[igt-dev] [PATCH i-g-t v4] igt/tests/kms_dp_tiled_display: kms test for display port tiled displays
Manasi Navare
manasi.d.navare at intel.com
Thu Sep 12 23:28:30 UTC 2019
From: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep at intel.com>
This test validates the tiled DP displays to display a test pattern
seamlessly across the two tiles. It validates the transcoder port
sync feature on i915 to get a tearfree tiled display output.
Related kernel work patches-
https://patchwork.freedesktop.org/series/66403/
This test can eventually be extended to cover tiled display support
on other connector types.
v4:
* Add the logic to check there are
page flips per connector (Simon)
* Calloc instead of malloc to initialize (Manasi)
v3:
* Fix the pointer leaks (Simon)
* Code indentation (Manasi)
* Compare two consecutive flip timestamps (Simon)
* Use single fb across tiles (Simon)
* Fix reset mode logic (Manasi)
v2: Added a check for checking pageflip event timestamps (Simon, Manasi)
Minor style changes (Simon)
Code clean-up and reordering
Cc: Manasi Navare <manasi.d.navare at intel.com>
Cc: Petri Latvala <petri.latvala at intel.com>
Cc: Simon Ser <simon.ser at intel.com>
Cc: <madhumitha.tp at gmail.com>
Signed-off-by: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep at intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
---
tests/Makefile.sources | 1 +
tests/kms_dp_tiled_display.c | 397 +++++++++++++++++++++++++++++++++++
tests/meson.build | 1 +
3 files changed, 399 insertions(+)
create mode 100644 tests/kms_dp_tiled_display.c
diff --git a/tests/Makefile.sources b/tests/Makefile.sources
index c02e4d94..7561ab9b 100644
--- a/tests/Makefile.sources
+++ b/tests/Makefile.sources
@@ -41,6 +41,7 @@ TESTS_progs = \
kms_cursor_edge_walk \
kms_cursor_legacy \
kms_dp_dsc \
+ kms_dp_tiled_display \
kms_draw_crc \
kms_fbcon_fbt \
kms_fence_pin_leak \
diff --git a/tests/kms_dp_tiled_display.c b/tests/kms_dp_tiled_display.c
new file mode 100644
index 00000000..3055c6c3
--- /dev/null
+++ b/tests/kms_dp_tiled_display.c
@@ -0,0 +1,397 @@
+/*
+ * Copyright © 2018 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ * Madhumitha Tolakanahalli Pradeep
+ * <madhumitha.tolakanahalli.pradeep at intel.com>
+ * Manasi Navare <manasi.d.navare at intel.com>
+ *
+ * Display Port Tiled Display Test
+ * This test parses the tile information of the connectors that have TILE
+ * property set, sets up the framebuffer with correct offsets corresponding to
+ * the tile offsets and does an atomic modeset with two CRTCs for two
+ * connectors. Page flip event timestamp from each CRTC is collected and
+ * compared to make sure that they occurred in a synchronous manner.
+ *
+ * This test currently supports only horizontally tiled displays, in line with
+ * the displays supported by the kernel at the moment.
+ */
+
+#include "igt.h"
+#include "poll.h"
+#include "drm_mode.h"
+#include "drm_fourcc.h"
+
+IGT_TEST_DESCRIPTION("Test for Transcoder Port Sync for Display Port Tiled Displays");
+
+typedef struct {
+ igt_output_t *output;
+ igt_tile_info_t tile;
+ enum pipe pipe;
+ drmModeConnectorPtr connector;
+ bool got_page_flip;
+} data_connector_t;
+
+typedef struct {
+ int drm_fd;
+ int num_h_tiles;
+ igt_fb_t fb_test_pattern;
+ igt_display_t *display;
+ data_connector_t *conns;
+ enum igt_commit_style commit;
+} data_t;
+
+static int drm_property_is_tile(drmModePropertyPtr prop)
+{
+ return (strcmp(prop->name, "TILE") ? 0 : 1) &&
+ drm_property_type_is(prop, DRM_MODE_PROP_BLOB);
+}
+
+static void get_connector_tile_props(data_t *data, drmModeConnectorPtr conn,
+ igt_tile_info_t *tile)
+{
+ int i = 0;
+ drmModePropertyPtr prop;
+ drmModePropertyBlobPtr blob;
+
+ for (i = 0; i < conn->count_props; i++) {
+ prop = drmModeGetProperty(data->drm_fd, conn->props[i]);
+
+ igt_assert(prop);
+
+ if (!drm_property_is_tile(prop)) {
+ drmModeFreeProperty(prop);
+ continue;
+ }
+
+ blob = drmModeGetPropertyBlob(data->drm_fd,
+ conn->prop_values[i]);
+
+ if (!blob)
+ goto cleanup;
+
+ igt_parse_connector_tile_blob(blob, tile);
+ break;
+ }
+
+cleanup:
+ drmModeFreeProperty(prop);
+ drmModeFreePropertyBlob(blob);
+}
+
+static void get_number_of_h_tiles(data_t *data)
+{
+ int i;
+ drmModeResPtr res;
+ drmModeConnectorPtr connector;
+ igt_tile_info_t tile = {.num_h_tile = 0};
+
+ igt_assert(res = drmModeGetResources(data->drm_fd));
+
+ for (i = 0; i < res->count_connectors; i++) {
+ connector = drmModeGetConnectorCurrent(data->drm_fd,
+ res->connectors[i]);
+
+ igt_assert(connector);
