[igt-dev] [PATCH 02/10] lib/intel_batchbuffer: Add blitter copy using XY_SRC_COPY_BLT
Ville Syrjälä
ville.syrjala at linux.intel.com
Wed Dec 18 15:13:28 UTC 2019
On Tue, Dec 17, 2019 at 09:59:17PM -0800, Vanshidhar Konda wrote:
> Add a method that uses the XY_SRC_COPY_BLT instruction for copying
> buffers using the blitter engine.
>
> Signed-off-by: Vanshidhar Konda <vanshidhar.r.konda at intel.com>
> ---
> lib/intel_batchbuffer.c | 183 ++++++++++++++++++++++++++++++++++++++++
> lib/intel_batchbuffer.h | 21 +++++
> 2 files changed, 204 insertions(+)
>
> diff --git a/lib/intel_batchbuffer.c b/lib/intel_batchbuffer.c
> index 51aae4dc..1352aa95 100644
> --- a/lib/intel_batchbuffer.c
> +++ b/lib/intel_batchbuffer.c
> @@ -46,6 +46,12 @@
>
> #include <i915_drm.h>
>
> +#define MI_FLUSH_DW (0x26 << 23)
> +
> +#define BCS_SWCTRL 0x22200
> +#define BCS_SRC_Y (1 << 0)
> +#define BCS_DST_Y (1 << 1)
> +
> /**
> * SECTION:intel_batchbuffer
> * @short_description: Batchbuffer and blitter support
> @@ -661,6 +667,183 @@ static void exec_blit(int fd,
> gem_execbuf(fd, &exec);
> }
>
> +static uint32_t src_copy_dword0(uint32_t src_tiling, uint32_t dst_tiling,
> + uint32_t bpp, uint32_t device_gen)
> +{
> + uint32_t dword0 = 0;
> +
> + dword0 |= XY_SRC_COPY_BLT_CMD;
> + if (bpp == 32)
> + dword0 |= XY_SRC_COPY_BLT_WRITE_RGB |
> + XY_SRC_COPY_BLT_WRITE_ALPHA;
> +
> + if (device_gen >= 4 && src_tiling)
> + dword0 |= XY_SRC_COPY_BLT_SRC_TILED;
> + if (device_gen >= 4 && dst_tiling)
> + dword0 |= XY_SRC_COPY_BLT_DST_TILED;
> +
> + return dword0;
> +}
> +
> +static uint32_t src_copy_dword1(uint32_t dst_pitch, uint32_t bpp)
> +{
> + uint32_t dword1 = 0;
> +
> + switch (bpp) {
> + case 8:
> + break;
> + case 16:
> + dword1 |= (1 << 24); /* Only support 565 color */
> + break;
> + case 32:
> + dword1 |= (3 << 24);
> + break;
> + default:
> + igt_assert(0);
> + }
> +
> + dword1 |= 0xcc << 16;
> + dword1 |= dst_pitch;
> +
> + return dword1;
> +}
> +/**
> + * igt_blitter_src_copy__raw:
> + * @fd: file descriptor of the i915 driver
> + * @src_handle: GEM handle of the source buffer
> + * @src_delta: offset into the source GEM bo, in bytes
> + * @src_stride: Stride (in bytes) of the source buffer
> + * @src_tiling: Tiling mode of the source buffer
> + * @src_x: X coordinate of the source region to copy
> + * @src_y: Y coordinate of the source region to copy
> + * @width: Width of the region to copy
> + * @height: Height of the region to copy
> + * @bpp: source and destination bits per pixel
> + * @dst_handle: GEM handle of the destination buffer
> + * @dst_delta: offset into the destination GEM bo, in bytes
> + * @dst_stride: Stride (in bytes) of the destination buffer
> + * @dst_tiling: Tiling mode of the destination buffer
> + * @dst_x: X coordinate of destination
> + * @dst_y: Y coordinate of destination
> + *
> + */
> +void igt_blitter_src_copy__raw(int fd,
> + /* src */
> + uint32_t src_handle,
> + unsigned int src_delta,
> + unsigned int src_stride,
> + unsigned int src_tiling,
> + unsigned int src_x, unsigned src_y,
Inconsistent unsigned int vs. unsigned
> +
> + /* size */
> + unsigned int width, unsigned int height,
> +
> + /* bpp */
> + int bpp,
> +
> + /* dst */
> + uint32_t dst_handle,
> + unsigned dst_delta,
> + unsigned int dst_stride,
> + unsigned int dst_tiling,
> + unsigned int dst_x, unsigned dst_y)
> +{
> + uint32_t batch[32];
> + struct drm_i915_gem_exec_object2 objs[3];
> + struct drm_i915_gem_relocation_entry relocs[2];
> + uint32_t batch_handle;
> + uint32_t src_pitch, dst_pitch;
> + uint32_t dst_reloc_offset, src_reloc_offset;
> + int i = 0;
> + uint32_t gen = intel_gen(intel_get_drm_devid(fd));
> + const bool has_64b_reloc = gen >= 8;
> +
> + memset(batch, 0, sizeof(batch));
> +
> + igt_assert((src_tiling == I915_TILING_NONE) ||
> + (src_tiling == I915_TILING_X) ||
> + (src_tiling == I915_TILING_Y));
> + igt_assert((dst_tiling == I915_TILING_NONE) ||
> + (dst_tiling == I915_TILING_X) ||
> + (dst_tiling == I915_TILING_Y));
> +
> + src_pitch = fast_copy_pitch(src_stride, src_tiling);
> + dst_pitch = fast_copy_pitch(dst_stride, dst_tiling);
I believe those do the wrong thing for pre-gen4 tiling.
