[igt-dev] [PATCH i-g-t] tests/kms_available_modes_crc: Fix handling of test comparisons
Dhinakaran Pandiyan
dhinakaran.pandiyan at intel.com
Wed Jan 30 18:23:57 UTC 2019
On Wed, 2019-01-30 at 13:25 +0200, Juha-Pekka Heikkila wrote:
> On 30.1.2019 8.40, Dhinakaran Pandiyan wrote:
> > On Fri, 2019-01-25 at 14:30 +0200, Juha-Pekka Heikkila wrote:
> > > Fixed handling of single plane modes so used bpp never get to
> > > be 0.
> > >
> > > Reduce verboseness if there's no errors.
> > >
> > > Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106701
> > > Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila at gmail.com>
> > > ---
> > > tests/kms_available_modes_crc.c | 123 ++++++++++++++++++++-----
> > > ---
> > > ------------
> > > 1 file changed, 61 insertions(+), 62 deletions(-)
> > >
> > > diff --git a/tests/kms_available_modes_crc.c
> > > b/tests/kms_available_modes_crc.c
> > > index 7ff385f..432c084 100644
> > > --- a/tests/kms_available_modes_crc.c
> > > +++ b/tests/kms_available_modes_crc.c
> > > @@ -54,6 +54,12 @@ typedef struct {
> > >
> > > igt_crc_t cursor_crc;
> > > igt_crc_t fullscreen_crc;
> > > +
> > > + /*
> > > + * If there's unknown format setting up mode can fail
> > > + * without failing entire test.
> > > + */
> > > + bool allow_fail;
> > > } data_t;
> > >
> > >
> > > @@ -120,7 +126,6 @@ static void
> > > generate_comparison_crc_list(data_t
> > > *data, igt_output_t *output)
> > >
> > > static const struct {
> > > uint32_t fourcc;
> > > - char zeropadding;
> > > enum { BYTES_PP_1=1,
> > > BYTES_PP_2=2,
> > > BYTES_PP_4=4,
> > > @@ -129,10 +134,10 @@ static const struct {
> > > SKIP4 } bpp;
> > > uint32_t value;
> > > } fillers[] = {
> > > - { DRM_FORMAT_C8, 0, BYTES_PP_1, 0xff},
> > > - { DRM_FORMAT_RGB565, 0, BYTES_PP_2, 0xffff},
> > > - { DRM_FORMAT_XRGB8888, 0, BYTES_PP_4, 0xffffffff},
> > > - { DRM_FORMAT_XBGR8888, 0, BYTES_PP_4, 0xffffffff},
> > > + { DRM_FORMAT_C8, BYTES_PP_1, 0xff},
> > > + { DRM_FORMAT_RGB565, BYTES_PP_2, 0xffff},
> > > + { DRM_FORMAT_XRGB8888, BYTES_PP_4, 0xffffffff},
> > > + { DRM_FORMAT_XBGR8888, BYTES_PP_4, 0xffffffff},
> > >
> > > /*
> > > * following two are skipped because blending seems to
> > > work
> > > @@ -140,31 +145,31 @@ static const struct {
> > > * Test still creates the planes, just filling plane
> > > * and getting crc is skipped.
> > > */
> > > - { DRM_FORMAT_ARGB8888, 0, SKIP4, 0xffffffff},
> > > - { DRM_FORMAT_ABGR8888, 0, SKIP4, 0x00ffffff},
> > > + { DRM_FORMAT_ARGB8888, SKIP4, 0xffffffff},
> > > + { DRM_FORMAT_ABGR8888, SKIP4, 0x00ffffff},
> > >
> > > - { DRM_FORMAT_XRGB2101010, 0, BYTES_PP_4, 0xffffffff},
> > > - { DRM_FORMAT_XBGR2101010, 0, BYTES_PP_4, 0xffffffff},
> > > + { DRM_FORMAT_XRGB2101010, BYTES_PP_4, 0xffffffff},
> > > + { DRM_FORMAT_XBGR2101010, BYTES_PP_4, 0xffffffff},
> > >
> > > - { DRM_FORMAT_YUYV, 0, BYTES_PP_4, 0x80eb80eb},
> > > - { DRM_FORMAT_YVYU, 0, BYTES_PP_4, 0x80eb80eb},
> > > - { DRM_FORMAT_VYUY, 0, BYTES_PP_4, 0xeb80eb80},
> > > - { DRM_FORMAT_UYVY, 0, BYTES_PP_4, 0xeb80eb80},
> > > + { DRM_FORMAT_YUYV, BYTES_PP_4, 0x80eb80eb},
> > > + { DRM_FORMAT_YVYU, BYTES_PP_4, 0x80eb80eb},
> > > + { DRM_FORMAT_VYUY, BYTES_PP_4, 0xeb80eb80},
> > > + { DRM_FORMAT_UYVY, BYTES_PP_4, 0xeb80eb80},
> > >
> > > /*
> > > * (semi-)planar formats
> > > */
> > > - { DRM_FORMAT_NV12, 0, NV12, 0x80eb},
> > > + { DRM_FORMAT_NV12, NV12, 0x80eb},
> > > #ifdef DRM_FORMAT_P010
> > > - { DRM_FORMAT_P010, 0, P010, 0x8000eb00},
> > > + { DRM_FORMAT_P010, P010, 0x8000eb00},
> > > #endif
> > > #ifdef DRM_FORMAT_P012
> > > - { DRM_FORMAT_P012, 0, P010, 0x8000eb00},
> > > + { DRM_FORMAT_P012, P010, 0x8000eb00},
> > > #endif
> > > #ifdef DRM_FORMAT_P016
> > > - { DRM_FORMAT_P016, 0, P010, 0x8000eb00},
> > > + { DRM_FORMAT_P016, P010, 0x8000eb00},
> >
> > Doesn't the library implement this stuff already? I see similar
> > code in
> > create_bo_for_fb(). Even if new formats are needed, I think it's
> > best
> > to put that in the lib/igt_fb.
