[igt-dev] [PATCH i-g-t v13 2/6] tests/i915/i915_pm_dc: Added new test to verify Display C States
Anshuman Gupta
anshuman.gupta at intel.com
Sun Sep 1 14:19:57 UTC 2019
From: Jyoti Yadav <jyoti.r.yadav at intel.com>
Currently this test validates DC5 upon PSR entry for supported platforms.
Added new file for compilation inside Makefile and Meson.
v2: Used the debugfs entry for DC counters instead of Registers.
Used shorter names for variables.
Introduced timeout to read DC counters.
v3: one second timeout is introduced to read DC counters.
Skip the subtest if counters are not available for that platform.
v4: Rebased, to fix compilation error in psr_enable(), psr_wait_entry()
and replaced igt_display_init() by igt_display_require() in pm_rpm.c.
Addressed the review comment by removing unused function display_init,
removing redundant igt commit suggested by Imre.
Fixed typo in read_dc_counter().
v5: Addressed the review comment by removing redundant read_dc_counter(),
clubbed cleanup() function in test_dc_state_psr() suggested by Imre.
Rearranged preprocessor directives at one place.
Fixed compilation warning by adding function prototype for
dc_state_wait_entry() and check_dc_counter().
Listing actual change in patch set changelog to make review easier.
v6: Fixed "i915_edp_psr_status" string to "Sink support: yes".
v7: Rebased since test name changed from "pm_dc" to "i915_pm_dc",
this will align with other PM tests.
also changed the DC5/6 counter check timeout to 3 second.
v8: On few platform SATA i/p is blocking deeper package C states.
used igt_pm_enable_sata_link_power_management() function in order
to use min_power policy.
v9: Removed redundant igt_pm_remove_sata_link_power_management()
as sata link policy values will be restored by exit handler.
v10: changed cleanup() to cleanup_dc_psr() symmetric to cleanup_dc_dpms().
Signed-off-by: Jyoti Yadav <jyoti.r.yadav at intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta at intel.com>
---
tests/Makefile.sources | 3 +
tests/i915/i915_pm_dc.c | 211 ++++++++++++++++++++++++++++++++++++++++
tests/meson.build | 1 +
3 files changed, 215 insertions(+)
create mode 100644 tests/i915/i915_pm_dc.c
diff --git a/tests/Makefile.sources b/tests/Makefile.sources
index c02e4d94..ebaf75f8 100644
--- a/tests/Makefile.sources
+++ b/tests/Makefile.sources
@@ -507,6 +507,9 @@ i915_pm_rc6_residency_SOURCES = i915/i915_pm_rc6_residency.c
TESTS_progs += i915_pm_rpm
i915_pm_rpm_SOURCES = i915/i915_pm_rpm.c
+TESTS_progs += i915_pm_dc
+i915_pm_dc_SOURCES = i915/i915_pm_dc.c
+
TESTS_progs += i915_pm_rps
i915_pm_rps_SOURCES = i915/i915_pm_rps.c
diff --git a/tests/i915/i915_pm_dc.c b/tests/i915/i915_pm_dc.c
new file mode 100644
index 00000000..10e4efbd
--- /dev/null
+++ b/tests/i915/i915_pm_dc.c
@@ -0,0 +1,211 @@
+/*
+ * Copyright © 2018 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+
+#include "igt.h"
+#include "igt_sysfs.h"
+#include "igt_psr.h"
+#include <errno.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <string.h>
+#include "intel_bufmgr.h"
+#include "intel_io.h"
+#include "limits.h"
+
+/* DC State Flags */
+#define CHECK_DC5 1
+#define CHECK_DC6 2
+
+typedef struct {
+ int drm_fd;
+ int debugfs_fd;
+ uint32_t devid;
+ igt_display_t display;
+ struct igt_fb fb_white;
+ enum psr_mode op_psr_mode;
+ drmModeModeInfo *mode;
+ igt_output_t *output;
+} data_t;
+
+static bool dc_state_wait_entry(int drm_fd, int dc_flag, int prev_dc_count);
+static void check_dc_counter(int drm_fd, int dc_flag, uint32_t prev_dc_count);
+
+static void setup_output(data_t *data)
+{
+ igt_display_t *display = &data->display;
+ igt_output_t *output;
+ enum pipe pipe;
+
+ for_each_pipe_with_valid_output(display, pipe, output) {
+ drmModeConnectorPtr c = output->config.connector;
+
+ if (c->connector_type != DRM_MODE_CONNECTOR_eDP)
+ continue;
+
+ igt_output_set_pipe(output, pipe);
+ data->output = output;
+ data->mode = igt_output_get_mode(output);
