[igt-dev] [PATCH i-g-t v3 3/4] test/perf: Add test for TGL OAR unit
Umesh Nerlige Ramappa
umesh.nerlige.ramappa at intel.com
Tue Nov 19 22:56:06 UTC 2019
Add a test that measures work using MI-RPC for the specific context
without using reports from the OA buffer.
Tigerlake introduces an OA unit that measures work specific to render
workloads. This means we do not have to rely on reports from the OA
buffer to normalize the reports obtained from MI REPORT PERF COUNT
anymore.
v2:
- Add igt_drop_root to make the test run in non-privileged mode (Lionel)
- Move parameter to __perf_open inside the same function (Lionel)
v3:
- Add description
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa at intel.com>
---
tests/perf.c | 334 +++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 334 insertions(+)
diff --git a/tests/perf.c b/tests/perf.c
index 506b64ec..f838d4ef 100644
--- a/tests/perf.c
+++ b/tests/perf.c
@@ -3600,6 +3600,334 @@ gen8_test_single_ctx_render_target_writes_a_counter(void)
} while (WEXITSTATUS(child_ret) == EAGAIN);
}
+static void gen12_single_ctx_helper(void)
+{
+ uint64_t properties[] = {
+ /* Have a random value here for the context id, but initialize
+ * it once you figure out the context ID for the work to be
+ * measured
+ */
+ DRM_I915_PERF_PROP_CTX_HANDLE, UINT64_MAX,
+
+ /* OA unit configuration:
+ * DRM_I915_PERF_PROP_SAMPLE_OA is no longer required for Gen12
+ * because the OAR unit increments counters only for the
+ * relevant context. No other parameters are needed since we do
+ * not rely on the OA buffer anymore to normalize the counter
+ * values.
+ */
+ DRM_I915_PERF_PROP_OA_METRICS_SET, test_metric_set_id,
+ DRM_I915_PERF_PROP_OA_FORMAT, test_oa_format,
+ };
+ struct drm_i915_perf_open_param param = {
+ .flags = I915_PERF_FLAG_FD_CLOEXEC,
+ .num_properties = ARRAY_SIZE(properties) / 2,
+ .properties_ptr = to_user_pointer(properties),
+ };
+ drm_intel_bufmgr *bufmgr;
+ drm_intel_context *context0, *context1;
+ struct intel_batchbuffer *batch;
+ struct igt_buf src[3], dst[3];
+ drm_intel_bo *bo;
+ uint32_t *report0_32, *report1_32, *report2_32, *report3_32;
+ uint64_t timestamp0_64, timestamp1_64;
+ uint32_t delta_ts64, delta_oa32;
+ uint64_t delta_ts64_ns, delta_oa32_ns;
+ uint32_t delta_delta;
+ int width = 800;
+ int height = 600;
+#define INVALID_CTX_ID 0xffffffff
+ uint32_t ctx0_id = INVALID_CTX_ID;
+ uint32_t ctx1_id = INVALID_CTX_ID;
+ int ret;
+ struct accumulator accumulator = {
+ .format = test_oa_format
+ };
+
+ bufmgr = drm_intel_bufmgr_gem_init(drm_fd, 4096);
+ drm_intel_bufmgr_gem_enable_reuse(bufmgr);
+
+ for (int i = 0; i < ARRAY_SIZE(src); i++) {
+ scratch_buf_init(bufmgr, &src[i], width, height, 0xff0000ff);
+ scratch_buf_init(bufmgr, &dst[i], width, height, 0x00ff00ff);
+ }
+
+ batch = intel_batchbuffer_alloc(bufmgr, devid);
+
+ context0 = drm_intel_gem_context_create(bufmgr);
+ igt_assert(context0);
+
+ context1 = drm_intel_gem_context_create(bufmgr);
+ igt_assert(context1);
+
+ igt_debug("submitting warm up render_copy\n");
+
+ /* Submit some early, unmeasured, work to the context we want
+ * to measure to try and catch issues with i915-perf
+ * initializing the HW context ID for filtering.
