[igt-dev] [PATCH i-g-t] tests/amdgpu: Add color tests for amdgpu

Daniel Vetter daniel.vetter at ffwll.ch
Thu Jul 11 17:30:39 UTC 2019


On Thu, Jul 11, 2019 at 7:19 PM Kazlauskas, Nicholas
<Nicholas.Kazlauskas at amd.com> wrote:
>
> On 7/11/19 1:15 PM, Daniel Vetter wrote:
> > On Wed, May 29, 2019 at 8:43 PM Li, Sun peng (Leo) <Sunpeng.Li at amd.com> wrote:
> >>
> >>
> >>
> >> On 2019-05-27 1:19 p.m., Nicholas Kazlauskas wrote:
> >>> The DRM color management pipeline doesn't directly map to AMD hardware
> >>> so creative solutions to implementing CRTC regamma, CTM and gamma were
> >>> needed for both DCE and DCN. A few mistakes were made in the process
> >>> that weren't caught by kms_color@ tests:
> >>>
> >>> - Can't get linear degamma output without setting a custom degamma
> >>> - Can't specify a non-linear degamma that produces correct output
> >>> - Can't specify a correct gamma when a linear degamma is used
> >>>
> >>> These are caused by using implicit sRGB degamma then sRGB gamma when no
> >>> matrices are set. This produces visually correct output when using a
> >>> CTM with no matrices set, but it's also technically the incorrect
> >>> output according to the DRM API documentation.
> >>>
> >>> These tests help verify that AMDGPU follows the DRM spec when it comes
> >>> to setting linear/bypass gamma and regamma LUT.
> >>>
> >>> The existing kms_color@ tests are written correctly already, so
> >>> anything that looks shared in these is really just to verify that we're
> >>> no longer doing any strange test specific workarounds outside of the
> >>> spec or documentation.
> >>>
> >>> Cc: Leo Li <sunpeng.li at amd.com>
> >>> Cc: Harry Wentland <harry.wentland at amd.com>
> >>> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas at amd.com>
> >>
> >> LGTM, thanks for the test!
> >>
> >> Reviewed-by: Leo Li <sunpeng.li at amd.com>
> >
> > btw why is this not a new subtest for kms_color? From a quick look
> > it's all generic. The specific testscase for amdpgpu (like
> > amd_bypass.c) all make sense, since they use specific crc tap points
> > and check hw implementation details. But this looks like a generic
> > issue with the color correction kms spec ... Also adding Harry.
> > -Daniel
>
> The test_crtc_lut_accuracy test is specific to our DCN hardware in terms
> of what we expect and that it requires a independent per channel CRC.
>
> The other two tests could probably be added to kms_color with the
> expectation that a linear LUT is going to be the same as not setting any
> LUT at all on the hardware.
>
> I don't think there's any issue here with the kms spec, it's clearly
> defined - we were previously breaking the spec by not actually using
> bypass for a NULL LUT.

I mean: you found a gap between the spec and the kms_color test
coverage. I think it's worth fixing this, since if you hit this one,
then probably someone else hits this too with their hw/driver combo.
And the long term goal with igt is that at least for kms, it would be
a conformance test suite. Would be great if you could port these two
tests to kms_color (the one that makes specific assumptions about DCN
hw obviously can't be ported). And yeah the assumption, at least for
RGB formats is that "no gamm" == "linear gamma", and having a testcase
for this explicitly sounds like a great idea.
