[igt-dev] [PATCH i-g-t 5/7] tests/kms_hdr: Add static toggle SDR->HDR mode subtests
Swati Sharma
swati2.sharma at intel.com
Tue Dec 31 13:21:56 UTC 2019
From: Nicholas Kazlauskas <nicholas.kazlauskas at amd.com>
Add subtests to toggle between SDR to HDR mode with suspend
and dpms scenarios. Tests are made compatible for both amd
and intel drivers.
Signed-off-by: Swati Sharma <swati2.sharma at intel.com>
---
tests/kms_hdr.c | 167 ++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 167 insertions(+)
diff --git a/tests/kms_hdr.c b/tests/kms_hdr.c
index 212d246d..dfd377b5 100644
--- a/tests/kms_hdr.c
+++ b/tests/kms_hdr.c
@@ -27,6 +27,18 @@
IGT_TEST_DESCRIPTION("Test HDR metadata interfaces and bpc switch");
+/* DRM HDR definitions. Not in the UAPI header, unfortunately. */
+
+enum hdmi_metadata_type {
+ HDMI_STATIC_METADATA_TYPE1 = 1,
+};
+
+enum hdmi_eotf {
+ HDMI_EOTF_TRADITIONAL_GAMMA_SDR,
+ HDMI_EOTF_TRADITIONAL_GAMMA_HDR,
+ HDMI_EOTF_SMPTE_ST2084,
+};
+
/* Test flags. */
enum {
TEST_NONE = 0,
@@ -264,6 +276,154 @@ static void test_bpc_switch(data_t *data, uint32_t flags)
igt_require_f(valid_tests, "No connector found with MAX BPC connector property\n");
}
+/* Sets the HDR output metadata prop. */
+static void set_hdr_output_metadata(data_t *data,
+ struct hdr_output_metadata const *meta)
+{
+ igt_output_replace_prop_blob(data->output,
+ IGT_CONNECTOR_HDR_OUTPUT_METADATA, meta,
+ meta ? sizeof(*meta) : 0);
+}
+
+/* Converts a double to 861-G spec FP format. */
+static uint16_t calc_hdr_float(double val)
+{
+ return (uint16_t)(val * 50000.0);
+}
+
+/* Fills some test values for ST2048 HDR output metadata.
+ *
+ * Note: there isn't really a standard for what the metadata is supposed
+ * to do on the display side of things. The display is free to ignore it
+ * and clip the output, use it to help tonemap to the content range,
+ * or do anything they want, really.
+ */
+static void fill_hdr_output_metadata_st2048(struct hdr_output_metadata *meta)
+{
+ memset(meta, 0, sizeof(*meta));
+
+ meta->metadata_type = HDMI_STATIC_METADATA_TYPE1;
+ meta->hdmi_metadata_type1.eotf = HDMI_EOTF_SMPTE_ST2084;
+
+ /* Rec. 2020 */
+ meta->hdmi_metadata_type1.display_primaries[0].x =
+ calc_hdr_float(0.708); /* Red */
+ meta->hdmi_metadata_type1.display_primaries[0].y =
+ calc_hdr_float(0.292);
+ meta->hdmi_metadata_type1.display_primaries[1].x =
+ calc_hdr_float(0.170); /* Green */
+ meta->hdmi_metadata_type1.display_primaries[1].y =
+ calc_hdr_float(0.797);
+ meta->hdmi_metadata_type1.display_primaries[2].x =
+ calc_hdr_float(0.131); /* Blue */
+ meta->hdmi_metadata_type1.display_primaries[2].y =
+ calc_hdr_float(0.046);
+ meta->hdmi_metadata_type1.white_point.x = calc_hdr_float(0.3127);
+ meta->hdmi_metadata_type1.white_point.y = calc_hdr_float(0.3290);
+
+ meta->hdmi_metadata_type1.max_display_mastering_luminance =
+ 1000; /* 1000 nits */
+ meta->hdmi_metadata_type1.min_display_mastering_luminance =
+ 500; /* 0.05 nits */
+ meta->hdmi_metadata_type1.max_fall = 1000; /* 1000 nits */
+ meta->hdmi_metadata_type1.max_cll = 500; /* 500 nits */
+}
+
+static void test_static_toggle(data_t *data, igt_output_t *output,
+ uint32_t flags)
+{
+ igt_display_t *display = &data->display;
+ struct hdr_output_metadata hdr;
+ igt_crc_t ref_crc, new_crc;
+ enum pipe pipe;
+ igt_fb_t afb;
+ int afb_id;
