[igt-dev] [PATCH i-g-t 10/10] tests/psr: Add the same test coverage that we have for PSR1 to PSR2
Dhinakaran Pandiyan
dhinakaran.pandiyan at intel.com
Thu Jan 17 21:51:04 UTC 2019
On Thu, 2019-01-17 at 13:43 -0800, Souza, Jose wrote:
> On Tue, 2019-01-15 at 22:44 -0800, Dhinakaran Pandiyan wrote:
> > On Fri, 2019-01-11 at 17:46 -0800, José Roberto de Souza wrote:
> > > The main tests for PSR1 check if hardware tracking is detecting
> > > changes in planes when modifing it in different ways and now
> > > those tests will also run for PSR2 if supported by source and
> > > sink.
> > >
> > > Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
> > > Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
> > > Signed-off-by: José Roberto de Souza <jose.souza at intel.com>
> > > ---
> > > tests/kms_psr.c | 119
> > > ++++++++++++++++++++++++++++++++++++++++++++
> > > ----
> > > 1 file changed, 110 insertions(+), 9 deletions(-)
> > >
> > > diff --git a/tests/kms_psr.c b/tests/kms_psr.c
> > > index 8f2ef89c..b2202cd3 100644
> > > --- a/tests/kms_psr.c
> > > +++ b/tests/kms_psr.c
> > > @@ -61,6 +61,7 @@ typedef struct {
> > > int debugfs_fd;
> > > enum operations op;
> > > int test_plane_id;
> > > + enum psr_mode op_psr_mode;
> > > uint32_t devid;
> > > uint32_t crtc_id;
> > > igt_display_t display;
> > > @@ -72,6 +73,7 @@ typedef struct {
> > > drmModeModeInfo *mode;
> > > igt_output_t *output;
> > > bool with_psr_disabled;
> > > + bool supports_psr2;
> > > } data_t;
> > >
> > > static void create_cursor_fb(data_t *data)
> > > @@ -190,10 +192,10 @@ static void fill_render(data_t *data,
> > > uint32_t
> > > handle, unsigned char color)
> > > gem_bo_busy(data->drm_fd, handle);
> > > }
> > >
> > > -static bool sink_support(data_t *data)
> > > +static bool sink_support(data_t *data, enum psr_mode mode)
> > > {
> > > return data->with_psr_disabled ||
> > > - psr_sink_support(data->debugfs_fd, PSR_MODE_1);
> > > + psr_sink_support(data->debugfs_fd, mode);
> > > }
> > >
> > > static bool psr_wait_entry_if_enabled(data_t *data)
> > > @@ -201,7 +203,23 @@ static bool psr_wait_entry_if_enabled(data_t
> > > *data)
> > > if (data->with_psr_disabled)
> > > return true;
> > >
> > > - return psr_wait_entry(data->debugfs_fd, PSR_MODE_1);
> > > + return psr_wait_entry(data->debugfs_fd, data->op_psr_mode);
> > > +}
> > > +
> > > +static bool psr_wait_update_if_enabled(data_t *data)
> > > +{
> > > + if (data->with_psr_disabled)
> > > + return true;
> > > +
> > > + return psr_wait_update(data->debugfs_fd, data->op_psr_mode);
> > > +}
> > > +
> > > +static bool psr_enable_if_enabled(data_t *data)
> >
> > This function name is quite confusing. What do you think of using
> > macros like this
> >
> > #define PSR_WAIT_ENTRY(data, mode)
> > return data->with_psr_disabled || psr_wait_entry(data-
> > > debugfs_fd, mode);
> >
> > ...
>
>
> I'm happy with both approaches but I guess we can change that in a
> patch on top of this one.
