[igt-dev] [PATCH i-g-t 3/3] kms_busy: Replace fiddling with hangcheck modparam with explicit fence
Chris Wilson
chris at chris-wilson.co.uk
Wed Sep 11 10:15:01 UTC 2019
Use an explicit fence to circumvent the [i915] GPU hang detection rather
than tweak the i915 specific modparam (and remove the assertion that
such a param exists). Note, that with a bit more work, the fence could
be used be directly rather than via dirtying the fb with a dummyload.
Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
---
lib/igt_dummyload.c | 5 +++++
lib/igt_dummyload.h | 10 ++++++----
tests/kms_busy.c | 26 ++++++++++----------------
3 files changed, 21 insertions(+), 20 deletions(-)
diff --git a/lib/igt_dummyload.c b/lib/igt_dummyload.c
index 0e06276af..65b5cc927 100644
--- a/lib/igt_dummyload.c
+++ b/lib/igt_dummyload.c
@@ -236,6 +236,11 @@ emit_recursive_batch(igt_spin_t *spin,
if (opts->flags & IGT_SPIN_FENCE_OUT)
execbuf->flags |= I915_EXEC_FENCE_OUT;
+ if (opts->flags & IGT_SPIN_FENCE_IN) {
+ execbuf->flags |= I915_EXEC_FENCE_IN;
+ execbuf->rsvd2 = opts->fence;
+ }
+
for (i = 0; i < nengine; i++) {
execbuf->flags &= ~ENGINE_MASK;
execbuf->flags |= flags[i];
diff --git a/lib/igt_dummyload.h b/lib/igt_dummyload.h
index bb25751ad..66837057d 100644
--- a/lib/igt_dummyload.h
+++ b/lib/igt_dummyload.h
@@ -54,12 +54,14 @@ struct igt_spin_factory {
uint32_t dependency;
unsigned int engine;
unsigned int flags;
+ int fence;
};
-#define IGT_SPIN_FENCE_OUT (1 << 0)
-#define IGT_SPIN_POLL_RUN (1 << 1)
-#define IGT_SPIN_FAST (1 << 2)
-#define IGT_SPIN_NO_PREEMPTION (1 << 3)
+#define IGT_SPIN_FENCE_IN (1 << 0)
+#define IGT_SPIN_FENCE_OUT (1 << 1)
+#define IGT_SPIN_POLL_RUN (1 << 2)
+#define IGT_SPIN_FAST (1 << 3)
+#define IGT_SPIN_NO_PREEMPTION (1 << 4)
igt_spin_t *
__igt_spin_factory(int fd, const struct igt_spin_factory *opts);
diff --git a/tests/kms_busy.c b/tests/kms_busy.c
index 7e5ab3d19..bfb3857f4 100644
--- a/tests/kms_busy.c
+++ b/tests/kms_busy.c
@@ -75,22 +75,16 @@ static void flip_to_fb(igt_display_t *dpy, int pipe,
struct pollfd pfd = { .fd = dpy->drm_fd, .events = POLLIN };
const int timeout = modeset ? 8500 : 100;
struct drm_event_vblank ev;
+ IGT_CORK_FENCE(cork);
+ igt_spin_t *t;
+ int fence;
- igt_spin_t *t = igt_spin_new(dpy->drm_fd,
- .engine = ring,
- .dependency = fb->gem_handle);
-
- if (modeset) {
- /*
- * We want to check that a modeset actually waits for the
- * spin batch to complete, but we keep a bigger timeout for
- * disable than required for flipping.
- *
- * As a result, the GPU reset code may kick in, which we neuter
- * here to be sure there's no premature completion.
- */
- igt_set_module_param_int("enable_hangcheck", 0);
- }
+ fence = igt_cork_plug(&cork, dpy->drm_fd);
+ t = igt_spin_new(dpy->drm_fd,
+ .engine = ring,
+ .fence = fence,
+ .dependency = fb->gem_handle,
+ .flags = IGT_SPIN_FENCE_IN | IGT_SPIN_NO_PREEMPTION);
igt_fork(child, 1) {
igt_assert(gem_bo_busy(dpy->drm_fd, fb->gem_handle));
@@ -116,13 +110,13 @@ static void flip_to_fb(igt_display_t *dpy, int pipe,
igt_waitchildren_timeout(5 * timeout,
"flip blocked waiting for busy bo\n");
igt_spin_end(t);
+ close(fence);
igt_assert(read(dpy->drm_fd, &ev, sizeof(ev)) == sizeof(ev));
igt_assert(poll(&pfd, 1, 0) == 0);
if (modeset) {
gem_quiescent_gpu(dpy->drm_fd);
- igt_set_module_param_int("enable_hangcheck", 1);
/* Clear old mode blob. */
igt_pipe_refresh(dpy, pipe, true);
--
2.23.0
More information about the igt-dev
mailing list