[igt-dev] [PATCH i-g-t 3/3] tests/kms_chamelium: add an audio EDID test

[Martin Peres]

On 06/06/2019 14:48, Simon Ser wrote:
> This test enables a Chamelium port with an audio-friendly EDID, and then checks
> that the EDID-Like Data exposed by ALSA matches our expectations.


> 
> Signed-off-by: Simon Ser <simon.ser at intel.com>
> ---
>  tests/kms_chamelium.c | 58 +++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 58 insertions(+)
> 
> diff --git a/tests/kms_chamelium.c b/tests/kms_chamelium.c
> index 3beea0c623bd..1a5271bb770f 100644
> --- a/tests/kms_chamelium.c
> +++ b/tests/kms_chamelium.c
> @@ -28,6 +28,7 @@
>  #include "igt.h"
>  #include "igt_vc4.h"
>  #include "igt_edid.h"
> +#include "igt_eld.h"
>  
>  #include <fcntl.h>
>  #include <pthread.h>
> @@ -1428,6 +1429,55 @@ test_display_audio(data_t *data, struct chamelium_port *port,
>  	free(alsa);
>  }
>  
> +static void
> +test_display_audio_edid(data_t *data, struct chamelium_port *port,
> +			enum test_edid edid)
> +{
> +	igt_output_t *output;
> +	igt_plane_t *primary;
> +	struct igt_fb fb;
> +	drmModeModeInfo *mode;
> +	drmModeConnector *connector;
> +	int fb_id;
> +	struct eld_entry eld;
> +	struct eld_sad *sad;
> +
> +	reset_state(data, port);
> +
> +	output = prepare_output(data, port, edid);
> +	connector = chamelium_port_get_connector(data->chamelium, port, false);
> +	primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
> +	igt_assert(primary);
> +
> +	/* Enable the output because audio cannot be played on inactive
> +	 * connectors. */
> +	igt_assert(connector->count_modes > 0);
> +	mode = &connector->modes[0];
> +
> +	fb_id = igt_create_color_pattern_fb(data->drm_fd,
> +					    mode->hdisplay, mode->vdisplay,
> +					    DRM_FORMAT_XRGB8888,
> +					    LOCAL_DRM_FORMAT_MOD_NONE,
> +					    0, 0, 0, &fb);
> +	igt_assert(fb_id > 0);
> +
> +	enable_output(data, port, output, mode, &fb);
> +
> +	igt_assert(eld_get_igt(&eld));
> +	igt_assert(eld.sads_len == 1);
> +
> +	sad = &eld.sads[0];
> +	igt_assert(sad->coding_type == CEA_SAD_FORMAT_PCM);
> +	igt_assert(sad->channels == 2);
> +	igt_assert(sad->rates == (CEA_SAD_SAMPLING_RATE_32KHZ |
> +		   CEA_SAD_SAMPLING_RATE_44KHZ | CEA_SAD_SAMPLING_RATE_48KHZ));
> +	igt_assert(sad->bits == (CEA_SAD_SAMPLE_SIZE_16 |
> +		   CEA_SAD_SAMPLE_SIZE_20 | CEA_SAD_SAMPLE_SIZE_24));

If we have only one tests for one EDID, I would suggest trying more
coding_types and channels to make it less typical (we want to detect
hardcoded values).

With channels = 8 and a couple of other coding_types, the patch is:
Reviewed-by: Martin Peres <martin.peres at linux.intel.com>

Any plans on generating broken ELDs and seeing how Alsa parses that?

Martin
> +
> +	igt_remove_fb(data->drm_fd, &fb);
> +
> +	drmModeFreeConnector(connector);
> +}
>  
>  static void randomize_plane_stride(data_t *data,
>  				   uint32_t width, uint32_t height,
> @@ -2118,6 +2168,10 @@ igt_main
>  		connector_subtest("dp-audio", DisplayPort)
>  			test_display_audio(&data, port, "HDMI",
>  					   TEST_EDID_DP_AUDIO);
> +
> +		connector_subtest("dp-audio-edid", DisplayPort)
> +			test_display_audio_edid(&data, port,
> +						TEST_EDID_DP_AUDIO);
>  	}
>  
>  	igt_subtest_group {
> @@ -2269,6 +2323,10 @@ igt_main
>  		connector_subtest("hdmi-audio", HDMIA)
>  			test_display_audio(&data, port, "HDMI",
>  					   TEST_EDID_HDMI_AUDIO);
> +
> +		connector_subtest("hdmi-audio-edid", HDMIA)
> +			test_display_audio_edid(&data, port,
> +						TEST_EDID_HDMI_AUDIO);
>  	}
>  
>  	igt_subtest_group {
>