>
> >
> >
> > > +{
> > > + if (data->with_psr_disabled)
> > > + return true;
> > > +
> > > + return psr_enable(data->debugfs_fd, data->op_psr_mode);
> > > }
> > >
> > > static inline void manual(const char *expected)
> > > @@ -291,7 +309,7 @@ static void run_test(data_t *data)
> > > expected = "screen GREEN";
> > > break;
> > > }
> > > - igt_assert(psr_wait_update(data->debugfs_fd, PSR_MODE_1));
> > > + igt_assert(psr_wait_update_if_enabled(data));
> > > manual(expected);
> > > }
> > >
> > > @@ -369,6 +387,7 @@ static void setup_test_plane(data_t *data,
> > > int
> > > test_plane)
> > >
> > > static void test_setup(data_t *data)
> > > {
> > > + psr_enable_if_enabled(data);
> > > setup_test_plane(data, data->test_plane_id);
> > > igt_assert(psr_wait_entry_if_enabled(data));
> > > }
> > > @@ -399,7 +418,7 @@ static int opt_handler(int opt, int
> > > opt_index,
> > > void *_data)
> > > int main(int argc, char *argv[])
> > > {
> > > const char *help_str =
> > > - " --no-psr\tRun test without PSR.";
> > > + " --no-psr\tRun test without PSR/PSR2.";
> > > static struct option long_options[] = {
> > > {"no-psr", 0, 0, 'n'},
> > > { 0, 0, 0, 0 }
> > > @@ -417,12 +436,15 @@ int main(int argc, char *argv[])
> > > kmstest_set_vt_graphics_mode();
> > > data.devid = intel_get_drm_devid(data.drm_fd);
> > >
> > > - if (!data.with_psr_disabled)
> > > - psr_enable(data.debugfs_fd, PSR_MODE_1);
> > > -
> > > - igt_require_f(sink_support(&data),
> > > + igt_require_f(sink_support(&data, PSR_MODE_1),
> > > "Sink does not support PSR\n");
> > >
> > > + if (sink_support(&data, PSR_MODE_2)) {
> > > + data.op_psr_mode = PSR_MODE_2;
> > > + psr_enable_if_enabled(&data);
> >
> > There is another enable in test_setup() that the PSR2 subtests
> > call.
> > Why do we need two?
>
> Here I'm enabling by hand to check if source and sink support PSR2 so
> data.supports_psr2 is set with the right value and we skip the PSR2
> tests when not supported.
How do you distinguish that from a true failure where PSR2 should have
got enabled but it doesn't?
>
>
> >
> > > + data.supports_psr2 =
> > > psr_wait_entry_if_enabled(&data);
> > > + }
> > > +
> > > data.bufmgr = drm_intel_bufmgr_gem_init(data.drm_fd,
> > > 4096);
> > > igt_assert(data.bufmgr);
> > > drm_intel_bufmgr_gem_enable_reuse(data.bufmgr);
> > > @@ -431,12 +453,31 @@ int main(int argc, char *argv[])
> > > }
> > >
> > > igt_subtest("basic") {
> > > + data.op_psr_mode = PSR_MODE_1;
> > > + data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
> > > + test_setup(&data);
> > > + test_cleanup(&data);
> > > + }
> >
> > Run this in a loop (PSR_MODE_1...PSR_MODE_2) instead of repeating
> > the
> > same calls?
>
> I think have separated tests is better because CI reports will show
> what version of PSR has a regression, we can run specific tests while
> debuging...
Calling igt_subtest() in a loop should generate separate subtests iiuc.
>
> >
> > > +
> > > + igt_subtest("psr2_basic") {
> > > + igt_require(data.supports_psr2);
> >
> > We don't have to generate this subtest if the sink does not support
> > PSR2. kms_frontbuffer_tracking generates subtests dynamically, we
> > can
> > use the same approach here.
