[igt-dev] [PATCH i-g-t v2 9/9] test: Add PSR2 selective update tests
Dhinakaran Pandiyan
dhinakaran.pandiyan at intel.com
Fri Jan 11 23:15:01 UTC 2019
On Thu, 2019-01-03 at 06:36 -0800, José Roberto de Souza wrote:
> This tests checks if hardware is able to do selective update when
> screen changes.
> PSR2 don't trigger interruptions and the 'PSR2 SU status' register
> is not kept loaded all the times, so it is necessary keep polling
> PSR status debugfs until those values are loaded.
Does this mean flipping once while polling SU status registers is not
sufficient?
> When loaded it is compared with the expected value, if matches
> the polling is stopped and the test passed otherwise it will
> wait until fail_timerfd to expire to fail the test.
This patch warrants some explanation about the timeouts used and how
they were selected.
>
> v2: Using new SU blocks debugfs output
>
> Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
> Signed-off-by: José Roberto de Souza <jose.souza at intel.com>
> ---
> lib/igt_psr.c | 23 +++
> lib/igt_psr.h | 1 +
> tests/Makefile.sources | 1 +
> tests/kms_psr2_su.c | 362
> +++++++++++++++++++++++++++++++++++++++++
> tests/meson.build | 1 +
> 5 files changed, 388 insertions(+)
> create mode 100644 tests/kms_psr2_su.c
>
> diff --git a/lib/igt_psr.c b/lib/igt_psr.c
> index 0f4b2e23..a8b9e4ce 100644
> --- a/lib/igt_psr.c
> +++ b/lib/igt_psr.c
> @@ -234,3 +234,26 @@ bool psr2_wait_update(int debugfs_fd)
> {
> return igt_wait(psr2_status_update(debugfs_fd), 40, 10);
> }
> +
> +#define PSR2_SU_BLOCK_STR_LOOKUP "PSR2 SU blocks:\n0\t"
> +
> +bool psr2_read_last_num_su_blocks_val(int debugfs_fd, uint16_t
> *num_su_blocks)
> +{
> + char buf[PSR_STATUS_MAX_LEN];
> + char *str;
> + int ret;
> +
> + ret = igt_debugfs_simple_read(debugfs_fd,
> "i915_edp_psr_status", buf,
> + sizeof(buf));
> + if (ret < 0)
> + return false;
> +
> + str = strstr(buf, PSR2_SU_BLOCK_STR_LOOKUP);
> + if (!str)
> + return false;
> +
> + str = &str[strlen(PSR2_SU_BLOCK_STR_LOOKUP)];
> + *num_su_blocks = (uint16_t)strtol(str, NULL, 10);
> +
> + return true;
> +}
> diff --git a/lib/igt_psr.h b/lib/igt_psr.h
> index 2b8d1a90..349eb0c2 100644
> --- a/lib/igt_psr.h
> +++ b/lib/igt_psr.h
> @@ -41,5 +41,6 @@ bool psr2_wait_update(int debugfs_fd);
> bool psr2_enable(int debugfs_fd);
> bool psr2_disable(int debugfs_fd);
> bool psr2_sink_support(int debugfs_fd);
> +bool psr2_read_last_num_su_blocks_val(int debugfs_fd, uint16_t
> *num_su_blocks);
>
> #endif
> diff --git a/tests/Makefile.sources b/tests/Makefile.sources
> index eedde1e8..3c79eec0 100644
> --- a/tests/Makefile.sources
> +++ b/tests/Makefile.sources
> @@ -78,6 +78,7 @@ TESTS_progs = \
> kms_plane_scaling \
> kms_properties \
> kms_psr \
> + kms_psr2_su \
> kms_pwrite_crc \
> kms_rmfb \
> kms_rotation_crc \
> diff --git a/tests/kms_psr2_su.c b/tests/kms_psr2_su.c
> new file mode 100644
> index 00000000..67c02f25
> --- /dev/null
> +++ b/tests/kms_psr2_su.c
> @@ -0,0 +1,362 @@
> +/*
> + * Copyright © 2018 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person
> obtaining a
> + * copy of this software and associated documentation files (the
> "Software"),
> + * to deal in the Software without restriction, including without
> limitation
> + * the rights to use, copy, modify, merge, publish, distribute,
> sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom
> the
> + * Software is furnished to do so, subject to the following
> conditions:
> + *
> + * The above copyright notice and this permission notice (including
> the next
> + * paragraph) shall be included in all copies or substantial
> portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
> MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO
> EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES
> OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> OTHER DEALINGS
> + * IN THE SOFTWARE.
