[igt-dev] [PATCH i-g-t 1/1] tests/kms_rotation_crc: multiplane-rotation* faster

[Caz Yokoyama]

Drop because nobody respond. Maybe because of one of
- 42% faster has no value
- the patch breaks purpose of the test.
-caz

On Wed, 2019-04-03 at 12:11 -0700, Caz Yokoyama wrote:
> by rotating 1/4 of data.
> 
> The test rotated 20% horizontally, 40% vertically of 1920x1200
> display
> plane. This patch makes them 10% and 20% respectively.
> 
> paint_squares(), igt_display_try_commit2() and igt_pipe_crc_current()
> consume 99% of whole test. By this patch, paint_squares() and
> igt_display_try_commit2() run 42% faster. Remaining
> igt_pipe_crc_current()
> runs same because it is synchronized with vsync.
> multiplane-rotation-cropping-bottom sub test runs 22% faster.
> 
> Signed-off-by: Caz Yokoyama <caz.yokoyama at intel.com>
> Cc: Chris Wilson <chris at chris-wilson.co.uk>
> ---
>  tests/kms_rotation_crc.c | 48 ++++++++++++++++++++----------------
> ----
>  1 file changed, 24 insertions(+), 24 deletions(-)
> 
> diff --git a/tests/kms_rotation_crc.c b/tests/kms_rotation_crc.c
> index fc995d07..e0ba83da 100644
> --- a/tests/kms_rotation_crc.c
> +++ b/tests/kms_rotation_crc.c
> @@ -534,18 +534,18 @@ static void test_multi_plane_rotation(data_t
> *data, enum pipe pipe)
>  		float_t height;
>  		uint64_t tiling;
>  	} planeconfigs[] = {
> -	{IGT_ROTATION_0, .2f, .4f, LOCAL_DRM_FORMAT_MOD_NONE },
> -	{IGT_ROTATION_0, .2f, .4f, LOCAL_I915_FORMAT_MOD_X_TILED },
> -	{IGT_ROTATION_0, .2f, .4f, LOCAL_I915_FORMAT_MOD_Y_TILED },
> -	{IGT_ROTATION_0, .2f, .4f, LOCAL_I915_FORMAT_MOD_Yf_TILED },
> -	{IGT_ROTATION_90, .2f, .4f, LOCAL_I915_FORMAT_MOD_Y_TILED },
> -	{IGT_ROTATION_90, .2f, .4f, LOCAL_I915_FORMAT_MOD_Yf_TILED },
> -	{IGT_ROTATION_180, .2f, .4f, LOCAL_DRM_FORMAT_MOD_NONE },
> -	{IGT_ROTATION_180, .2f, .4f, LOCAL_I915_FORMAT_MOD_X_TILED },
> -	{IGT_ROTATION_180, .2f, .4f, LOCAL_I915_FORMAT_MOD_Y_TILED },
> -	{IGT_ROTATION_180, .2f, .4f, LOCAL_I915_FORMAT_MOD_Yf_TILED },
> -	{IGT_ROTATION_270, .2f, .4f, LOCAL_I915_FORMAT_MOD_Y_TILED },
> -	{IGT_ROTATION_270, .2f, .4f, LOCAL_I915_FORMAT_MOD_Yf_TILED },
> +	{IGT_ROTATION_0, .1f, .2f, LOCAL_DRM_FORMAT_MOD_NONE },
> +	{IGT_ROTATION_0, .1f, .2f, LOCAL_I915_FORMAT_MOD_X_TILED },
> +	{IGT_ROTATION_0, .1f, .2f, LOCAL_I915_FORMAT_MOD_Y_TILED },
> +	{IGT_ROTATION_0, .1f, .2f, LOCAL_I915_FORMAT_MOD_Yf_TILED },
> +	{IGT_ROTATION_90, .1f, .2f, LOCAL_I915_FORMAT_MOD_Y_TILED },
> +	{IGT_ROTATION_90, .1f, .2f, LOCAL_I915_FORMAT_MOD_Yf_TILED },
> +	{IGT_ROTATION_180, .1f, .2f, LOCAL_DRM_FORMAT_MOD_NONE },
> +	{IGT_ROTATION_180, .1f, .2f, LOCAL_I915_FORMAT_MOD_X_TILED },
> +	{IGT_ROTATION_180, .1f, .2f, LOCAL_I915_FORMAT_MOD_Y_TILED },
> +	{IGT_ROTATION_180, .1f, .2f, LOCAL_I915_FORMAT_MOD_Yf_TILED },
> +	{IGT_ROTATION_270, .1f, .2f, LOCAL_I915_FORMAT_MOD_Y_TILED },
> +	{IGT_ROTATION_270, .1f, .2f, LOCAL_I915_FORMAT_MOD_Yf_TILED },
>  	};
>  
>  	/*
> @@ -842,11 +842,11 @@ igt_main
>  		igt_require(gen >= 9);
>  		cleanup_crtc(&data);
>  		data.planepos[0].origo = p_top | p_left;
> -		data.planepos[0].x = .2f;
> -		data.planepos[0].y = .1f;
> +		data.planepos[0].x = .1f;
> +		data.planepos[0].y = .05f;
>  		data.planepos[1].origo = p_top | p_right;
> -		data.planepos[1].x = -.4f;
> -		data.planepos[1].y = .1f;
> +		data.planepos[1].x = -.2f;
> +		data.planepos[1].y = .05f;
>  		test_multi_plane_rotation(&data, 0);
>  	}
>  
> @@ -854,11 +854,11 @@ igt_main
>  		igt_require(gen >= 9);
>  		cleanup_crtc(&data);
>  		data.planepos[0].origo = p_top | p_left;
> -		data.planepos[0].x = -.05f;
> -		data.planepos[0].y = -.15f;
> +		data.planepos[0].x = -.025f;
> +		data.planepos[0].y = -.075f;
>  		data.planepos[1].origo = p_top | p_right;
> -		data.planepos[1].x = -.15f;
> -		data.planepos[1].y = -.15f;
> +		data.planepos[1].x = -.075f;
> +		data.planepos[1].y = -.075f;
>  		test_multi_plane_rotation(&data, 0);
>  	}
>  
> @@ -866,11 +866,11 @@ igt_main
>  		igt_require(gen >= 9);
>  		cleanup_crtc(&data);
>  		data.planepos[0].origo = p_bottom | p_left;
> -		data.planepos[0].x = -.05f;
> -		data.planepos[0].y = -.20f;
> +		data.planepos[0].x = -.025f;
> +		data.planepos[0].y = -.10f;
>  		data.planepos[1].origo = p_bottom | p_right;
> -		data.planepos[1].x = -.15f;
> -		data.planepos[1].y = -.20f;
> +		data.planepos[1].x = -.075f;
> +		data.planepos[1].y = -.10f;
>  		test_multi_plane_rotation(&data, 0);
>  	}
>