>
> These days igt_fb does implement most of these modes I agree. This
> test
> was written back in the day when igt support was limited to RGB888
> and
> RGB565. Idea of this test was just to try all fb formats kernel
> advertised could actually initialize.
>
> If you feel this test is obsolete you could ask for votes to get it
> removed, I tried that before xmas but nobody was interested in
> removing
> this so I started to fix problems seen in this test.
I had a quick glance at kms_plane, like you said it pretty much does
the same things but better. My suggestion is to
1) add support in the library for the missing formats i.e.,
DRM_FORMAT_C8, DRM_FORMAT_XBGR2101010
2) get rid of this test.
-DK
>
> In any case these days one cannot include new fb formats into i915
> without IGT support so kms_plane test does what this test does.
>
> >
> >
> > > #endif
> > > - { 0, 0, 0, 0 }
> > > + { 0, SKIP4, 0 }
> > > };
> > >
> > > /*
> > > @@ -233,13 +238,10 @@ static bool fill_in_fb(data_t *data,
> > > igt_output_t *output, igt_plane_t *plane,
> > > writesize = data->size;
> > > break;
> > > }
> > > - igt_info("Format %s CRC comparison skipped by
> > > design.\n",
> > > - (char*)&fillers[i].fourcc);
> > > -
> > > - return false;
> > > + /* Fall through */
> > > default:
> > > - igt_info("Unsupported mode for test %s\n",
> > > - (char*)&fillers[i].fourcc);
> > > + igt_info("Unsupported mode for testing CRC %.4s\n",
> > > + (char *)&format);
> > > return false;
> > > }
> > >
> > > @@ -260,6 +262,8 @@ static bool setup_fb(data_t *data,
> > > igt_output_t
> > > *output, igt_plane_t *plane,
> > > int bpp = 0;
> > > int i;
> > >
> > > + data->allow_fail = false;
> > > +
> > > mode = igt_output_get_mode(output);
> > > if (plane->type != DRM_PLANE_TYPE_CURSOR) {
> > > w = mode->hdisplay;
> > > @@ -288,6 +292,8 @@ static bool setup_fb(data_t *data,
> > > igt_output_t
> > > *output, igt_plane_t *plane,
> > > break;
> > >
> > > case SKIP4:
> > > + data->allow_fail = true;
> > > + /* fall through */
> >
> > Wouldn't this prevent CRC testing for
> > (fillers[i].fourcc == DRM_FORMAT_ARGB8888 && plane->type ==
> > DRM_PLANE_TYPE_CURSOR) ?
>
> There was later patch which fixed this. This version didn't pass CI
> test
> because I had forgotten "igt_display_reset(&data->display)" call bit
> below, it killed test on KBL.
>
> >
> >
> > > case BYTES_PP_4:
> > > bpp = 32;
> > > break;
> > > @@ -324,7 +330,7 @@ static bool setup_fb(data_t *data,
> > > igt_output_t
> > > *output, igt_plane_t *plane,
> > >
> > > if(ret < 0) {
> > > igt_info("Creating fb for format %s failed,
> > > return code
> > > %d\n",
> > > - (char*)&data->format.name, ret);
> > > + (char *)&data->format.name, ret);
> > >
> > > return false;
> > > }
> > > @@ -385,13 +391,14 @@ static bool prepare_crtc(data_t *data,
> > > igt_output_t *output,
> > >
> > >
> > > static int
> > > -test_one_mode(data_t* data, igt_output_t *output, igt_plane_t*
> >
> > Side note not related to the changes you are making, "mode" is
> > quite
> > misleading. Shouldn't the test be called kms_pixel_formats_crc or
> > something? I thought this was about testing different connector
> > modes.
