[igt-dev] [PATCH i-g-t v14 4/6] tests/i915/i915_pm_dc: Added test for DC5 during DPMS
Anshuman Gupta
anshuman.gupta at intel.com
Wed Sep 4 17:51:07 UTC 2019
From: Jyoti Yadav <jyoti.r.yadav at intel.com>
Added new subtest for DC5 entry during DPMS on/off cycle.
During DPMS on/off cycle DC5 counter is incremented.
v2: Rename the subtest with meaningful name.
v3: Rebased.
v4: Addressed review comments by removing leftover code
cleanup().
v5: Addressed the review comment by removing redundant
read_dc_counter() suggested by Imre.
Listing actual change in patch set changelog to make review easier.
v6: Three way patch applied, no functional change.
v7: Disabling runtime suspend for the platform which support, DC9.
rebased due to test name pm_dc changed to i915_pm_dc, aligning to
other PM tests.
v8: Introduced setup_dc_dpms() in order to disable runtime pm, restoring
POWER_DIR values to its original and enabling runtime pm for other
followed sub-tests.
v9: Check DC5 counter value after DPMS off, broke the dpms_on_off
function to dpms_on and dpms_off. [Imre]
v10:Added AT_LEAST_Gen11 condition instead of IS_ICELAKE in order to
disable runtime suspend. [Imre]
v11:Added a cleanup_dc_dpms() function. [Imre]
Signed-off-by: Jyoti Yadav <jyoti.r.yadav at intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta at intel.com>
Reviewed-by: Imre Deak <imre.deak at intel.com>
---
tests/i915/i915_pm_dc.c | 66 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 66 insertions(+)
diff --git a/tests/i915/i915_pm_dc.c b/tests/i915/i915_pm_dc.c
index 8e4f1da4..c3df2c68 100644
--- a/tests/i915/i915_pm_dc.c
+++ b/tests/i915/i915_pm_dc.c
@@ -44,6 +44,7 @@ typedef struct {
enum psr_mode op_psr_mode;
drmModeModeInfo *mode;
igt_output_t *output;
+ bool runtime_suspend_disabled;
} data_t;
static bool dc_state_wait_entry(int drm_fd, int dc_flag, int prev_dc_count);
@@ -171,6 +172,67 @@ static void test_dc_state_psr(data_t *data, int dc_flag)
cleanup_dc_psr(data);
}
+static void cleanup_dc_dpms(data_t *data)
+{
+ /*
+ * if runtime PM is disabled for i915 restore it,
+ * so any other sub-test can use runtime-PM.
+ */
+ if (data->runtime_suspend_disabled) {
+ igt_restore_runtime_pm();
+ igt_setup_runtime_pm();
+ }
+}
+
+static void setup_dc_dpms(data_t *data)
+{
+ if (IS_BROXTON(data->devid) || IS_GEMINILAKE(data->devid) ||
+ AT_LEAST_GEN(data->devid, 11)) {
+ igt_disable_runtime_pm();
+ data->runtime_suspend_disabled = true;
+ } else {
+ data->runtime_suspend_disabled = false;
+ }
+}
+
+static void dpms_off(data_t *data)
+{
+ for (int i = 0; i < data->display.n_outputs; i++) {
+ kmstest_set_connector_dpms(data->drm_fd,
+ data->display.outputs[i].config.connector,
+ DRM_MODE_DPMS_OFF);
+ }
+
+ if (!data->runtime_suspend_disabled)
+ igt_assert(igt_wait_for_pm_status
+ (IGT_RUNTIME_PM_STATUS_SUSPENDED));
+}
+
+static void dpms_on(data_t *data)
+{
+ for (int i = 0; i < data->display.n_outputs; i++) {
+ kmstest_set_connector_dpms(data->drm_fd,
+ data->display.outputs[i].config.connector,
+ DRM_MODE_DPMS_ON);
+ }
+
+ if (!data->runtime_suspend_disabled)
+ igt_assert(igt_wait_for_pm_status
+ (IGT_RUNTIME_PM_STATUS_ACTIVE));
+}
+
+static void test_dc_state_dpms(data_t *data, int dc_flag)
+{
+ uint32_t dc_counter;
+
+ setup_dc_dpms(data);
+ dc_counter = read_dc_counter(data->drm_fd, dc_flag);
+ dpms_off(data);
+ check_dc_counter(data->drm_fd, dc_flag, dc_counter);
+ dpms_on(data);
+ cleanup_dc_dpms(data);
+}
+
int main(int argc, char *argv[])
{
bool has_runtime_pm;
@@ -208,6 +270,10 @@ int main(int argc, char *argv[])
test_dc_state_psr(&data, CHECK_DC6);
}
+ igt_subtest("dc5-dpms") {
+ test_dc_state_dpms(&data, CHECK_DC5);
+ }
+
igt_fixture {
close(data.debugfs_fd);
display_fini(&data);
--
2.21.0
More information about the igt-dev
mailing list