> + *
> + */
> +
> +#include "igt.h"
> +#include "igt_sysfs.h"
> +#include "igt_psr.h"
> +#include <errno.h>
> +#include <poll.h>
> +#include <pthread.h>
> +#include <stdbool.h>
> +#include <stdio.h>
> +#include <string.h>
> +#include <sys/timerfd.h>
> +#include "intel_bufmgr.h"
> +
> +IGT_TEST_DESCRIPTION("Test PSR2 selective update");
> +
> +#define SQUARE_SIZE 100
> +
> +enum operations {
> + PAGE_FLIP,
> + FRONTBUFFER,
> + LAST
> +};
> +
> +static const char *op_str(enum operations op)
> +{
> + static const char * const name[] = {
> + [PAGE_FLIP] = "page_flip",
> + [FRONTBUFFER] = "frontbuffer"
> + };
> +
> + return name[op];
> +}
> +
> +typedef struct {
> + struct igt_fb fb[2];
> + struct pollfd pollfds[2];
> + pthread_t thread_id;
> + int drm_fd;
> + int debugfs_fd;
> + int flip_timerfd;
> + int fail_timerfd;
> + uint32_t changes;
> + volatile bool run;
> + volatile bool sucess;
> +
> + enum operations op;
> + uint32_t devid;
> + uint32_t crtc_id;
> + igt_display_t display;
> + drm_intel_bufmgr *bufmgr;
> + int mod_size;
> + int mod_stride;
> + drmModeModeInfo *mode;
> + igt_output_t *output;
> +} data_t;
> +
> +static void setup_output(data_t *data)
> +{
> + igt_display_t *display = &data->display;
> + igt_output_t *output;
> + enum pipe pipe;
> +
> + for_each_pipe_with_valid_output(display, pipe, output) {
> + drmModeConnectorPtr c = output->config.connector;
> +
> + if (c->connector_type != DRM_MODE_CONNECTOR_eDP)
> + continue;
> +
> + igt_output_set_pipe(output, pipe);
> + data->crtc_id = output->config.crtc->crtc_id;
> + data->output = output;
> + data->mode = igt_output_get_mode(output);
> +
> + return;
> + }
> +}
> +
> +static void display_init(data_t *data)
> +{
> + igt_display_require(&data->display, data->drm_fd);
> + setup_output(data);
> +}
> +
> +static void display_fini(data_t *data)
> +{
> + igt_display_fini(&data->display);
> +}
> +
> +static void *debugfs_thread(void *ptr)
> +{
> + data_t *data = ptr;
> + uint16_t expected_num_su_blocks;
> +
> + /* each selective update block is 4 lines tall */
> + expected_num_su_blocks = SQUARE_SIZE / 4;
> + expected_num_su_blocks += SQUARE_SIZE % 4 ? 1 : 0;
> +
> + while (data->run) {
> + uint16_t num_su_blocks;
> + bool r;
> +
> + r = psr2_read_last_num_su_blocks_val(data->debugfs_fd,
> + &num_su_blocks);
> + if (r && num_su_blocks == expected_num_su_blocks) {
> + data->run = false;
> + data->sucess = true;
> + break;
> + }
> +
> + usleep(1);
> + }
> +
What happens if you start this thread and then flip just once? Do you
see the expected block count in debugfs at some instance after the
flip?
