +	strcat(buf, "/i915_dsc_support");
> +	dsc_support_fp = fopenat(dir, buf, "r");
> +	igt_require(dsc_support_fp);

don't we have something similar in igt_debugfs already (igt_debugfs_read)?

> +
> +	while (getline(&line, &line_size, dsc_support_fp) > 0) {
> +		char *support, *enabled;
> +
> +		enabled = strstr(line, "Enabled: ");
> +		igt_assert_eq(sscanf(enabled, "Enabled: %s", enabled_str), 1);
> +		if (strcmp(enabled_str, "yes") == 0) {
> +			igt_info("DSC is enabled on %s\n", test_connector_name);
> +			supported = true;
> +			break;
> +		} else {
> +			getline(&line, &line_size, dsc_support_fp);
> +			support = strstr(line, "Supported: ");
> +		igt_assert_eq(sscanf(support, "Supported: %s", supported_str), 1);
> +		if (strcmp(supported_str, "yes") == 0)
> +			supported = true;
> +		else if (strcmp(supported_str, "no") == 0)
> +			supported = false;
> +		else
> +			igt_fail_on_f(true, "Unknown DSC supported status '%s'\n",
> +				      supported_str);
> +		break;
> +		}https://jira01.devtools.intel.com/browse/GUC-306
> +	}
> +
> +	free(line);
> +	fclose(dsc_support_fp);
> +
> +	return supported;
> +}
> +
> +static void set_dp_dsc_enable(bool enable, char *test_connector_name)
> +{
> +	int dir = igt_debugfs_dir(drm_fd);
> +	FILE *dsc_enable_fp = NULL;
> +	char buf[128] = {0};
> +
> +	strcpy(buf, test_connector_name);
> +	strcat(buf, "/i915_dsc_support");
> +	dsc_enable_fp = fopenat(dir, buf, "w+");
> +	igt_require(dsc_enable_fp);
> +	rewind(dsc_enable_fp);
> +	igt_info("Setting DSC_ENABLE to %s for %s\n", (enable) ? "true" : "false", test_connector_name);
> +	fprintf(dsc_enable_fp, "%d", enable);
> +	fflush(dsc_enable_fp);
> +	fclose(dsc_enable_fp);
> +}
> +
> +static void dump_connectors_fd(int drmfd)
> +{
> +	int i, j;
> +
> +	drmModeRes *mode_resources = drmModeGetResources(drmfd);
> +
> +        if (!mode_resources) {
> +		igt_warn("drmModeGetResources failed: %s\n", strerror(errno));
> +		return;
> +	}
> +
> +	igt_info("Connectors:\n");
> +	igt_info("id\tencoder\tstatus\t\ttype\tsize (mm)\tmodes\n");
> +	for (i = 0; i < mode_resources->count_connectors; i++) {
> +		drmModeConnector *connector;
> +
> +		connector = drmModeGetConnectorCurrent(drmfd,
> +						       mode_resources->connectors[i]);
> +		if (!connector) {
> +			igt_warn("could not get connector %i: %s\n",
> +				 mode_resources->connectors[i], strerror(errno));
> +			continue;
> +		}
> +
> +		igt_info("%d\t%d\t%s\t%s\t%dx%d\t\t%d\n",
> +			 connector->connector_id, connector->encoder_id,
> +			 kmstest_connector_status_str(connector->connection),
> +			 kmstest_connector_type_str(connector->connector_type),
> +			 connector->mmWidth, connector->mmHeight,
> +			 connector->count_modes);
> +
> +		if (!connector->count_modes)

Need to free the connector here.