-Daniel

> Nicholas Kazlauskas
>
> >
> >>
> >>> ---
> >>>    tests/Makefile.sources   |   1 +
> >>>    tests/amdgpu/amd_color.c | 405 +++++++++++++++++++++++++++++++++++++++
> >>>    tests/amdgpu/meson.build |   1 +
> >>>    3 files changed, 407 insertions(+)
> >>>    create mode 100644 tests/amdgpu/amd_color.c
> >>>
> >>> diff --git a/tests/Makefile.sources b/tests/Makefile.sources
> >>> index 2d5c929e..ef3c03f2 100644
> >>> --- a/tests/Makefile.sources
> >>> +++ b/tests/Makefile.sources
> >>> @@ -6,6 +6,7 @@ NOUVEAU_TESTS = \
> >>>
> >>>    AMDGPU_TESTS = \
> >>>        amdgpu/amd_basic \
> >>> +     amdgpu/amd_color \
> >>>        amdgpu/amd_cs_nop \
> >>>        amdgpu/amd_prime \
> >>>        amdgpu/amd_abm \
> >>> diff --git a/tests/amdgpu/amd_color.c b/tests/amdgpu/amd_color.c
> >>> new file mode 100644
> >>> index 00000000..0bbee43d
> >>> --- /dev/null
> >>> +++ b/tests/amdgpu/amd_color.c
> >>> @@ -0,0 +1,405 @@
> >>> +/*
> >>> + * Copyright 2019 Advanced Micro Devices, Inc.
> >>> + *
> >>> + * Permission is hereby granted, free of charge, to any person obtaining a
> >>> + * copy of this software and associated documentation files (the "Software"),
> >>> + * to deal in the Software without restriction, including without limitation
> >>> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> >>> + * and/or sell copies of the Software, and to permit persons to whom the
> >>> + * Software is furnished to do so, subject to the following conditions:
> >>> + *
> >>> + * The above copyright notice and this permission notice shall be included in
> >>> + * all copies or substantial portions of the Software.
> >>> + *
> >>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> >>> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> >>> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
> >>> + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
> >>> + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> >>> + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> >>> + * OTHER DEALINGS IN THE SOFTWARE.
> >>> + */
> >>> +
> >>> +#include "igt.h"
> >>> +
> >>> +/* (De)gamma LUT. */
> >>> +typedef struct lut {
> >>> +     struct drm_color_lut *data;
> >>> +     uint32_t size;
> >>> +} lut_t;
> >>> +
> >>> +/* RGB color. */
> >>> +typedef struct color {
> >>> +     double r;
> >>> +     double g;
> >>> +     double b;
> >>> +} color_t;
> >>> +
> >>> +/* Common test data. */
> >>> +typedef struct data {
> >>> +     igt_display_t display;
> >>> +     igt_plane_t *primary;
> >>> +     igt_output_t *output;
> >>> +     igt_pipe_t *pipe;
> >>> +     igt_pipe_crc_t *pipe_crc;
> >>> +     drmModeModeInfo *mode;
> >>> +     enum pipe pipe_id;
> >>> +     int fd;
> >>> +     int w;
> >>> +     int h;
> >>> +     uint32_t regamma_lut_size;
> >>> +     uint32_t degamma_lut_size;
> >>> +} data_t;
> >>> +
> >>> +static void lut_init(lut_t *lut, uint32_t size)
> >>> +{
> >>> +     igt_assert(size > 0);
> >>> +
> >>> +     lut->size = size;
> >>> +     lut->data = malloc(size * sizeof(struct drm_color_lut));
> >>> +     igt_assert(lut);
> >>> +}
> >>> +
> >>> +/* Generates the linear gamma LUT. */
> >>> +static void lut_gen_linear(lut_t *lut, uint16_t mask)
> >>> +{
> >>> +     uint32_t n = lut->size - 1;
> >>> +     uint32_t i;
> >>> +
> >>> +     for (i = 0; i < lut->size; ++i) {
> >>> +             uint32_t v = (i * 0xffff / n) & mask;
> >>> +
> >>> +             lut->data[i].red = v;
> >>> +             lut->data[i].blue = v;
