[igt-dev] [PATCH i-g-t v5 2/2] igt/tests/kms_atomic_transition: Tolerate if can't have all planes
Stanislav Lisovskiy
stanislav.lisovskiy at intel.com
Thu Apr 4 12:13:59 UTC 2019
With some upcoming changes i915 might not allow
all sprite planes enabled, depending on available
bandwidth limitation. Thus the test need to decrement
amount of planes and try again, instead of panicking.
v2: Removed excessive nested conditions, making code a bit
more readable(hopefully).
v3: Stopped using global n_planes variable as it might cause
resources being unreleased.
Using now parms[i].mask as a way to determine if plane
has to be included into commit.
v4: Removed unneeded n_overlays initialization.
v5: Randomize which of sprite planes to remove if hitting
resource limits.
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy at intel.com>
---
tests/kms_atomic_transition.c | 123 ++++++++++++++++++++--------------
1 file changed, 71 insertions(+), 52 deletions(-)
diff --git a/tests/kms_atomic_transition.c b/tests/kms_atomic_transition.c
index 638fe17e..e6d55ca0 100644
--- a/tests/kms_atomic_transition.c
+++ b/tests/kms_atomic_transition.c
@@ -212,9 +212,12 @@ static void setup_parms(igt_display_t *display, enum pipe pipe,
unsigned sprite_width, sprite_height, prev_w, prev_h;
bool max_sprite_width, max_sprite_height, alpha = true;
uint32_t n_planes = display->pipes[pipe].n_planes;
- uint32_t n_overlays = 0, overlays[n_planes];
+ uint32_t n_overlays, overlays[n_planes];
igt_plane_t *plane;
- uint32_t iter_mask = 3;
+ uint32_t iter_mask;
+ int retries = n_planes - 1;
+ int ret = 0;
+ uint32_t planes_to_remove;
do_or_die(drmGetCap(display->drm_fd, DRM_CAP_CURSOR_WIDTH, &cursor_width));
if (cursor_width >= mode->hdisplay)
@@ -224,6 +227,11 @@ static void setup_parms(igt_display_t *display, enum pipe pipe,
if (cursor_height >= mode->vdisplay)
cursor_height = mode->vdisplay;
+retry:
+ n_overlays = 0;
+ iter_mask = 3;
+ planes_to_remove = display->pipes[pipe].n_planes - n_planes;
+
for_each_plane_on_pipe(display, pipe, plane) {
int i = plane->index;
@@ -238,12 +246,30 @@ static void setup_parms(igt_display_t *display, enum pipe pipe,
parms[i].height = cursor_height;
parms[i].mask = 1 << 1;
} else {
- parms[i].fb = sprite_fb;
- parms[i].mask = 1 << 2;
-
- iter_mask |= 1 << 2;
-
- overlays[n_overlays++] = i;
+ /* Randomize if we remove that sprite plane or not */
+ uint32_t remove = hars_petruska_f54_1_random_unsafe_max(2);
+ /*
+ * Figure out how much sprite planes left:
+ * planes left = overall amount - 1 primary - 1 cursor - sprite planes used
+ */
+ int planes_left = display->pipes[pipe].n_planes - 2 - n_overlays;
+ /*
+ * Remove the plane if remove is set and we have sprite planes to remove.
+ * If we have left same or less amount of planes than we need
+ * to remove then no randomization, just remove.
+ */
+ if ((remove && planes_to_remove > 0) || (planes_to_remove >= planes_left)) {
+ parms[i].fb = NULL;
+ parms[i].mask = 0;
+ planes_to_remove--;
+ igt_warn("Removed plane %d\n", i);
+ }
+ else {
+ parms[i].fb = sprite_fb;
+ parms[i].mask = 1 << 2;
+ iter_mask |= 1 << 2;
+ overlays[n_overlays++] = i;
+ }
}
}
@@ -278,16 +304,13 @@ static void setup_parms(igt_display_t *display, enum pipe pipe,
* Pre gen9 not all sizes are supported, find the biggest possible
* size that can be enabled on all sprite planes.