+ *
+ * We do this because i915-perf single context filtering had
+ * previously only relied on a hook into context pinning to
+ * initialize the HW context ID, instead of also trying to
+ * determine the HW ID while opening the stream, in case it
+ * has already been pinned.
+ *
+ * This wasn't noticed by the previous unit test because we
+ * were opening the stream while the context hadn't been
+ * touched or pinned yet and so it worked out correctly to wait
+ * for the pinning hook.
+ *
+ * Now a buggy version of i915-perf will fail to measure
+ * anything for context0 once this initial render_copy() ends
+ * up pinning the context since there won't ever be a pinning
+ * hook callback.
+ */
+ render_copy(batch, context0,
+ &src[0], 0, 0, width, height,
+ &dst[0], 0, 0);
+
+ /* Initialize the context parameter to the perf open ioctl here */
+ ret = drm_intel_gem_context_get_id(context0, &ctx0_id);
+ igt_assert_eq(ret, 0);
+ igt_assert_neq(ctx0_id, 0xffffffff);
+ properties[1] = ctx0_id;
+
+ igt_debug("opening i915-perf stream\n");
+ stream_fd = __perf_open(drm_fd, ¶m, false);
+
+ bo = drm_intel_bo_alloc(bufmgr, "mi_rpc dest bo", 4096, 64);
+
+ /* Set write domain to cpu briefly to fill the buffer with 80s */
+ ret = drm_intel_bo_map(bo, true);
+ igt_assert_eq(ret, 0);
+ memset(bo->virtual, 0x80, 2048);
+ memset(bo->virtual + 2048, 0, 2048);
+ drm_intel_bo_unmap(bo);
+
+ /* Submit an mi-rpc to context0 before measurable work */
+#define BO_TIMESTAMP_OFFSET0 1024
+#define BO_REPORT_OFFSET0 0
+#define BO_REPORT_ID0 0xdeadbeef
+ emit_stall_timestamp_and_rpc(batch,
+ bo,
+ BO_TIMESTAMP_OFFSET0,
+ BO_REPORT_OFFSET0,
+ BO_REPORT_ID0);
+ intel_batchbuffer_flush_with_context(batch, context0);
+
+ /* This is the work/context that is measured for counter increments */
+ render_copy(batch, context0,
+ &src[0], 0, 0, width, height,
+ &dst[0], 0, 0);
+ intel_batchbuffer_flush_with_context(batch, context0);
+
+ /* Submit an mi-rpc to context1 before work
+ *
+ * On gen12, this measurement should just yield counters that are
+ * all zeroes, since the counters will only increment for the
+ * context passed to perf open ioctl
+ */
+#define BO_TIMESTAMP_OFFSET2 1040
+#define BO_REPORT_OFFSET2 512
+#define BO_REPORT_ID2 0x00c0ffee
+ emit_stall_timestamp_and_rpc(batch,
+ bo,
+ BO_TIMESTAMP_OFFSET2,
+ BO_REPORT_OFFSET2,
+ BO_REPORT_ID2);
+ intel_batchbuffer_flush_with_context(batch, context1);
+
+ /* Submit two copies on the other context to avoid a false
+ * positive in case the driver somehow ended up filtering for
+ * context1
+ */
+ render_copy(batch, context1,
+ &src[1], 0, 0, width, height,
+ &dst[1], 0, 0);
+ ret = drm_intel_gem_context_get_id(context1, &ctx1_id);
+ igt_assert_eq(ret, 0);
+ igt_assert_neq(ctx1_id, 0xffffffff);
+
+ render_copy(batch, context1,
+ &src[2], 0, 0, width, height,
+ &dst[2], 0, 0);
+ intel_batchbuffer_flush_with_context(batch, context1);
+
+ /* Submit an mi-rpc to context1 after all work */
+#define BO_TIMESTAMP_OFFSET3 1048
+#define BO_REPORT_OFFSET3 768
+#define BO_REPORT_ID3 0x01c0ffee
+ emit_stall_timestamp_and_rpc(batch,
+ bo,
+ BO_TIMESTAMP_OFFSET3,
+ BO_REPORT_OFFSET3,
+ BO_REPORT_ID3);
+ intel_batchbuffer_flush_with_context(batch, context1);