+
+ for_each_pipe(display, pipe) {
+ if (!igt_pipe_connector_valid(pipe, output))
+ continue;
+
+ if (!igt_pipe_is_free(display, pipe))
+ continue;
+
+ prepare_test(data, output, pipe);
+
+ /* 10-bit formats are slow, so limit the size. */
+ afb_id = igt_create_fb(data->fd, 512, 512, DRM_FORMAT_XRGB2101010, 0, &afb);
+ igt_assert(afb_id);
+
+ draw_hdr_pattern(&afb);
+
+ fill_hdr_output_metadata_st2048(&hdr);
+
+ /* Start with no metadata. */
+ igt_plane_set_fb(data->primary, &afb);
+ igt_plane_set_size(data->primary, data->w, data->h);
+ set_hdr_output_metadata(data, NULL);
+ igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC, 8);
+ igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+ if (is_amdgpu_device(data->fd))
+ assert_output_bpc(data, 8);
+
+ /* Apply HDR metadata and 10bpc. We expect a modeset for entering. */
+ set_hdr_output_metadata(data, &hdr);
+ igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC, 10);
+ igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+ if (is_amdgpu_device(data->fd))
+ assert_output_bpc(data, 10);
+
+ /* Verify that the CRC are equal after DPMS or suspend. */
+ igt_pipe_crc_collect_crc(data->pipe_crc, &ref_crc);
+ test_cycle_flags(data, flags);
+ igt_pipe_crc_collect_crc(data->pipe_crc, &new_crc);
+
+ /* Disable HDR metadata and drop back to 8bpc. We expect a modeset for exiting. */
+ set_hdr_output_metadata(data, NULL);
+ igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC, 8);
+ igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+ if (is_amdgpu_device(data->fd))
+ assert_output_bpc(data, 8);
+
+ igt_assert_crc_equal(&ref_crc, &new_crc);
+
+ test_fini(data);
+ igt_remove_fb(data->fd, &afb);
+
+ break;
+ }
+}
+
+/* Returns true if an output supports hdr metadata property */
+static bool has_hdr(igt_output_t *output)
+{
+ return igt_output_has_prop(output, IGT_CONNECTOR_HDR_OUTPUT_METADATA);
+}
+
+static void test_hdr(data_t *data, const char *test_name, uint32_t flags)
+{
+ igt_output_t *output;
+ int valid_tests = 0;
+
+ for_each_connected_output(&data->display, output) {
+ /* To test HDR, 10 bpc is required, so we need to
+ * set MAX_BPC property to 10bpc prior to setting
+ * HDR metadata property. Therefore, checking.
+ */
+ if (!has_max_bpc(output))
+ continue;
+
+ if (!has_hdr(output))
+ continue;
+
+ igt_info("HDR %s test execution on %s\n", test_name, output->name);
+ if (flags & TEST_NONE || flags & TEST_DPMS || flags & TEST_SUSPEND)
+ test_static_toggle(data, output, flags);
+ valid_tests++;
+ }
+
+ igt_require_f(valid_tests, "No connector found with HDR metadata/MAX BPC connector property\n");
+}
+
igt_main
{
data_t data = { 0 };
@@ -286,6 +446,13 @@ igt_main
igt_describe("Tests bpc switch with suspend");
igt_subtest("bpc-switch-suspend") test_bpc_switch(&data, TEST_SUSPEND);
+ igt_describe("Tests entering and exiting HDR mode");
+ igt_subtest("static-toggle") test_hdr(&data, "static-toggle", TEST_NONE);
+ igt_describe("Tests static toggle with dpms");
+ igt_subtest("static-toggle-dpms") test_hdr(&data, "static-toggle-dpms", TEST_DPMS);
+ igt_describe("Tests static toggle with suspend");
+ igt_subtest("static-toggle-suspend") test_hdr(&data, "static-toggle-suspend", TEST_SUSPEND);
+
igt_fixture {
igt_display_fini(&data.display);
}
--
2.24.1
More information about the igt-dev
mailing list