[igt-dev] [PATCH v6 3/3] tests/kms_ccs: Add GEN12 CCS render compression format modifiers
Imre Deak
imre.deak at intel.com
Thu Nov 14 19:48:38 UTC 2019
On Thu, Nov 14, 2019 at 11:44:03AM +0200, Mika Kahola wrote:
> From: Mika Kahola <mika.kahola at intel.com>
>
> Add GEN12 CCS format modifiers for render compression. Render
> compression is not supported for 90/270 rotation.
>
> v2: Added new subtests for each format modifier.
> v3: Add IGT description for each subtest (GitLab)
> v4: Fix errorneous subtest execution and listing
Hm, what went wrong here? I can't see any problem with simply adding
LOCAL_I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS to ccs_modifiers; running
kms_ccs that way, all subtests that are expected to pass are passing now
and all the ones that are expected to skip are skipping. Renaming
existing tests should be also avoided.
> v5: Fix AUX surface units for GEN12 (Imre)
>
> Bspec: 49252
>
> Signed-off-by: Mika Kahola <mika.kahola at intel.com>
> ---
> tests/kms_ccs.c | 117 +++++++++++++++++++++++++++++-------------------
> 1 file changed, 71 insertions(+), 46 deletions(-)
>
> diff --git a/tests/kms_ccs.c b/tests/kms_ccs.c
> index 1ce66cde..a99eba87 100644
> --- a/tests/kms_ccs.c
> +++ b/tests/kms_ccs.c
> @@ -70,10 +70,14 @@ static const struct {
> {0.0, 1.0, 0.0}
> };
>
> -static const uint64_t ccs_modifiers[] = {
> - LOCAL_I915_FORMAT_MOD_Y_TILED_CCS,
> - LOCAL_I915_FORMAT_MOD_Yf_TILED_CCS,
> -};
> +static const struct {
> + uint64_t modifier;
> + char name[8];
> +} ccs_modifiers[3] = {
> + {LOCAL_I915_FORMAT_MOD_Y_TILED_CCS, "Y"},
> + {LOCAL_I915_FORMAT_MOD_Yf_TILED_CCS, "Yf"},
> + {LOCAL_I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS, "Y-rc"},
> + };
>
> /*
> * Limit maximum used sprite plane width so this test will not mistakenly
> @@ -109,8 +113,14 @@ static void generate_fb(data_t *data, struct igt_fb *fb,
> uint32_t format;
> uint64_t modifier;
> cairo_t *cr;
> + int unit;
> int ret;
>
> + if (intel_gen(intel_get_drm_devid(data->drm_fd)) >= 12)
> + unit = 64;
> + else
> + unit = 128;
> +
> /* Use either compressed or Y-tiled to test. However, given the lack of
> * available bandwidth, we use linear for the primary plane when
> * testing sprites, since we cannot fit two CCS planes into the
> @@ -137,13 +147,13 @@ static void generate_fb(data_t *data, struct igt_fb *fb,
> if (fb_flags & FB_MISALIGN_AUX_STRIDE) {
> igt_skip_on_f(width <= 1024,
> "FB already has the smallest possible stride\n");
> - f.pitches[1] -= 64;
> + f.pitches[1] -= (unit/2);
> }
>
> if (fb_flags & FB_SMALL_AUX_STRIDE) {
> igt_skip_on_f(width <= 1024,
> "FB already has the smallest possible stride\n");
> - f.pitches[1] = ALIGN(f.pitches[1]/2, 128);
> + f.pitches[1] = ALIGN(f.pitches[1]/2, unit);
> }
>
> if (fb_flags & FB_ZERO_AUX_STRIDE)
> @@ -300,17 +310,14 @@ static int test_ccs(data_t *data)
> static int __test_output(data_t *data)
> {
> igt_display_t *display = &data->display;
> - int i, valid_tests = 0;
> + int valid_tests = 0;
>
> data->output = igt_get_single_output_for_pipe(display, data->pipe);
> igt_require(data->output);
>
> igt_output_set_pipe(data->output, data->pipe);
>
> - for (i = 0; i < ARRAY_SIZE(ccs_modifiers); i++) {
> - data->ccs_modifier = ccs_modifiers[i];
> - valid_tests += test_ccs(data);
> - }
> + valid_tests += test_ccs(data);
>
> igt_output_set_pipe(data->output, PIPE_NONE);
> igt_display_commit2(display, display->is_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY);
> @@ -320,7 +327,12 @@ static int __test_output(data_t *data)
>
> static void test_output(data_t *data)
> {
> - int valid_tests = __test_output(data);
> + int valid_tests;
> +
> + igt_skip_on(!igt_display_has_format_mod(&data->display, DRM_FORMAT_XRGB8888,
> + data->ccs_modifier));
> +
> + valid_tests = __test_output(data);
> igt_require_f(valid_tests > 0, "CCS not supported, skipping\n");