> + return NULL;
> +}
> +
> +static void prepare(data_t *data)
> +{
> + struct itimerspec interval;
> + igt_plane_t *primary;
> + int r;
> +
> + /* all green frame */
> + igt_create_color_fb(data->drm_fd,
> + data->mode->hdisplay, data->mode->vdisplay,
> + DRM_FORMAT_XRGB8888,
> + LOCAL_DRM_FORMAT_MOD_NONE,
> + 0.0, 1.0, 0.0,
> + &data->fb[0]);
> +
> + if (data->op == PAGE_FLIP) {
> + cairo_t *cr;
> +
> + igt_create_color_fb(data->drm_fd,
> + data->mode->hdisplay, data->mode-
> >vdisplay,
> + DRM_FORMAT_XRGB8888,
> + LOCAL_DRM_FORMAT_MOD_NONE,
> + 0.0, 1.0, 0.0,
> + &data->fb[1]);
> +
> + cr = igt_get_cairo_ctx(data->drm_fd, &data->fb[1]);
> + /* a white square */
> + igt_paint_color_alpha(cr, 0, 0, SQUARE_SIZE,
> SQUARE_SIZE,
> + 1.0, 1.0, 1.0, 1.0);
> + igt_put_cairo_ctx(data->drm_fd, &data->fb[1], cr);
> + }
> +
> + primary = igt_output_get_plane_type(data->output,
> + DRM_PLANE_TYPE_PRIMARY);
> + igt_plane_set_fb(primary, NULL);
> +
> + igt_display_commit(&data->display);
> + igt_plane_set_fb(primary, &data->fb[0]);
> + igt_display_commit(&data->display);
> +
> + igt_assert(psr2_wait_deep_sleep(data->debugfs_fd));
> +
> + data->run = true;
> + data->sucess = false;
> + data->changes = 0;
> +
> + r = pthread_create(&data->thread_id, NULL, debugfs_thread,
> data);
> + if (r)
> + igt_warn("Error starting thread: %i\n", r);
> +
> + interval.it_value.tv_nsec = 0;
> + interval.it_value.tv_sec = 3;
> + interval.it_interval.tv_nsec = interval.it_value.tv_nsec;
> + interval.it_interval.tv_sec = interval.it_value.tv_sec;
> + r = timerfd_settime(data->fail_timerfd, 0, &interval, NULL);
> + igt_require_f(r != -1, "Error setting timerfd\n");
> +}
> +
> +static void update_screen(data_t *data)
> +{
> + data->changes++;
> +
> + switch (data->op) {
> + case PAGE_FLIP: {
> + igt_plane_t *primary;
> +
> + primary = igt_output_get_plane_type(data->output,
> + DRM_PLANE_TYPE_PRIM
> ARY);
> +
> + igt_plane_set_fb(primary, &data->fb[data->changes &
> 1]);
> + igt_display_commit(&data->display);
> + break;
> + }
> + case FRONTBUFFER: {
> + drmModeClip clip;
> + cairo_t *cr;
> + int r;
> +
> + clip.x1 = clip.y1 = 0;
> + clip.x2 = clip.y2 = SQUARE_SIZE;
> +
> + cr = igt_get_cairo_ctx(data->drm_fd, &data->fb[0]);
> +
> + if (data->changes & 1) {
> + /* go back to all green frame with with square
> */
> + igt_paint_color_alpha(cr, 0, 0, SQUARE_SIZE,
> + SQUARE_SIZE, 1.0, 1.0,
> 1.0, 1.0);
> + } else {
> + /* go back to all green frame */
> + igt_paint_color_alpha(cr, 0, 0, SQUARE_SIZE,
> + SQUARE_SIZE, 0, 1.0, 0,
> 1.0);
> + }
> +
> + r = drmModeDirtyFB(data->drm_fd, data->fb[0].fb_id,
> &clip, 1);
> + igt_assert(r == 0 || r == -ENOSYS);
> + break;
> + }
> + default:
> + igt_assert_f(data->op, "Operation not handled\n");
> + }
> +}
> +
> +static void run(data_t *data)
> +{
> + while (data->run) {
> + uint64_t exp;
> + int r;
> +
> + r = poll(data->pollfds,
> + sizeof(data->pollfds) / sizeof(data-
> >pollfds[0]), -1);
> + if (r < 0)
> + break;
> +
> + /* flip_timerfd timeout */
> + if (data->pollfds[0].revents & POLLIN) {
> + r = read(data->pollfds[0].fd, &exp,
> sizeof(exp));
> +
> + if (r != sizeof(uint64_t)) {
> + igt_warn("read a not expected number of
> bytes from flip_timerfd: %i\n", r);
> + } else if (exp)
> + update_screen(data);
> + }
> +
> + /* fail_timerfd timeout */
Wouldn't it be simpler to flip a fixed number of times?
