[igt-dev] [PATCH i-g-t] tests/chamelium: Add test for hotplug workaround

[José Roberto de Souza]

It is know that some unpowered type-c dongles can take some time to
boot and be responsible in the DDC/aux transaction lines so a
workaround was implemented in kernel(drm/i915: Enable hotplug retry)
to fix it but is possible that this could happen to other DP sinks.

So this test will try to simulate the sceneario described above, it
will disable the DDC lines and plug the connector, the hotplug should
fail and then enabling the DDC lines kernel should report the
connector as connected.

The workaround will reprobe connector after 1 second after kernel
gives up on the first try to probe the connector, so that is why a
smaller timeout to detect hotplug was needed.

Cc: Imre Deak <imre.deak at intel.com>
Signed-off-by: José Roberto de Souza <jose.souza at intel.com>
---
 tests/kms_chamelium.c | 70 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

diff --git a/tests/kms_chamelium.c b/tests/kms_chamelium.c
index c2090037..50a553f2 100644
--- a/tests/kms_chamelium.c
+++ b/tests/kms_chamelium.c
@@ -45,6 +45,8 @@ typedef struct {
 
 #define HOTPLUG_TIMEOUT 20 /* seconds */
 
+#define FAST_HOTPLUG_SEC_TIMEOUT (1)
+
 #define HPD_STORM_PULSE_INTERVAL_DP 100 /* ms */
 #define HPD_STORM_PULSE_INTERVAL_HDMI 200 /* ms */
 
@@ -107,6 +109,21 @@ reprobe_connector(data_t *data, struct chamelium_port *port)
 	return status;
 }
 
+static drmModeConnection
+connector_status_get(data_t *data, struct chamelium_port *port)
+{
+	drmModeConnector *connector;
+	drmModeConnection status;
+
+	igt_debug("Getting connector state %s...\n", chamelium_port_get_name(port));
+	connector = chamelium_port_get_connector(data->chamelium, port, false);
+	igt_assert(connector);
+	status = connector->connection;
+
+	drmModeFreeConnector(connector);
+	return status;
+}
+
 static void
 wait_for_connector(data_t *data, struct chamelium_port *port,
 		   drmModeConnection status)
@@ -253,6 +270,56 @@ test_basic_hotplug(data_t *data, struct chamelium_port *port, int toggle_count)
 	igt_hpd_storm_reset(data->drm_fd);
 }
 
+/*
+ * Test kernel workaround for sinks that takes some time to have the DDC/aux
+ * channel responsive after the hotplug
+ */
+static void
+test_late_aux_wa(data_t *data, struct chamelium_port *port)
+{
+	struct udev_monitor *mon = igt_watch_hotplug();
+	drmModeConnection status;
+
+	/* Reset will unplug all connectors */
+	reset_state(data, NULL);
+
+	/* Check if it device can act on hotplugs fast enough for this test */
+	igt_flush_hotplugs(mon);
+	chamelium_plug(data->chamelium, port);
+	igt_assert(igt_hotplug_detected(mon, FAST_HOTPLUG_SEC_TIMEOUT));
+	status = connector_status_get(data, port);
+	igt_require(status == DRM_MODE_CONNECTED);
+
+	igt_flush_hotplugs(mon);
+	chamelium_unplug(data->chamelium, port);
+	igt_assert(igt_hotplug_detected(mon, FAST_HOTPLUG_SEC_TIMEOUT));
+	status = connector_status_get(data, port);
+	igt_require(status == DRM_MODE_DISCONNECTED);
+
+	/* It is fast enough, lets disable the DDC lines and plug again */
+	igt_flush_hotplugs(mon);
+	chamelium_port_set_ddc_state(data->chamelium, port, false);
+	chamelium_plug(data->chamelium, port);
+	igt_assert(!chamelium_port_get_ddc_state(data->chamelium, port));
+
+	/*
+	 * Give some time to kernel try to process hotplug but it should fail
+	 */
+	igt_hotplug_detected(mon, FAST_HOTPLUG_SEC_TIMEOUT);
+	status = connector_status_get(data, port);
+	igt_assert(status == DRM_MODE_DISCONNECTED);
+
+	/*
+	 * Enable the DDC line and the kernel workaround should reprobe and
+	 * report as connected
+	 */
+	chamelium_port_set_ddc_state(data->chamelium, port, true);
+	igt_assert(chamelium_port_get_ddc_state(data->chamelium, port));
+	igt_assert(igt_hotplug_detected(mon, FAST_HOTPLUG_SEC_TIMEOUT));
+	status = connector_status_get(data, port);
+	igt_assert(status == DRM_MODE_CONNECTED);
+}
+
 static void
 test_edid_read(data_t *data, struct chamelium_port *port,
 	       int edid_id, const unsigned char *edid)
@@ -1308,6 +1375,9 @@ igt_main
 
 		connector_subtest("dp-frame-dump", DisplayPort)
 			test_display_frame_dump(&data, port);
+
+		connector_subtest("dp-late-aux-wa", DisplayPort)
+			test_late_aux_wa(&data, port);
 	}
 
 	igt_subtest_group {
-- 
2.21.0