+
+ /* Submit an mi-rpc to context0 after all measurable work */
+#define BO_TIMESTAMP_OFFSET1 1032
+#define BO_REPORT_OFFSET1 256
+#define BO_REPORT_ID1 0xbeefbeef
+ emit_stall_timestamp_and_rpc(batch,
+ bo,
+ BO_TIMESTAMP_OFFSET1,
+ BO_REPORT_OFFSET1,
+ BO_REPORT_ID1);
+ intel_batchbuffer_flush_with_context(batch, context0);
+
+ /* Set write domain to none */
+ ret = drm_intel_bo_map(bo, false);
+ igt_assert_eq(ret, 0);
+
+ /* Sanity check reports
+ * reportX_32[0]: report id passed with mi-rpc
+ * reportX_32[1]: timestamp
+ * reportX_32[2]: context id
+ *
+ * report0_32: start of measurable work
+ * report1_32: end of measurable work
+ * report2_32: start of other work
+ * report3_32: end of other work
+ */
+ report0_32 = bo->virtual;
+ igt_assert_eq(report0_32[0], 0xdeadbeef);
+ igt_assert_neq(report0_32[1], 0);
+ ctx0_id = report0_32[2];
+ igt_debug("MI_RPC(start) CTX ID: %u\n", ctx0_id);
+ dump_report(report0_32, 64, "report0_32");
+
+ report1_32 = report0_32 + 64;
+ igt_assert_eq(report1_32[0], 0xbeefbeef);
+ igt_assert_neq(report1_32[1], 0);
+ ctx1_id = report1_32[2];
+ dump_report(report1_32, 64, "report1_32");
+
+ /* Verify that counters in context1 are all zeroes */
+ report2_32 = report0_32 + 128;
+ igt_assert_eq(report2_32[0], 0x00c0ffee);
+ igt_assert_neq(report2_32[1], 0);
+ dump_report(report2_32, 64, "report2_32");
+ igt_assert_eq(0, memcmp(&report2_32[4],
+ bo->virtual + 2048,
+ 240));
+
+ report3_32 = report0_32 + 192;
+ igt_assert_eq(report3_32[0], 0x01c0ffee);
+ igt_assert_neq(report3_32[1], 0);
+ dump_report(report3_32, 64, "report3_32");
+ igt_assert_eq(0, memcmp(&report3_32[4],
+ bo->virtual + 2048,
+ 240));
+
+ /* Accumulate deltas for counters - A0, A21 and A26 */
+ memset(accumulator.deltas, 0, sizeof(accumulator.deltas));
+ accumulate_reports(&accumulator, report0_32, report1_32);
+ igt_debug("total: A0 = %"PRIu64", A21 = %"PRIu64", A26 = %"PRIu64"\n",
+ accumulator.deltas[2 + 0],
+ accumulator.deltas[2 + 21],
+ accumulator.deltas[2 + 26]);
+
+ igt_debug("oa_timestamp32 0 = %u\n", report0_32[1]);
+ igt_debug("oa_timestamp32 1 = %u\n", report1_32[1]);
+ igt_debug("ctx_id 0 = %u\n", report0_32[2]);
+ igt_debug("ctx_id 1 = %u\n", report1_32[2]);
+
+ /* The delta as calculated via the PIPE_CONTROL timestamp or
+ * the OA report timestamps should be almost identical but
+ * allow a 500 nanoseconds margin.
+ */
+ timestamp0_64 = *(uint64_t *)(((uint8_t *)bo->virtual) + BO_TIMESTAMP_OFFSET0);
+ timestamp1_64 = *(uint64_t *)(((uint8_t *)bo->virtual) + BO_TIMESTAMP_OFFSET1);
+
+ igt_debug("ts_timestamp64 0 = %"PRIu64"\n", timestamp0_64);
+ igt_debug("ts_timestamp64 1 = %"PRIu64"\n", timestamp1_64);
+
+ delta_ts64 = timestamp1_64 - timestamp0_64;
+ delta_oa32 = report1_32[1] - report0_32[1];
+
+ /* Sanity check that we can pass the delta to timebase_scale */
+ igt_assert(delta_ts64 < UINT32_MAX);
+ delta_oa32_ns = timebase_scale(delta_oa32);
+ delta_ts64_ns = timebase_scale(delta_ts64);
+
+ igt_debug("oa32 delta = %u, = %uns\n",
+ delta_oa32, (unsigned)delta_oa32_ns);
+ igt_debug("ts64 delta = %u, = %uns\n",
+ delta_ts64, (unsigned)delta_ts64_ns);
+
+ delta_delta = delta_ts64_ns > delta_oa32_ns ?