*/
-retry:
prev_w = sprite_width = cursor_width;
prev_h = sprite_height = cursor_height;
max_sprite_width = (sprite_width == mode->hdisplay);
max_sprite_height = (sprite_height == mode->vdisplay);
- while (1) {
- int ret;
-
+ while (!max_sprite_width && !max_sprite_height) {
set_sprite_wh(display, pipe, parms, sprite_fb,
alpha, sprite_width, sprite_height);
@@ -295,54 +318,49 @@ retry:
ret = igt_display_try_commit_atomic(display, DRM_MODE_ATOMIC_TEST_ONLY | DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
igt_assert(!is_atomic_check_failure_errno(ret));
- if (is_atomic_check_plane_size_errno(ret)) {
- if (cursor_width == sprite_width &&
- cursor_height == sprite_height) {
- igt_assert_f(alpha,
- "Cannot configure the test with all sprite planes enabled\n");
-
- /* retry once with XRGB format. */
- alpha = false;
- goto retry;
- }
-
- sprite_width = prev_w;
- sprite_height = prev_h;
-
- if (max_sprite_width && max_sprite_height) {
- set_sprite_wh(display, pipe, parms, sprite_fb,
- alpha, sprite_width, sprite_height);
- break;
- }
-
- if (!max_sprite_width)
- max_sprite_width = true;
- else
- max_sprite_height = true;
- } else {
+ if (!is_atomic_check_plane_size_errno(ret)) {
prev_w = sprite_width;
prev_h = sprite_height;
- }
-
- if (!max_sprite_width) {
- sprite_width *= 2;
-
+
+ sprite_width *= max_sprite_width ? 1 : 2;
if (sprite_width >= mode->hdisplay) {
max_sprite_width = true;
-
sprite_width = mode->hdisplay;
}
- } else if (!max_sprite_height) {
- sprite_height *= 2;
+ sprite_height *= max_sprite_height ? 1 : 2;
if (sprite_height >= mode->vdisplay) {
max_sprite_height = true;
-
sprite_height = mode->vdisplay;
}
- } else
- /* Max sized sprites for all! */
- break;
+ continue;
+ }
+
+ if (cursor_width == sprite_width &&
+ cursor_height == sprite_height) {
+ igt_assert_f(retries > 0,
+ "Cannot configure the test with all sprite planes enabled\n");
+ --retries;
+ /* retry once with XRGB format. */
+ if (alpha) {
+ alpha = false;
+ igt_warn("Removed alpha\n");
+ }
+ else {
+ igt_assert_f(n_planes > 1, "No planes left to proceed with!");
+ n_planes--;
+ igt_warn("Reduced available planes to %d\n", n_planes);
+ }
+ goto retry;
+ }
+
+ sprite_width = prev_w;
+ sprite_height = prev_h;
+
+ if (!max_sprite_width)
+ max_sprite_width = true;
+ else
+ max_sprite_height = true;
}
igt_info("Running test on pipe %s with resolution %dx%d and sprite size %dx%d alpha %i\n",
@@ -463,7 +481,6 @@ run_transition_test(igt_display_t *display, enum pipe pipe, igt_output_t *output
if (flags & DRM_MODE_ATOMIC_ALLOW_MODESET) {
igt_output_set_pipe(output, PIPE_NONE);
-
igt_display_commit2(display, COMMIT_ATOMIC);
igt_output_set_pipe(output, pipe);
@@ -525,8 +542,10 @@ run_transition_test(igt_display_t *display, enum pipe pipe, igt_output_t *output
}
/* force planes to be part of commit */
- for_each_plane_on_pipe(display, pipe, plane)
- igt_plane_set_position(plane, 0, 0);
+ for_each_plane_on_pipe(display, pipe, plane) {
+ if (parms[plane->index].mask)
+ igt_plane_set_position(plane, 0, 0);
+ }
igt_display_commit2(display, COMMIT_ATOMIC);
--
2.17.1
More information about the igt-dev
mailing list