> >>> +             lut->data[i].green = v;
> >>> +     }
> >>> +}
> >>> +
> >>> +/* Generates the sRGB degamma LUT. */
> >>> +static void lut_gen_degamma_srgb(lut_t *lut, uint16_t mask)
> >>> +{
> >>> +     double range = lut->size - 1;
> >>> +     uint32_t i;
> >>> +
> >>> +     for (i = 0; i < lut->size; ++i) {
> >>> +             double u, coeff;
> >>> +             uint32_t v;
> >>> +
> >>> +             u = i / range;
> >>> +             coeff = u <= 0.040449936 ? (u / 12.92)
> >>> +                                      : (pow((u + 0.055) / 1.055, 2.4));
> >>> +             v = (uint32_t)(coeff * 0xffff) & mask;
> >>> +
> >>> +             lut->data[i].red = v;
> >>> +             lut->data[i].blue = v;
> >>> +             lut->data[i].green = v;
> >>> +     }
> >>> +}
> >>> +
> >>> +/* Generates the sRGB gamma LUT. */
> >>> +static void lut_gen_regamma_srgb(lut_t *lut, uint16_t mask)
> >>> +{
> >>> +     double range = lut->size - 1;
> >>> +     uint32_t i;
> >>> +
> >>> +     for (i = 0; i < lut->size; ++i) {
> >>> +             double u, coeff;
> >>> +             uint32_t v;
> >>> +
> >>> +             u = i / range;
> >>> +             coeff = u <= 0.00313080 ? (12.92 * u)
> >>> +                                     : (1.055 * pow(u, 1.0 / 2.4) - 0.055);
> >>> +             v = (uint32_t)(coeff * 0xffff) & mask;
> >>> +
> >>> +             lut->data[i].red = v;
> >>> +             lut->data[i].blue = v;
> >>> +             lut->data[i].green = v;
> >>> +     }
> >>> +}
> >>> +
> >>> +static void lut_free(lut_t *lut)
> >>> +{
> >>> +     if (lut->data) {
> >>> +             free(lut->data);
> >>> +             lut->data = NULL;
> >>> +     }
> >>> +
> >>> +     lut->size = 0;
> >>> +}
> >>> +
> >>> +/* Fills a FB with the solid color given. */
> >>> +static void draw_color(igt_fb_t *fb, double r, double g, double b)
> >>> +{
> >>> +     cairo_t *cr = igt_get_cairo_ctx(fb->fd, fb);
> >>> +
> >>> +     cairo_set_operator(cr, CAIRO_OPERATOR_SOURCE);
> >>> +     igt_paint_color(cr, 0, 0, fb->width, fb->height, r, g, b);
> >>> +     igt_put_cairo_ctx(fb->fd, fb, cr);
> >>> +}
> >>> +
> >>> +/* Generates the gamma test pattern. */
> >>> +static void draw_gamma_test(igt_fb_t *fb)
> >>> +{
> >>> +     cairo_t *cr = igt_get_cairo_ctx(fb->fd, fb);
> >>> +     int gh = fb->height / 4;
> >>> +
> >>> +     igt_paint_color_gradient(cr, 0, 0, fb->width, gh, 1, 1, 1);
> >>> +     igt_paint_color_gradient(cr, 0, gh, fb->width, gh, 1, 0, 0);
> >>> +     igt_paint_color_gradient(cr, 0, gh * 2, fb->width, gh, 0, 1, 0);
> >>> +     igt_paint_color_gradient(cr, 0, gh * 3, fb->width, gh, 0, 0, 1);
> >>> +
> >>> +     igt_put_cairo_ctx(fb->fd, fb, cr);
> >>> +}
> >>> +
> >>> +/* Sets the degamma LUT. */
> >>> +static void set_degamma_lut(data_t *data, lut_t const *lut)
> >>> +{
> >>> +     size_t size = lut ? sizeof(lut->data[0]) * lut->size : 0;
> >>> +     const void *ptr = lut ? lut->data : NULL;
> >>> +
> >>> +     igt_pipe_obj_replace_prop_blob(data->pipe, IGT_CRTC_DEGAMMA_LUT, ptr,
> >>> +                                    size);
> >>> +}
> >>> +
> >>> +/* Sets the regamma LUT. */
> >>> +static void set_regamma_lut(data_t *data, lut_t const *lut)
> >>> +{
> >>> +     size_t size = lut ? sizeof(lut->data[0]) * lut->size : 0;
> >>> +     const void *ptr = lut ? lut->data : NULL;
> >>> +
> >>> +     igt_pipe_obj_replace_prop_blob(data->pipe, IGT_CRTC_GAMMA_LUT, ptr,
> >>> +                                    size);
