[igt-dev] [PATCH i-g-t] tests/kms_plane_multiple: before going testing check how many planes are allowed
Souza, Jose
jose.souza at intel.com
Wed Apr 10 20:06:27 UTC 2019
On Tue, 2019-04-09 at 14:47 +0300, Juha-Pekka Heikkila wrote:
> On 9.4.2019 4.29, Souza, Jose wrote:
> > On Fri, 2019-04-05 at 17:55 +0300, Juha-Pekka Heikkila wrote:
> > > before start testing try out how many planes kernel will
> > > allow simultaneously to be used.
> > >
> > > v2 (Jose Souza, Daniel Vetter): Fix resource leaks. Randomize
> > > used planes.
> > >
> > > Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila at gmail.com>
> > > ---
> > > tests/kms_plane_multiple.c | 88
> > > +++++++++++++++++++++++++++++++++++++---------
> > > 1 file changed, 71 insertions(+), 17 deletions(-)
> > >
> > > diff --git a/tests/kms_plane_multiple.c
> > > b/tests/kms_plane_multiple.c
> > > index bfaeede..f2707dc 100644
> > > --- a/tests/kms_plane_multiple.c
> > > +++ b/tests/kms_plane_multiple.c
> > > @@ -80,16 +80,6 @@ static void test_fini(data_t *data,
> > > igt_output_t
> > > *output, int n_planes)
> > > {
> > > igt_pipe_crc_stop(data->pipe_crc);
> > >
> > > - for (int i = 0; i < n_planes; i++) {
> > > - igt_plane_t *plane = data->plane[i];
> > > - if (!plane)
> > > - continue;
> > > - if (plane->type == DRM_PLANE_TYPE_PRIMARY)
> > > - continue;
> > > - igt_plane_set_fb(plane, NULL);
> > > - data->plane[i] = NULL;
> > > - }
> > > -
> > > /* reset the constraint on the pipe */
> > > igt_output_set_pipe(output, PIPE_ANY);
> > >
> > > @@ -99,7 +89,8 @@ static void test_fini(data_t *data,
> > > igt_output_t
> > > *output, int n_planes)
> > > free(data->plane);
> > > data->plane = NULL;
> > >
> > > - igt_remove_fb(data->drm_fd, data->fb);
> > > + free(data->fb);
> > > + data->fb = NULL;
> > >
> > > igt_display_reset(&data->display);
> > > }
> > > @@ -195,6 +186,7 @@ prepare_planes(data_t *data, enum pipe
> > > pipe_id,
> > > color_t *color,
> > > int *y;
> > > int *size;
> > > int i;
> > > + int* suffle;
> > >
> > > igt_output_set_pipe(output, pipe_id);
> > > primary = igt_output_get_plane_type(output,
> > > DRM_PLANE_TYPE_PRIMARY);
> > > @@ -206,6 +198,34 @@ prepare_planes(data_t *data, enum pipe
> > > pipe_id,
> > > color_t *color,
> > > igt_assert_f(y, "Failed to allocate %ld bytes for
> > > variable
> > > y\n", (long int) (pipe->n_planes * sizeof(*y)));
> > > size = malloc(pipe->n_planes * sizeof(*size));
> > > igt_assert_f(size, "Failed to allocate %ld bytes for
> > > variable
> > > size\n", (long int) (pipe->n_planes * sizeof(*size)));
> > > + suffle = malloc(pipe->n_planes * sizeof(*suffle));
> > > + igt_assert_f(suffle, "Failed to allocate %ld bytes for variable
> > > size\n", (long int) (pipe->n_planes * sizeof(*suffle)));
> > > +
> > > + for (i = 0; i < pipe->n_planes; i++)
> > > + suffle[i] = i;
> > > +
> > > + /*
> > > + * suffle table for planes. using rand() should keep it
> > > + * 'randomized in expected way'
> > > + */
> > > + for (i = 0; i < 256; i++) {
> >
> > Not beautiful at all
> >
> > > + int n, m;
> > > + int a, b;
> > > +
> > > + n = rand() % (pipe->n_planes-1);
> > > + m = rand() % (pipe->n_planes-1);
> > > +
> > > + /*
> > > + * keep primary plane at its place for test's sake.
> > > + */
> > > + if(n == primary->index || m == primary->index)
> > > + continue;
> > > +
> > > + a = suffle[n];
> > > + b = suffle[m];
> > > + suffle[n] = b;
> > > + suffle[m] = a;
> > > + }
> > >
> > > mode = igt_output_get_mode(output);
> > >
> > > @@ -213,7 +233,11 @@ prepare_planes(data_t *data, enum pipe
> > > pipe_id,
> > > color_t *color,
> > > x[primary->index] = 0;
> > > y[primary->index] = 0;
> > > for (i = 0; i < max_planes; i++) {
> > > - igt_plane_t *plane = igt_output_get_plane(output, i);
> > > + /*
> > > + * Here is made assumption primary plane will have
> > > + * index zero.