> >
> > > + data.op_psr_mode = PSR_MODE_2;
> > > data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
> > > test_setup(&data);
> > > test_cleanup(&data);
> > > }
> > >
> > > igt_subtest("no_drrs") {
> > > + data.op_psr_mode = PSR_MODE_1;
> > > + data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
> > > + test_setup(&data);
> > > + igt_assert(drrs_disabled(&data));
> > > + test_cleanup(&data);
> > > + }
> > > +
> > > + igt_subtest("psr2_no_drrs") {
> > > + igt_require(data.supports_psr2);
> > > + data.op_psr_mode = PSR_MODE_2;
> > > data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
> > > test_setup(&data);
> > > igt_assert(drrs_disabled(&data));
> > > @@ -445,6 +486,17 @@ int main(int argc, char *argv[])
> > >
> > > for (op = PAGE_FLIP; op <= RENDER; op++) {
> > > igt_subtest_f("primary_%s", op_str(op)) {
> > > + data.op_psr_mode = PSR_MODE_1;
> > > + data.op = op;
> > > + data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
> > > + test_setup(&data);
> > > + run_test(&data);
> > > + test_cleanup(&data);
> > > + }
> > > +
> > > + igt_subtest_f("psr2_primary_%s", op_str(op)) {
> > > + igt_require(data.supports_psr2);
> > > + data.op_psr_mode = PSR_MODE_2;
> > > data.op = op;
> > > data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
> > > test_setup(&data);
> > > @@ -455,6 +507,18 @@ int main(int argc, char *argv[])
> > >
> > > for (op = MMAP_GTT; op <= PLANE_ONOFF; op++) {
> > > igt_subtest_f("sprite_%s", op_str(op)) {
> > > + igt_require(data.supports_psr2);
> > > + data.op_psr_mode = PSR_MODE_1;
> > > + data.op = op;
> > > + data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
> > > + test_setup(&data);
> > > + run_test(&data);
> > > + test_cleanup(&data);
> > > + }
> > > +
> > > + igt_subtest_f("psr2_sprite_%s", op_str(op)) {
> > > + igt_require(data.supports_psr2);
> > > + data.op_psr_mode = PSR_MODE_2;
> > > data.op = op;
> > > data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
> > > test_setup(&data);
> > > @@ -465,6 +529,17 @@ int main(int argc, char *argv[])
> > >
> > > for (op = MMAP_GTT; op <= PLANE_ONOFF; op++) {
> > > igt_subtest_f("cursor_%s", op_str(op)) {
> > > + data.op_psr_mode = PSR_MODE_1;
> > > + data.op = op;
> > > + data.test_plane_id = DRM_PLANE_TYPE_CURSOR;
> > > + test_setup(&data);
> > > + run_test(&data);
> > > + test_cleanup(&data);
> > > + }
> > > +
> > > + igt_subtest_f("psr2_cursor_%s", op_str(op)) {
> > > + igt_require(data.supports_psr2);
> > > + data.op_psr_mode = PSR_MODE_2;
> > > data.op = op;
> > > data.test_plane_id = DRM_PLANE_TYPE_CURSOR;
> > > test_setup(&data);
> > > @@ -474,6 +549,18 @@ int main(int argc, char *argv[])
> > > }
> > >
> > > igt_subtest_f("dpms") {
> > > + data.op_psr_mode = PSR_MODE_1;
> > > + data.op = RENDER;
> > > + data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
> > > + test_setup(&data);
> > > + dpms_off_on(&data);
> > > + run_test(&data);
> > > + test_cleanup(&data);
> > > + }
> > > +
> > > + igt_subtest_f("psr2_dpms") {
> > > + igt_require(data.supports_psr2);
> > > + data.op_psr_mode = PSR_MODE_2;
> > > data.op = RENDER;
> > > data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
> > > test_setup(&data);
> > > @@ -483,6 +570,20 @@ int main(int argc, char *argv[])
> > > }
> > >
> > > igt_subtest_f("suspend") {
> > > + data.op_psr_mode = PSR_MODE_1;
> > > + data.op = PLANE_ONOFF;
> > > + data.test_plane_id = DRM_PLANE_TYPE_CURSOR;
> > > + test_setup(&data);
> > > + igt_system_suspend_autoresume(SUSPEND_STATE_MEM,
> > > + SUSPEND_TEST_NONE);
> > > + igt_assert(psr_wait_entry_if_enabled(&data));
> > > + run_test(&data);
> > > + test_cleanup(&data);
> > > + }
> > > +
> > > + igt_subtest_f("psr2_suspend") {
> > > + igt_require(data.supports_psr2);
> > > + data.op_psr_mode = PSR_MODE_2;
> > > data.op = PLANE_ONOFF;
> > > data.test_plane_id = DRM_PLANE_TYPE_CURSOR;
> > > test_setup(&data);
More information about the igt-dev
mailing list