> >>> +}
> >>> +
> >>> +/* Common test setup. */
> >>> +static void test_init(data_t *data)
> >>> +{
> >>> +     igt_display_t *display = &data->display;
> >>> +
> >>> +     /* It doesn't matter which pipe we choose on amdpgu. */
> >>> +     data->pipe_id = PIPE_A;
> >>> +     data->pipe = &data->display.pipes[data->pipe_id];
> >>> +
> >>> +     igt_display_reset(display);
> >>> +
> >>> +     data->output = igt_get_single_output_for_pipe(display, data->pipe_id);
> >>> +     igt_require(data->output);
> >>> +
> >>> +     data->mode = igt_output_get_mode(data->output);
> >>> +     igt_assert(data->mode);
> >>> +
> >>> +     data->primary =
> >>> +             igt_pipe_get_plane_type(data->pipe, DRM_PLANE_TYPE_PRIMARY);
> >>> +
> >>> +     data->pipe_crc = igt_pipe_crc_new(data->fd, data->pipe_id,
> >>> +                                       INTEL_PIPE_CRC_SOURCE_AUTO);
> >>> +
> >>> +     igt_output_set_pipe(data->output, data->pipe_id);
> >>> +
> >>> +     data->degamma_lut_size =
> >>> +             igt_pipe_obj_get_prop(data->pipe, IGT_CRTC_DEGAMMA_LUT_SIZE);
> >>> +     igt_assert_lt(0, data->degamma_lut_size);
> >>> +
> >>> +     data->regamma_lut_size =
> >>> +             igt_pipe_obj_get_prop(data->pipe, IGT_CRTC_GAMMA_LUT_SIZE);
> >>> +     igt_assert_lt(0, data->regamma_lut_size);
> >>> +
> >>> +     data->w = data->mode->hdisplay;
> >>> +     data->h = data->mode->vdisplay;
> >>> +}
> >>> +
> >>> +/* Common test cleanup. */
> >>> +static void test_fini(data_t *data)
> >>> +{
> >>> +     igt_pipe_crc_free(data->pipe_crc);
> >>> +     igt_display_reset(&data->display);
> >>> +}
> >>> +
> >>> +/*
> >>> + * Older versions of amdgpu would put the pipe into bypass mode for degamma
> >>> + * when passed a linear sRGB matrix but would still use an sRGB regamma
> >>> + * matrix if not passed any. The whole pipe should be in linear bypass mode
> >>> + * when all the matrices are NULL - CRCs for a linear degamma matrix and
> >>> + * a NULL one should match.
> >>> + */
> >>> +static void test_crtc_linear_degamma(data_t *data)
> >>> +{
> >>> +     igt_display_t *display = &data->display;
> >>> +     igt_crc_t ref_crc, new_crc;
> >>> +     igt_fb_t afb;
> >>> +     lut_t lut_linear;
> >>> +
> >>> +     test_init(data);
> >>> +
> >>> +     lut_init(&lut_linear, data->degamma_lut_size);
> >>> +     lut_gen_linear(&lut_linear, 0xffff);
> >>> +
> >>> +     igt_create_fb(data->fd, data->w, data->h, DRM_FORMAT_XRGB8888, 0, &afb);
> >>> +     draw_gamma_test(&afb);
> >>> +
> >>> +     /* Draw the reference image. */
> >>> +     igt_plane_set_fb(data->primary, &afb);
> >>> +     set_regamma_lut(data, NULL);
> >>> +     set_degamma_lut(data, NULL);
> >>> +     igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
> >>> +
> >>> +     igt_pipe_crc_collect_crc(data->pipe_crc, &ref_crc);
> >>> +
> >>> +     /* Apply a linear degamma. The result should remain the same. */
> >>> +     set_degamma_lut(data, &lut_linear);
> >>> +     igt_display_commit_atomic(display, 0, NULL);
> >>> +
> >>> +     igt_pipe_crc_collect_crc(data->pipe_crc, &new_crc);
> >>> +     igt_assert_crc_equal(&ref_crc, &new_crc);
> >>> +
> >>> +     test_fini(data);
> >>> +     igt_remove_fb(data->fd, &afb);
> >>> +     lut_free(&lut_linear);
> >>> +}
> >>> +
> >>> +/*
> >>> + * Older versions of amdgpu would apply the CRTC regamma on top of a custom
> >>> + * sRGB regamma matrix with incorrect calculations or rounding errors.