> >
> >
> > > plane,
> > > - int mode)
> > > +test_one_mode(data_t *data, igt_output_t *output, igt_plane_t
> > > *plane,
> > > + enum pipe pipe, int mode)
> > > {
> > > igt_crc_t current_crc;
> > > signed rVal = 0;
> > > bool do_crc;
> > > - char* crccompare[2];
> > > + char *crccompare[2];
> > > + igt_crc_t *p_crc;
> > >
> > > if (prepare_crtc(data, output, plane, mode)){
> > > /*
> > > @@ -409,32 +416,32 @@ test_one_mode(data_t* data, igt_output_t
> > > *output, igt_plane_t* plane,
> > > if (do_crc) {
> > > igt_pipe_crc_get_current(data->gfx_fd,
> > > data-
> > > > pipe_crc, ¤t_crc);
> > >
> > >
> > > - if (plane->type != DRM_PLANE_TYPE_CURSOR) {
> > > - if (!igt_check_crc_equal(¤t_crc,
> > > - &data->fullscreen_crc)) {
> > > - crccompare[0] =
> > > igt_crc_to_string(¤t_crc);
> > > - crccompare[1] =
> > > igt_crc_to_string(&data->fullscreen_crc);
> > > - igt_warn("crc mismatch. target
> > > %.8s, result %.8s.\n", crccompare[0], crccompare[1]);
> > > - free(crccompare[0]);
> > > - free(crccompare[1]);
> > > - rVal++;
> > > - }
> > > - } else {
> > > - if (!igt_check_crc_equal(¤t_crc,
> > > - &data->cursor_crc)) {
> > > - crccompare[0] =
> > > igt_crc_to_string(¤t_crc);
> > > - crccompare[1] =
> > > igt_crc_to_string(&data->cursor_crc);
> > > - igt_warn("crc mismatch. target
> > > %.8s, result %.8s.\n", crccompare[0], crccompare[1]);
> > > - free(crccompare[0]);
> > > - free(crccompare[1]);
> > > + if (plane->type != DRM_PLANE_TYPE_CURSOR)
> > > + p_crc = &data->fullscreen_crc;
> > > + else
> > > + p_crc = &data->cursor_crc;
> > > +
> > > + if (!igt_check_crc_equal(¤t_crc, p_crc))
> > > {
> > > + crccompare[0] =
> > > igt_crc_to_string(¤t_crc);
> > > + crccompare[1] =
> > > igt_crc_to_string(p_crc);
> > > + igt_warn("crc mismatch on %s PIPE %s
> > > plane %d format %.4s. target %.8s, result %.8s.\n",
> > > + igt_output_name(output),
> > > + kmstest_pipe_name(pipe),
> > > + plane->index,
> > > + (char *)&data->format.name,
> > > + crccompare[0],
> > > + crccompare[1]);
> >
> > This is the only hunk I was hoping you would be able to split into
> > a
> > separate patch.
> >
> > > +
> > > + free(crccompare[0]);
> > > + free(crccompare[1]);
> > > + if (!data->allow_fail)
> >
> > Is there a point of reading CRCs if failures are allowed?
>
> It is marked as mode which is not listed in this test but
> initialization
> worked so default paths are followed. It will produce warning which
> I
> think is useful for indicating this test need updating but will not
> produce failure to mark newly added features caused problems.
>
> >
> > > rVal++;
> > > - }
> > > }
> > > }
> > > remove_fb(data, output, plane);
> > > return rVal;
> > > }
> > > - return 1;
> > > + return data->allow_fail ? 0 : 1;
> > > }
> > >
> > >
> > > @@ -445,11 +452,11 @@ test_available_modes(data_t* data)
> > > igt_plane_t *plane;
> > > int modeindex;
> > > enum pipe pipe;
> > > - int invalids = 0;
> > > + int failed_crcs = 0;
> > > drmModePlane *modePlane;
> > > - char planetype[3][8] = {"OVERLAY\0", "PRIMARY\0", "CURSOR\0" };
> > >
> > > for_each_pipe_with_valid_output(&data->display, pipe,
> > > output) {
> > > + igt_display_reset(&data->display);
> > > igt_output_set_pipe(output, pipe);
> > > igt_display_commit2(&data->display, data-
> > > >commit);
> > >
> > > @@ -472,17 +479,9 @@ test_available_modes(data_t* data)
> > > modeindex++) {
> > > data->format.dword = modePlane-
> > > > formats[modeindex];
> > >
> > >
> > > - igt_info("Testing connector %s using
> > > pipe %s" \
> > > - " plane index %d type %s mode
> > > %s\n",
> > > - igt_output_name(output),
> > > - kmstest_pipe_name(pipe),
> > > - plane->index,
> > > - planetype[plane->type],
> > > - (char*)&data->format.name);
> > > -
> > > - invalids += test_one_mode(data, output,
> > > - plane,
> > > - modePlane-
> > > > formats[modeindex]);
> > >
> > > + failed_crcs += test_one_mode(data,
> > > output,
> > > + plane,
> > > pipe,
> > > + modePlane-
> > > > formats[modeindex]);
> > >
> > > }
> > > drmModeFreePlane(modePlane);
> > > }
> > > @@ -491,7 +490,7 @@ test_available_modes(data_t* data)
> > > igt_display_commit2(&data->display, data-
> > > >commit);
> > > igt_output_set_pipe(output, PIPE_NONE);
> > > }
> > > - igt_assert(invalids == 0);
> > > + igt_assert_f((failed_crcs == 0), "There was %d modes with
> > > invalid crc\n", failed_crcs);
> > > }
> > >
> > >
>
>
More information about the igt-dev
mailing list