> +			continue;
> +
> +		igt_info("  modes:\n");
> +		igt_info("  name refresh (Hz) hdisp hss hse htot vdisp ""vss vse vtot flags type clock\n");
> +		for (j = 0; j < connector->count_modes; j++){
> +			igt_info("[%d]", j);
> +			kmstest_dump_mode(&connector->modes[j]);
> +		}
> +
> +		drmModeFreeConnector(connector);
> +	}
> +	igt_info("\n");
> +
> +	drmModeFreeResources(mode_resources);
> +}
> +
> +static void dump_crtcs_fd(int drmfd)
> +{
> +	int i;
> +	drmModeRes *mode_resources = drmModeGetResources(drmfd);
> +
> +	igt_info("CRTCs:\n");
> +	igt_info("id\tfb\tpos\tsize\n");
> +	for (i = 0; i < mode_resources->count_crtcs; i++) {
> +		drmModeCrtc *crtc;
> +
> +		crtc = drmModeGetCrtc(drmfd, mode_resources->crtcs[i]);
> +		if (!crtc) {
> +			igt_warn("could not get crtc %i: %s\n",
> +				 mode_resources->crtcs[i], strerror(errno));
> +			continue;
> +		}
> +		igt_info("%d\t%d\t(%d,%d)\t(%dx%d)\n",
> +			 crtc->crtc_id, crtc->buffer_id, crtc->x,
> +			 crtc->y, crtc->width, crtc->height);
> +		kmstest_dump_mode(&crtc->mode);
> +
> +		drmModeFreeCrtc(crtc);
> +	}
> +	igt_info("\n");
> +
> +	drmModeFreeResources(mode_resources);
> +}
> +
> +static void dump_info(void)
> +{
> +	dump_connectors_fd(drm_fd);
> +	dump_crtcs_fd(drm_fd);
> +}
> +
> +static int
> +set_mode(struct connector *c, struct dsc_config *test_config, bool set_mode)
> +{
> +	unsigned int fb_id = 0;
> +	struct igt_fb fb_info;
> +	int ret = 0;
> +
> +	if (!set_mode) {
> +		ret = drmModeSetCrtc(drm_fd, c->crtc, 0, 0, 0,
> +				     NULL, 0, NULL);
> +		if (ret)
> +			igt_warn("Failed to unset mode");
> +		return ret;
> +	}
> +
> +	fb_id = igt_create_pattern_fb(drm_fd, test_config->mode_width,
> +				      test_config->mode_height,
> +				      igt_bpp_depth_to_drm_format(test_config->bpp,
> +								  test_config->depth),
> +				      tiling, &fb_info);
> +
> +	igt_info("CRTC(%u):[%d]", c->crtc, 0);
> +	kmstest_dump_mode(&c->mode);
> +	drmModeSetCrtc(drm_fd, c->crtc, -1, 0, 0, NULL, 0, NULL);
> +	ret = drmModeSetCrtc(drm_fd, c->crtc, fb_id, 0, 0,
> +			     &c->id, 1, &c->mode);
> +	sleep(5);

Why the sleep before checking the return code?