> >>> + * If we put the pipe into bypass or use the hardware defined sRGB regamma
> >>> + * on the plane then we can and should get the correct CRTC when passing a
> >>> + * liner regamma matrix to DRM.
> >>> + */
> >>> +static void test_crtc_linear_regamma(data_t *data)
> >>> +{
> >>> +     igt_display_t *display = &data->display;
> >>> +     igt_crc_t ref_crc, new_crc;
> >>> +     igt_fb_t afb;
> >>> +     lut_t lut_linear;
> >>> +
> >>> +     test_init(data);
> >>> +
> >>> +     lut_init(&lut_linear, data->regamma_lut_size);
> >>> +     lut_gen_linear(&lut_linear, 0xffff);
> >>> +
> >>> +     igt_create_fb(data->fd, data->w, data->h, DRM_FORMAT_XRGB8888, 0, &afb);
> >>> +     draw_gamma_test(&afb);
> >>> +
> >>> +     /* Draw the reference image. */
> >>> +     igt_plane_set_fb(data->primary, &afb);
> >>> +     set_regamma_lut(data, NULL);
> >>> +     set_degamma_lut(data, NULL);
> >>> +     igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
> >>> +
> >>> +     igt_pipe_crc_collect_crc(data->pipe_crc, &ref_crc);
> >>> +
> >>> +     /* Apply a linear degamma. The result should remain the same. */
> >>> +     set_regamma_lut(data, &lut_linear);
> >>> +     igt_display_commit_atomic(display, 0, NULL);
> >>> +
> >>> +     igt_pipe_crc_collect_crc(data->pipe_crc, &new_crc);
> >>> +     igt_assert_crc_equal(&ref_crc, &new_crc);
> >>> +
> >>> +     test_fini(data);
> >>> +     igt_remove_fb(data->fd, &afb);
> >>> +     lut_free(&lut_linear);
> >>> +}
> >>> +
> >>> +/*
> >>> + * Tests LUT accuracy. CRTC regamma and CRTC degamma should produce a visually
> >>> + * correct image when used. Hardware limitations on degamma prevent this from
> >>> + * being CRC level accurate across a full test gradient but most values should
> >>> + * still match.
> >>> + *
> >>> + * This test can't pass on DCE because it doesn't support non-linear degamma.
> >>> + */
> >>> +static void test_crtc_lut_accuracy(data_t *data)
> >>> +{
> >>> +     /*
> >>> +      * Channels are independent, so we can verify multiple colors at the
> >>> +      * same time for improved performance.