> + if (data->pollfds[1].revents & POLLIN) {
> + r = read(data->pollfds[1].fd, &exp,
> sizeof(exp));
> +
> + if (r != sizeof(uint64_t)) {
> + igt_warn("read a not expected number of
> bytes from fail_timerfd: %i\n", r);
> + } else if (exp)
> + break;
> + }
> + }
> +
> + data->run = false;
> + pthread_join(data->thread_id, NULL);
> +
> + igt_debug("Changes: %u\n", data->changes);
> + igt_assert(data->sucess);
> +}
> +
> +static void cleanup(data_t *data)
> +{
> + igt_plane_t *primary;
> +
> + primary = igt_output_get_plane_type(data->output,
> + DRM_PLANE_TYPE_PRIMARY);
> + igt_plane_set_fb(primary, NULL);
> + igt_display_commit(&data->display);
> +
> + igt_remove_fb(data->drm_fd, &data->fb[0]);
> + if (data->op == PAGE_FLIP)
> + igt_remove_fb(data->drm_fd, &data->fb[1]);
> +}
> +
> +int main(int argc, char *argv[])
> +{
> + data_t data = {};
> + enum operations op;
> +
> + igt_subtest_init_parse_opts(&argc, argv, "", NULL,
> + NULL, NULL, NULL);
> + igt_skip_on_simulation();
> +
> + igt_fixture {
> + struct itimerspec interval;
> + int r;
> +
> + data.drm_fd = drm_open_driver_master(DRIVER_INTEL);
> + data.debugfs_fd = igt_debugfs_dir(data.drm_fd);
> + kmstest_set_vt_graphics_mode();
> + data.devid = intel_get_drm_devid(data.drm_fd);
> +
> + igt_require_f(psr2_sink_support(data.debugfs_fd),
> + "Sink does not support PSR2\n");
> +
> + data.bufmgr = drm_intel_bufmgr_gem_init(data.drm_fd,
> 4096);
> + igt_assert(data.bufmgr);
> + drm_intel_bufmgr_gem_enable_reuse(data.bufmgr);
> +
> + display_init(&data);
> +
> + igt_require(psr2_enable(data.debugfs_fd));
> + igt_require(psr2_wait_deep_sleep(data.debugfs_fd));
> +
> + data.flip_timerfd = timerfd_create(CLOCK_MONOTONIC,
> + TFD_NONBLOCK);
> + igt_require(data.flip_timerfd != -1);
> + interval.it_value.tv_nsec = NSEC_PER_SEC / 15;
What's the rationale for this number?
> + interval.it_value.tv_sec = 0;
> + interval.it_interval.tv_nsec =
> interval.it_value.tv_nsec;
> + interval.it_interval.tv_sec = interval.it_value.tv_sec;
> + r = timerfd_settime(data.flip_timerfd, 0, &interval,
> NULL);
> + igt_require_f(r != -1, "Error setting timerfd\n");
> +
> + data.fail_timerfd = timerfd_create(CLOCK_MONOTONIC,
> + TFD_NONBLOCK);
> + igt_require(data.fail_timerfd != -1);
> +
> + data.pollfds[0].fd = data.flip_timerfd;
> + data.pollfds[0].events = POLLIN;
> + data.pollfds[0].revents = 0;
> +
> + data.pollfds[1].fd = data.fail_timerfd;
> + data.pollfds[1].events = POLLIN;
> + data.pollfds[1].revents = 0;
> + }
> +
> + for (op = PAGE_FLIP; op < LAST; op++) {
> + igt_subtest_f("%s", op_str(op)) {
> + data.op = op;
> + prepare(&data);
> + run(&data);
> + cleanup(&data);
> + }
> + }
> +
> + igt_fixture {
> + close(data.debugfs_fd);
> + drm_intel_bufmgr_destroy(data.bufmgr);
> + display_fini(&data);
> + }
> +
> + igt_exit();
> +}
> diff --git a/tests/meson.build b/tests/meson.build
> index b8a6e61b..c557333c 100644
> --- a/tests/meson.build
> +++ b/tests/meson.build
> @@ -49,6 +49,7 @@ test_progs = [
> 'kms_plane_scaling',
> 'kms_properties',
> 'kms_psr',
> + 'kms_psr2_su',
> 'kms_pwrite_crc',
> 'kms_rmfb',
> 'kms_rotation_crc',
More information about the igt-dev
mailing list