+ (delta_ts64_ns - delta_oa32_ns) :
+ (delta_oa32_ns - delta_ts64_ns);
+ if (delta_delta > 500) {
+ igt_debug("delta_delta exceeds margin, skipping..\n");
+ exit(EAGAIN);
+ }
+
+ igt_debug("n samples written = %"PRIu64"/%"PRIu64" (%ix%i)\n",
+ accumulator.deltas[2 + 21],
+ accumulator.deltas[2 + 26],
+ width, height);
+ accumulator_print(&accumulator, "filtered");
+
+ /* Verify that the work actually happened by comparing the src
+ * and dst buffers
+ */
+ ret = drm_intel_bo_map(src[0].bo, false);
+ igt_assert_eq(ret, 0);
+ ret = drm_intel_bo_map(dst[0].bo, false);
+ igt_assert_eq(ret, 0);
+
+ ret = memcmp(src[0].bo->virtual, dst[0].bo->virtual, 4 * width * height);
+ if (ret != 0) {
+ accumulator_print(&accumulator, "total");
+ exit(EAGAIN);
+ }
+
+ drm_intel_bo_unmap(src[0].bo);
+ drm_intel_bo_unmap(dst[0].bo);
+
+ /* Check that this test passed. The test measures the number of 2x2
+ * samples written to the render target using the counter A26. For
+ * OAR, this counter will only have increments relevant to this specific
+ * context. The value equals the width * height of the rendered work.
+ */
+ igt_assert_eq(accumulator.deltas[2 + 26], width * height);
+
+ /* Clean up */
+ for (int i = 0; i < ARRAY_SIZE(src); i++) {
+ drm_intel_bo_unreference(src[i].bo);
+ drm_intel_bo_unreference(dst[i].bo);
+ }
+
+ drm_intel_bo_unmap(bo);
+ drm_intel_bo_unreference(bo);
+ intel_batchbuffer_free(batch);
+ drm_intel_gem_context_destroy(context0);
+ drm_intel_gem_context_destroy(context1);
+ drm_intel_bufmgr_destroy(bufmgr);
+ __perf_close(stream_fd);
+}
+
+static void
+gen12_test_single_ctx_render_target_writes_a_counter(void)
+{
+ int child_ret;
+ struct igt_helper_process child = {};
+
+ /* Ensure perf_stream_paranoid is set to 1 by default */
+ write_u64_file("/proc/sys/dev/i915/perf_stream_paranoid", 1);
+
+ do {
+ igt_fork_helper(&child) {
+ igt_drop_root();
+ gen12_single_ctx_helper();
+ }
+ child_ret = igt_wait_helper(&child);
+ igt_assert(WEXITSTATUS(child_ret) == EAGAIN ||
+ WEXITSTATUS(child_ret) == 0);
+ } while (WEXITSTATUS(child_ret) == EAGAIN);
+}
+
static unsigned long rc6_residency_ms(void)
{
return sysfs_read("power/rc6_residency_ms");
@@ -4225,6 +4553,12 @@ igt_main
gen8_test_single_ctx_render_target_writes_a_counter();
}
+ igt_subtest("gen12-unprivileged-single-ctx-counters") {
+ igt_describe("Measure performance for a specific context using OAR in Gen 12");
+ igt_require(intel_gen(devid) >= 12);
+ gen12_test_single_ctx_render_target_writes_a_counter();
+ }
+
igt_subtest("rc6-disable")
test_rc6_disable();
--
2.23.0
More information about the igt-dev
mailing list