> >>> +      */
> >>> +     static const color_t colors[] = {
> >>> +             { 1.00, 1.00, 1.00 },
> >>> +             { 0.90, 0.85, 0.75 }, /* 0.95 fails */
> >>> +             { 0.70, 0.65, 0.60 },
> >>> +             { 0.55, 0.50, 0.45 },
> >>> +             { 0.40, 0.35, 0.30 },
> >>> +             { 0.25, 0.20, 0.15 },
> >>> +             { 0.10, 0.04, 0.02 }, /* 0.05 fails */
> >>> +             { 0.00, 0.00, 0.00 },
> >>> +     };
> >>> +     igt_display_t *display = &data->display;
> >>> +     igt_crc_t ref_crc, new_crc;
> >>> +     igt_fb_t afb;
> >>> +     lut_t lut_degamma, lut_regamma;
> >>> +     int i, w, h;
> >>> +
> >>> +     test_init(data);
> >>> +
> >>> +     lut_init(&lut_degamma, data->degamma_lut_size);
> >>> +     lut_gen_degamma_srgb(&lut_degamma, 0xffff);
> >>> +
> >>> +     lut_init(&lut_regamma, data->regamma_lut_size);
> >>> +     lut_gen_regamma_srgb(&lut_regamma, 0xffff);
> >>> +
> >>> +     /* Don't draw across the whole screen to improve perf. */
> >>> +     w = 64;
> >>> +     h = 64;
> >>> +
> >>> +     igt_create_fb(data->fd, w, h, DRM_FORMAT_XRGB8888, 0, &afb);
> >>> +     igt_plane_set_fb(data->primary, &afb);
> >>> +     igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
> >>> +
> >>> +     /* Test colors. */
> >>> +     for (i = 0; i < ARRAY_SIZE(colors); ++i) {
> >>> +             color_t col = colors[i];
> >>> +
> >>> +             igt_info("Testing color (%.2f, %.2f, %.2f) ...\n", col.r, col.g,
> >>> +                      col.b);
> >>> +
> >>> +             draw_color(&afb, col.r, col.g, col.b);
> >>> +
> >>> +             set_regamma_lut(data, NULL);
> >>> +             set_degamma_lut(data, NULL);
> >>> +             igt_display_commit_atomic(display, 0, NULL);
> >>> +
> >>> +             igt_pipe_crc_collect_crc(data->pipe_crc, &ref_crc);
> >>> +
> >>> +             set_degamma_lut(data, &lut_degamma);
> >>> +             set_regamma_lut(data, &lut_regamma);
> >>> +             igt_display_commit_atomic(display, 0, NULL);
> >>> +
> >>> +             igt_pipe_crc_collect_crc(data->pipe_crc, &new_crc);
> >>> +
> >>> +             igt_assert_crc_equal(&ref_crc, &new_crc);
> >>> +     }
> >>> +
> >>> +     test_fini(data);
> >>> +     igt_remove_fb(data->fd, &afb);
> >>> +     lut_free(&lut_regamma);
> >>> +     lut_free(&lut_degamma);
> >>> +}
> >>> +
> >>> +igt_main
> >>> +{
> >>> +     data_t data;
> >>> +
> >>> +     igt_skip_on_simulation();
> >>> +
> >>> +     memset(&data, 0, sizeof(data));
> >>> +
> >>> +     igt_fixture
> >>> +     {
> >>> +             data.fd = drm_open_driver_master(DRIVER_AMDGPU);
> >>> +
> >>> +             kmstest_set_vt_graphics_mode();
> >>> +
> >>> +             igt_display_require(&data.display, data.fd);
> >>> +             igt_require(data.display.is_atomic);
> >>> +             igt_display_require_output(&data.display);
> >>> +     }
> >>> +
> >>> +     igt_subtest("crtc-linear-degamma") test_crtc_linear_degamma(&data);
> >>> +     igt_subtest("crtc-linear-regamma") test_crtc_linear_regamma(&data);
> >>> +     igt_subtest("crtc-lut-accuracy") test_crtc_lut_accuracy(&data);
> >>> +
> >>> +     igt_fixture
> >>> +     {
> >>> +             igt_display_fini(&data.display);
> >>> +     }
> >>> +}
> >>> diff --git a/tests/amdgpu/meson.build b/tests/amdgpu/meson.build
> >>> index 1afece86..42086374 100644
> >>> --- a/tests/amdgpu/meson.build
> >>> +++ b/tests/amdgpu/meson.build
> >>> @@ -4,6 +4,7 @@ amdgpu_deps = test_deps
> >>>    if libdrm_amdgpu.found()
> >>>        amdgpu_progs += [ 'amd_abm',
> >>>                          'amd_basic',
> >>> +                       'amd_color',
> >>>                          'amd_cs_nop',
> >>>                          'amd_prime',
> >>>                        ]
> >>>
> >> _______________________________________________
> >> igt-dev mailing list
> >> igt-dev at lists.freedesktop.org
> >> https://lists.freedesktop.org/mailman/listinfo/igt-dev
> >
> >
> >
>


-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch


More information about the igt-dev mailing list