> }
>
> @@ -328,6 +340,7 @@ static data_t data;
>
> igt_main
> {
> + int i;
> enum pipe pipe;
>
> igt_fixture {
> @@ -345,51 +358,63 @@ igt_main
>
> data.pipe = pipe;
>
> - data.flags = TEST_BAD_PIXEL_FORMAT;
> - igt_subtest_f("pipe-%s-bad-pixel-format", pipe_name)
> - test_output(&data);
> + for (i = 0; i < ARRAY_SIZE(ccs_modifiers); i++) {
> + data.ccs_modifier = ccs_modifiers[i].modifier;
>
> - data.flags = TEST_BAD_ROTATION_90;
> - igt_subtest_f("pipe-%s-bad-rotation-90", pipe_name)
> - test_output(&data);
> + data.flags = TEST_BAD_PIXEL_FORMAT;
> + igt_describe("Test bad pixel format with given CCS modifier");
> + igt_subtest_f("pipe-%s-tiling-%s-bad-pixel-format", pipe_name, ccs_modifiers[i].name)
> + test_output(&data);
>
> - data.flags = TEST_CRC;
> - igt_subtest_f("pipe-%s-crc-primary-basic", pipe_name)
> - test_output(&data);
> + data.flags = TEST_BAD_ROTATION_90;
> + igt_describe("Test 90 degree rotation with given CCS modifier");
> + igt_subtest_f("pipe-%s-tiling-%s-bad-rotation-90", pipe_name, ccs_modifiers[i].name)
> + test_output(&data);
>
> - data.flags = TEST_CRC | TEST_ROTATE_180;
> - igt_subtest_f("pipe-%s-crc-primary-rotation-180", pipe_name)
> - test_output(&data);
> + data.flags = TEST_CRC;
> + igt_describe("Test primary plane CRC compatibility with given CCS modifier");
> + igt_subtest_f("pipe-%s-tiling-%s-crc-primary-basic", pipe_name, ccs_modifiers[i].name)
> + test_output(&data);
>
> - data.flags = TEST_CRC;
> - igt_subtest_f("pipe-%s-crc-sprite-planes-basic", pipe_name) {
> - int valid_tests = 0;
> + data.flags = TEST_CRC | TEST_ROTATE_180;
> + igt_describe("Test 180 degree rotation with given CCS modifier");
> + igt_subtest_f("pipe-%s-tiling-%s-crc-primary-rotation-180", pipe_name, ccs_modifiers[i].name)
> + test_output(&data);
>
> - igt_display_require_output_on_pipe(&data.display, data.pipe);
> + data.flags = TEST_CRC;
> + igt_describe("Test sprite plane CRC compatibility with given CCS modifier");
> + igt_subtest_f("pipe-%s-tiling-%s-crc-sprite-planes-basic", pipe_name, ccs_modifiers[i].name) {
> + int valid_tests = 0;
>
> - for_each_plane_on_pipe(&data.display, data.pipe, data.plane) {
> - if (data.plane->type == DRM_PLANE_TYPE_PRIMARY)
> - continue;
> - valid_tests += __test_output(&data);
> - }
> + igt_display_require_output_on_pipe(&data.display, data.pipe);
>
> - igt_require_f(valid_tests > 0,
> - "CCS not supported, skipping\n");
> - }
> + for_each_plane_on_pipe(&data.display, data.pipe, data.plane) {
> + if (data.plane->type == DRM_PLANE_TYPE_PRIMARY)
> + continue;
> + valid_tests += __test_output(&data);
> + }
>
> - data.plane = NULL;
> + igt_require_f(valid_tests > 0,
> + "CCS not supported, skipping\n");
> + }
> +
> + data.plane = NULL;
>
> - data.flags = TEST_NO_AUX_BUFFER;
> - igt_subtest_f("pipe-%s-missing-ccs-buffer", pipe_name)
> - test_output(&data);
> + data.flags = TEST_NO_AUX_BUFFER;
> + igt_describe("Test missing CCS buffer with given CCS modifier");
> + igt_subtest_f("pipe-%s-tiling-%s-missing-ccs-buffer", pipe_name, ccs_modifiers[i].name)
> + test_output(&data);
>
> - data.flags = TEST_BAD_CCS_HANDLE;
> - igt_subtest_f("pipe-%s-ccs-on-another-bo", pipe_name)
> - test_output(&data);
> + data.flags = TEST_BAD_CCS_HANDLE;
> + igt_describe("Test CCS with different BO with given modifier");
> + igt_subtest_f("pipe-%s-tiling-%s-ccs-on-another-bo", pipe_name, ccs_modifiers[i].name)
> + test_output(&data);
>
> - data.flags = TEST_BAD_AUX_STRIDE;
> - igt_subtest_f("pipe-%s-bad-aux-stride", pipe_name)
> - test_output(&data);
> + data.flags = TEST_BAD_AUX_STRIDE;
> + igt_describe("Test with bad AUX stride with given CCS modifier");
> + igt_subtest_f("pipe-%s-tiling-%s-bad-aux-stride", pipe_name, ccs_modifiers[i].name)
> + test_output(&data);
> + }
> }
>
> igt_fixture
> --
> 2.17.1
>
More information about the igt-dev
mailing list