I also wonder how many implementations of this we already have in igt.
I suspect the answer is more than two. Maybe there's a way to reduce the
duplication a bit?
> +
> + CHECK_RANGE(src_x); CHECK_RANGE(src_y);
> + CHECK_RANGE(dst_x); CHECK_RANGE(dst_y);
> + CHECK_RANGE(width); CHECK_RANGE(height);
> + CHECK_RANGE(src_x + width); CHECK_RANGE(src_y + height);
> + CHECK_RANGE(dst_x + width); CHECK_RANGE(dst_y + height);
> + CHECK_RANGE(src_pitch); CHECK_RANGE(dst_pitch);
> +
> + if ((src_tiling | dst_tiling) >= I915_TILING_Y) {
> + unsigned int mask;
> +
> + batch[i++] = MI_LOAD_REGISTER_IMM;
> + batch[i++] = BCS_SWCTRL;
> +
> + mask = (BCS_SRC_Y | BCS_DST_Y) << 16;
> + if (src_tiling == I915_TILING_Y)
> + mask |= BCS_SRC_Y;
> + if (dst_tiling == I915_TILING_Y)
> + mask |= BCS_DST_Y;
> + batch[i++] = mask;
> + }
> +
> + batch[i] = src_copy_dword0(src_tiling, dst_tiling, bpp, gen);
> + batch[i++] |= 6 + 2 * has_64b_reloc;
> + batch[i++] = src_copy_dword1(dst_pitch, bpp);
> + batch[i++] = (dst_y << 16) | dst_x; /* dst x1,y1 */
> + batch[i++] = ((dst_y + height) << 16) | (dst_x + width); /* dst x2,y2 */
> + dst_reloc_offset = i;
> + batch[i++] = dst_delta; /* dst address lower bits */
> + batch[i++] = 0; /* dst address upper bits */
> + batch[i++] = (src_y << 16) | src_x; /* src x1,y1 */
> + batch[i++] = src_pitch;
> + src_reloc_offset = i;
> + batch[i++] = src_delta; /* src address lower bits */
> + batch[i++] = 0; /* src address upper bits */
> +
> + if ((src_tiling | dst_tiling) >= I915_TILING_Y) {
> + igt_assert(gen >= 6);
> + batch[i++] = MI_FLUSH_DW | 2;
> + batch[i++] = 0;
> + batch[i++] = 0;
> + batch[i++] = 0;
> +
> + batch[i++] = MI_LOAD_REGISTER_IMM;
> + batch[i++] = BCS_SWCTRL;
> + batch[i++] = (BCS_SRC_Y | BCS_DST_Y) << 16;
> + }
> +
> + batch[i++] = MI_BATCH_BUFFER_END;
> + batch[i++] = MI_NOOP;
> +
> + igt_assert(i <= ARRAY_SIZE(batch));
> +
> + batch_handle = gem_create(fd, 4096);
> + gem_write(fd, batch_handle, 0, batch, sizeof(batch));
> +
> + fill_relocation(&relocs[0], dst_handle, dst_delta, dst_reloc_offset,
> + I915_GEM_DOMAIN_RENDER, I915_GEM_DOMAIN_RENDER);
> + fill_relocation(&relocs[1], src_handle, src_delta, src_reloc_offset,
> + I915_GEM_DOMAIN_RENDER, 0);
> +
> + fill_object(&objs[0], dst_handle, NULL, 0);
> + fill_object(&objs[1], src_handle, NULL, 0);
> + fill_object(&objs[2], batch_handle, relocs, 2);
> +
> + if (dst_tiling)
> + objs[0].flags |= EXEC_OBJECT_NEEDS_FENCE;
> + if (src_tiling)
> + objs[1].flags |= EXEC_OBJECT_NEEDS_FENCE;
> +
> + exec_blit(fd, objs, 3, ARRAY_SIZE(batch));
> +
> + gem_close(fd, batch_handle);
> +}
> +
> /**
> * igt_blitter_fast_copy__raw:
> * @fd: file descriptor of the i915 driver
> diff --git a/lib/intel_batchbuffer.h b/lib/intel_batchbuffer.h
> index 37e3affe..4820cebb 100644
> --- a/lib/intel_batchbuffer.h
> +++ b/lib/intel_batchbuffer.h
> @@ -252,6 +252,27 @@ struct igt_buf {
> unsigned igt_buf_width(const struct igt_buf *buf);
> unsigned igt_buf_height(const struct igt_buf *buf);
>
> +void igt_blitter_src_copy__raw(int fd,
> + /* src */
> + uint32_t src_handle,
> + unsigned int src_delta,
> + unsigned int src_stride,
> + unsigned int src_tiling,
> + unsigned int src_x, unsigned src_y,
> +
> + /* size */
> + unsigned int width, unsigned int height,
> +
> + /* bpp */
> + int bpp,
> +
> + /* dst */
> + uint32_t dst_handle,
> + unsigned int dst_delta,
> + unsigned int dst_stride,
> + unsigned int dst_tiling,
> + unsigned int dst_x, unsigned dst_y);
> +
> void igt_blitter_fast_copy(struct intel_batchbuffer *batch,
> const struct igt_buf *src, unsigned src_delta,
> unsigned src_x, unsigned src_y,
> --
> 2.24.0
>
> _______________________________________________
> igt-dev mailing list
> igt-dev at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/igt-dev
--
Ville Syrjälä
Intel
More information about the igt-dev
mailing list