> +	if (ret < 0) {
> +		igt_warn("Failed to set mode (%dx%d@%dHz): %s\n",
> +			 test_config->mode_width, test_config->mode_height,
> +			 c->mode.vrefresh, strerror(errno));
> +		igt_remove_fb(drm_fd, &fb_info);
> +
> +	}
> +
> +	return ret;
> +}
> +
> +
> +/*
> + * Re-probe connectors and do a modeset with and wihout DSC
> + *
> + * Returns:
> + * 0: On Success
> + * -1: On failure
> + */
> +static int update_display(struct dsc_config *test_config)
> +{
> +	struct connector *connectors;
> +	struct kmstest_connector_config config;
> +	int cnt, conn_cnt = 0, ret = 0, edp_cnt = 0, dp_cnt = 0;
> +	unsigned long crtc_idx_mask = -1UL;
> +	char conn_buf[128] = {0};
> +
> +	resources = drmModeGetResources(drm_fd);
> +	if (!resources) {
> +		igt_warn("drmModeGetResources failed: %s\n", strerror(errno));
> +		return -1;
> +	}
> +
> +	connectors = calloc(resources->count_connectors,
> +			    sizeof(struct connector));
> +	if (!connectors)
> +		return -1;
> +
> +	/* Find any connected displays */
> +	for (cnt = 0; cnt < resources->count_connectors; cnt++) {
> +		struct connector *c = &connectors[cnt];
> +		c->id = resources->connectors[cnt];
> +		if(!kmstest_get_connector_config(drm_fd, c->id, crtc_idx_mask,
> +						&config)) {
> +			c->mode_valid = 0;
> +			continue;
> +		}
> +		c->connector = config.connector;
> +		c->encoder = config.encoder;
> +		c->mode = config.default_mode;
> +		c->crtc = config.crtc->crtc_id;
> +		c->pipe = config.pipe;
> +		c->mode_valid = 1;
> +
> +		if (c->connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
> +		    c->connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
> +
> +			if (c->connector->connector_type == DRM_MODE_CONNECTOR_eDP)
> +				conn_cnt = ++ edp_cnt;
> +			else
> +				conn_cnt = ++ dp_cnt;
> +			if (c->connector->connection == DRM_MODE_CONNECTED) {
> +				sprintf(conn_buf, "%s-%d",
> +					kmstest_connector_type_str(c->connector->connector_type),
> +					conn_cnt);
> +				test_config->dsc_supported =
> +					get_dp_dsc_support(conn_buf);
> +				if (!strcmp(test_config->test_name,
> +					    "force_dsc_enable_basic")) {
> +					if (test_config->dsc_supported) {
> +						igt_info ("DSC is supported on %s\n",
> +							  conn_buf);
> +						test_config->mode_width = c->mode.hdisplay;
> +						test_config->mode_height = c->mode.vdisplay;
> +						test_config->bpp = 32;
> +						test_config->depth = 24;
> +						set_dp_dsc_enable(test_config->dsc_enable,
> +							  conn_buf);
> +						ret = set_mode(c, test_config,
> +							       true);
> +					} else {
> +						igt_info ("DSC is not supported on %s\n",
> +							  conn_buf);
> +					}
> +				}
> +				crtc_idx_mask &= ~(1 << c->pipe);
> +			}
> +		}
> +	}
> +
> +	free(connectors);
> +	drmModeFreeResources(resources);
> +	return ret;
> +}
> +
> +static int opt_handler(int opt, int opt_index, void *opt_dump)
> +{

Why not wrapping all the optional prints in igt_debug so you could 
re-use the --debug option?

> +	bool *dump = opt_dump;
> +
> +	switch (opt) {
> +	case 'i':
> +		*dump = true;
> +		break;
> +	default:
> +		igt_assert(0);
> +	}
> +
> +	return 0;
> +}
> +
> +int main(int argc, char *argv[])
> +{
> +	const char *help_str =
> +		"  --info\t\tDump Information about connectors. (still needs DRM access)\n";
> +	static struct option long_options[] = {
> +		{"info", 0, 0, 'i'},
> +		{0, 0, 0, 0}
> +	};
> +	int ret = 0;
> +	struct dsc_config test_config;
> +	bool opt_dump = false;
> +	igt_subtest_init_parse_opts(&argc, argv, "", long_options, help_str,
> +				    opt_handler, &opt_dump);
> +
> +	igt_skip_on_simulation();
> +
> +	igt_fixture {
> +		kmstest_set_vt_graphics_mode();
> +		drm_fd = drm_open_driver(DRIVER_ANY);
> +		if (opt_dump)
> +			dump_info();
> +	}
> +
> +	igt_subtest("force_dsc_enable_basic") {
> +		strcpy(test_config.test_name,"force_dsc_enable_basic");
> +		ret = update_display(&test_config);

'test_config' seems to be an output parameter but it is not used in the 
test.

> +		igt_assert_eq(ret, 0);
> +	}
> +
> +	close(drm_fd);
> +
> +	igt_assert_eq(ret, 0);

'ret' is already checked in the subtest also, this would fail if you 
don't run the subtest.

Comments mostly from a rapid read. You will still need a proper reviewer 
for the KMS stuff.

Thanks,
Antonio

> +
> +	igt_info("DSC testing done\n");
> +	igt_exit();
> +
> +}
> 


More information about the igt-dev mailing list