+
+ return;
+ }
+}
+
+static void display_fini(data_t *data)
+{
+ igt_display_fini(&data->display);
+}
+
+static bool edp_psr_sink_support(data_t *data)
+{
+ char buf[512];
+
+ igt_debugfs_simple_read(data->debugfs_fd, "i915_edp_psr_status",
+ buf, sizeof(buf));
+
+ return strstr(buf, "Sink support: yes");
+}
+
+static void cleanup_dc_psr(data_t *data)
+{
+ igt_plane_t *primary;
+
+ primary = igt_output_get_plane_type(data->output,
+ DRM_PLANE_TYPE_PRIMARY);
+ igt_plane_set_fb(primary, NULL);
+ igt_display_commit(&data->display);
+ igt_remove_fb(data->drm_fd, &data->fb_white);
+}
+
+static void setup_primary(data_t *data)
+{
+ igt_plane_t *primary;
+
+ primary = igt_output_get_plane_type(data->output,
+ DRM_PLANE_TYPE_PRIMARY);
+ igt_plane_set_fb(primary, NULL);
+ igt_create_color_fb(data->drm_fd,
+ data->mode->hdisplay, data->mode->vdisplay,
+ DRM_FORMAT_XRGB8888,
+ LOCAL_I915_FORMAT_MOD_X_TILED,
+ 1.0, 1.0, 1.0,
+ &data->fb_white);
+ igt_plane_set_fb(primary, &data->fb_white);
+ igt_display_commit(&data->display);
+}
+
+static uint32_t get_dc_counter(char *dc_data)
+{
+ char *e;
+ long ret;
+ char *s = strchr(dc_data, ':');
+
+ assert(s);
+ s++;
+ ret = strtol(s, &e, 10);
+ assert(((ret != LONG_MIN && ret != LONG_MAX) || errno != ERANGE) &&
+ e > s && *e == '\n' && ret >= 0);
+ return ret;
+}
+
+static uint32_t read_dc_counter(uint32_t drm_fd, int dc_flag)
+{
+ char buf[4096];
+ char *str;
+
+ igt_debugfs_read(drm_fd, "i915_dmc_info", buf);
+
+ if (dc_flag & CHECK_DC5)
+ str = strstr(buf, "DC3 -> DC5 count");
+ else if (dc_flag & CHECK_DC6)
+ str = strstr(buf, "DC5 -> DC6 count");
+
+ /* Check DC5/DC6 counter is available for the platform.
+ * Skip the test if counter is not available.
+ */
+ igt_skip_on_f(!str, "DC%d counter is not available\n",
+ dc_flag & CHECK_DC5 ? 5 : 6);
+ return get_dc_counter(str);
+}
+
+static bool dc_state_wait_entry(int drm_fd, int dc_flag, int prev_dc_count)
+{
+ return igt_wait(read_dc_counter(drm_fd, dc_flag) >
+ prev_dc_count, 3000, 100);
+}
+
+static void check_dc_counter(int drm_fd, int dc_flag, uint32_t prev_dc_count)
+{
+ igt_assert_f(dc_state_wait_entry(drm_fd, dc_flag, prev_dc_count),
+ "DC%d state is not achieved\n",
+ dc_flag & CHECK_DC5 ? 5 : 6);
+}
+
+static void test_dc_state_psr(data_t *data, int dc_flag)
+{
+ uint32_t dc_counter_before_psr;
+
+ dc_counter_before_psr = read_dc_counter(data->drm_fd, dc_flag);
+ setup_output(data);
+ setup_primary(data);
+ igt_assert(psr_wait_entry(data->debugfs_fd, data->op_psr_mode));
+ check_dc_counter(data->drm_fd, dc_flag, dc_counter_before_psr);
+ cleanup_dc_psr(data);
+}
+
+int main(int argc, char *argv[])
+{
+ bool has_runtime_pm;
+ data_t data = {};
+
+ igt_skip_on_simulation();
+ igt_subtest_init(argc, argv);
+ igt_fixture {
+ data.drm_fd = drm_open_driver_master(DRIVER_INTEL);
+ data.debugfs_fd = igt_debugfs_dir(data.drm_fd);
+ igt_require(data.debugfs_fd != -1);
+ kmstest_set_vt_graphics_mode();
+ data.devid = intel_get_drm_devid(data.drm_fd);
+ igt_pm_enable_sata_link_power_management();
+ has_runtime_pm = igt_setup_runtime_pm();
+ igt_info("Runtime PM support: %d\n", has_runtime_pm);
+ igt_require(has_runtime_pm);
+ igt_require(igt_pm_dmc_loaded(data.debugfs_fd));
+ igt_display_require(&data.display, data.drm_fd);
+ }
+
+ igt_subtest("dc5-psr") {
+ data.op_psr_mode = PSR_MODE_1;
+ psr_enable(data.debugfs_fd, data.op_psr_mode);
+ igt_require_f(edp_psr_sink_support(&data),
+ "Sink does not support PSR\n");
+ test_dc_state_psr(&data, CHECK_DC5);
+ }
+
+ igt_fixture {
+ close(data.debugfs_fd);
+ display_fini(&data);
+ }
+
+ igt_exit();
+}
diff --git a/tests/meson.build b/tests/meson.build
index a7b2b322..f85deba1 100644
--- a/tests/meson.build
+++ b/tests/meson.build
@@ -230,6 +230,7 @@ i915_progs = [
'i915_pm_lpsp',
'i915_pm_rc6_residency',
'i915_pm_rpm',
+ 'i915_pm_dc',
'i915_pm_rps',
'i915_pm_sseu',
'i915_query',
--
2.21.0
More information about the igt-dev
mailing list