> > > + */
> > > + igt_plane_t *plane = igt_output_get_plane(output,
> > > suffle[i]);
> > > uint32_t plane_format;
> > > uint64_t plane_tiling;
> > >
> > > @@ -251,6 +275,10 @@ prepare_planes(data_t *data, enum pipe
> > > pipe_id,
> > > color_t *color,
> > > create_fb_for_mode_position(data, output, mode, color,
> > > x, y,
> > > size, size, tiling,
> > > max_planes);
> > > igt_plane_set_fb(data->plane[primary->index], &data-
> > > > fb[primary->index]);
> > > + free((void*)x);
> > > + free((void*)y);
> > > + free((void*)size);
> > > + free((void*)suffle);
> > > }
> > >
> > > static void
> > > @@ -260,7 +288,9 @@ test_plane_position_with_output(data_t *data,
> > > enum pipe pipe,
> > > {
> > > color_t blue = { 0.0f, 0.0f, 1.0f };
> > > igt_crc_t crc;
> > > + igt_plane_t *plane;
> > > int i;
> > > + int err, c = 0;
> > > int iterations = opt.iterations < 1 ? 1 :
> > > opt.iterations;
> > > bool loop_forever;
> > > char info[256];
> > > @@ -274,22 +304,46 @@ test_plane_position_with_output(data_t
> > > *data,
> > > enum pipe pipe,
> > > iterations, iterations > 1 ?
> > > "iterations" :
> > > "iteration");
> > > }
> > >
> > > - igt_info("Testing connector %s using pipe %s with %d planes %s
> > > with seed %d\n",
> > > - igt_output_name(output), kmstest_pipe_name(pipe),
> > > n_planes,
> > > - info, opt.seed);
> > > -
> > > test_init(data, pipe, n_planes);
> > >
> > > test_grab_crc(data, output, pipe, &blue, tiling);
> > >
> > > + /*
> > > + * Find out how many planes are allowed simultaneously
> > > + */
> > > + do {
> > > + c++;
> >
> > Adding one plane at time is a waste of CI time in platforms without
> > a
> > high number of planes(anything besides ICL), better start with max
> > and
> > decreasing until commit is accepted.
> >
>
> I'd rather not try to hammer in configurations which may not work,
> that's not what we're testing here. Time anyways is less than 6
> frames
> per loop so I don't think we are really wasting time.
Platforms with 3 planes will do 3 iterations with current approach
while it could be done with just one and ICL will will do 5
iterations(my ICL setup support 5 planes at the same time) while it
could be done in 3 iterations.
Now takes this additional iterations * 4 tests per pipe * number of
pipes and you have a considerable waste of CI time.
>
> > > + prepare_planes(data, pipe, &blue, tiling, c, output);
> > > + err = igt_display_try_commit2(&data->display,
> > > COMMIT_ATOMIC);
> >
> > No need to do a real commit here, you can only test with:
> >
> > err = igt_display_try_commit_atomic(&data->display,
> > DRM_MODE_ATOMIC_TEST_ONLY | DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
> >
> >
> > Also if a err different than -EINVAL is returned you should handle
> > like
> > a error.
> >
>
> We're just enabling planes in the commit, which error would you
> expect?
-ENOMEM is one example that I have without looking at the libdrm and
kernel code.
>
> > > +
> > > + for_each_plane_on_pipe(&data->display, pipe, plane)
> > > + igt_plane_set_fb(plane, NULL);
> > > +
> > > + for (int x = 0; x < c; x++)
> > > + igt_remove_fb(data->drm_fd, &data->fb[x]);
> >
> > This is still leaking, example:
> >
> > c = 3
> > plane 0, plane 1 and plane 3 enabled
> >
> > Other leak, the framebuffer created in test_grab_crc()
> >
> >
>
> Huh? hmm... Your comment doesn't make sense. Maybe you have confused
> idea of what plane vs framebuffer is or something?
Yeah, I checked again and you are not leaking, sorry about that.
>
> > > + } while (!err && c < n_planes);
> > > +
> > > + if(err)
> > > + c--;
> > > +
> > > + igt_info("Testing connector %s using pipe %s with %d planes %s
> > > with seed %d\n",
> > > + igt_output_name(output), kmstest_pipe_name(pipe), c,
> > > + info, opt.seed);
> > > +
> > > i = 0;
> > > while (i < iterations || loop_forever) {
> > > - prepare_planes(data, pipe, &blue, tiling, n_planes,
> > > output);
> > > + prepare_planes(data, pipe, &blue, tiling, c, output);
> > >
> > > igt_display_commit2(&data->display,
> > > COMMIT_ATOMIC);
> > >
> > > igt_pipe_crc_get_current(data->display.drm_fd,
> > > data-
> > > > pipe_crc, &crc);
> > >
> > > + for_each_plane_on_pipe(&data->display, pipe, plane)
> > > + igt_plane_set_fb(plane, NULL);
> > > +
> > > + for (int x = 0; x < c; x++)
> > > + igt_remove_fb(data->drm_fd, &data->fb[x]);
> >
> > move this cleanup to function and call it here and where you test
> > the
> > number of planes that can be enabled
> >
> > > +
> > > igt_assert_crc_equal(&data->ref_crc, &crc);
> > >
> > > i++;
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: This is a digitally signed message part
URL: <https://lists.freedesktop.org/archives/igt-dev/attachments/20190410/14be40e7/attachment.sig>
More information about the igt-dev
mailing list