+
+ if (connector->connection != DRM_MODE_CONNECTED ||
+ connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort) {
+ drmModeFreeConnector(connector);
+ continue;
+ }
+
+ get_connector_tile_props(data, connector, &tile);
+ data->num_h_tiles = tile.num_h_tile;
+ break;
+ }
+
+ drmModeFreeResources(res);
+ drmModeFreeConnector(connector);
+}
+
+static void get_connectors(data_t *data)
+{
+ int count = 0;
+ igt_output_t *output;
+ data_connector_t *conns = data->conns;
+
+ for_each_connected_output(data->display, output) {
+ conns[count].connector = drmModeGetConnector(data->display->drm_fd,
+ output->id);
+
+ igt_assert(conns[count].connector);
+
+ if (conns[count].connector->connector_type !=
+ DRM_MODE_CONNECTOR_DisplayPort) {
+ drmModeFreeConnector(conns[count].connector);
+ continue;
+ }
+
+ get_connector_tile_props(data, conns[count].connector,
+ &conns[count].tile);
+
+ /* Check if the connectors belong to the same tile group */
+ if (count > 0)
+ igt_assert(conns[count].tile.tile_group_id ==
+ conns[count-1].tile.tile_group_id);
+
+ count++;
+ }
+}
+
+static void
+reset_plane(igt_output_t *output)
+{
+ igt_plane_t *primary;
+
+ primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
+ igt_plane_set_fb(primary, NULL);
+}
+
+static void reset_output(igt_output_t *output)
+{
+ igt_output_set_pipe(output, PIPE_NONE);
+}
+
+static void reset_mode(data_t *data)
+{
+ int count;
+ igt_output_t *output;
+ data_connector_t *conns = data->conns;
+
+ for (count = 0; count < data->num_h_tiles; count++) {
+ output = igt_output_from_connector(data->display,
+ conns[count].connector);
+ igt_output_set_pipe(output, PIPE_NONE);
+ }
+ igt_display_commit2(data->display, data->commit);
+}
+
+static void test_cleanup(data_t *data)
+{
+ int count;
+ data_connector_t *conns = data->conns;
+
+ for (count = 0; count < data->num_h_tiles; count++) {
+ if (conns[count].output) {
+ reset_plane(conns[count].output);
+ reset_output(conns[count].output);
+ }
+ }
+ igt_remove_fb(data->drm_fd, &data->fb_test_pattern);
+ igt_display_commit2(data->display, data->commit);
+ memset(conns, 0, sizeof(data_connector_t) * data->num_h_tiles);
+}
+
+static void setup_mode(data_t *data)
+{
+ int count = 0;
+ enum pipe pipe;
+ igt_output_t *output;
+ data_connector_t *conns = data->conns;
+
+ /*
+ * The output is set to PIPE_NONE and then assigned a pipe.
+ * This is done to ensure a complete modeset occures every
+ * time the test is run.
+ */
+ reset_mode(data);
+
+ for (count = 0; count < data->num_h_tiles; count++) {
+ output = igt_output_from_connector(data->display,
+ conns[count].connector);
+
+ for_each_pipe(data->display, pipe) {
+ if (count > 0 && pipe == conns[count-1].pipe)
+ continue;
+
+ if (igt_pipe_connector_valid(pipe, output)) {
+
+ conns[count].pipe = pipe;
+ conns[count].output = output;
+
+ igt_output_set_pipe(conns[count].output,
+ conns[count].pipe);
+ break;
+ }
+ }
+ }
+ igt_display_commit_atomic(data->display, DRM_MODE_ATOMIC_ALLOW_MODESET,
+ NULL);
+}
+
+static void setup_framebuffer(data_t *data)
+{
+ int count;
+ igt_plane_t *primary;
+ int fb_h_size = 0, fb_v_size = 0;
+ data_connector_t *conns = data->conns;
+
+ for (count = 0; count < data->num_h_tiles; count++) {
+
+ fb_h_size += conns[count].tile.tile_h_size;
+ /* We support only horizontal tiles, so vertical size is same
+ * for all tiles and needs to be assigned only once.
+ */
+ if (!fb_v_size)
+ fb_v_size = conns[count].tile.tile_v_size;
+ }
+
+ igt_create_pattern_fb(data->drm_fd,
+ fb_h_size,
+ fb_v_size,
+ DRM_FORMAT_XBGR8888,
+ LOCAL_DRM_FORMAT_MOD_NONE,
+ &data->fb_test_pattern);
+
+ for (count = 0; count < data->num_h_tiles; count++) {
+
+ primary = igt_output_get_plane_type(conns[count].output,
+ DRM_PLANE_TYPE_PRIMARY);
+
+ igt_plane_set_fb(primary, &data->fb_test_pattern);
+
+ igt_fb_set_size(&data->fb_test_pattern, primary,
+ conns[count].tile.tile_h_size,
+ conns[count].tile.tile_v_size);
+
+ igt_fb_set_position(&data->fb_test_pattern, primary,
+ (conns[count].tile.tile_h_size *
+ conns[count].tile.tile_h_loc),
+ (conns[count].tile.tile_v_size *
+ conns[count].tile.tile_v_loc));
+
+ igt_plane_set_size(primary,
+ conns[count].tile.tile_h_size,
+ conns[count].tile.tile_v_size);
+ }
+}
+
+static void page_flip_handler(int fd, unsigned int seq,
+ unsigned int tv_sec, unsigned int tv_usec,
+ unsigned int crtc_id, void *_data)
+{
+ data_t *data = _data;
+ data_connector_t *conn;
+ bool is_on_time = false;
+ static unsigned int _tv_sec, _tv_usec;
+ int i;
+
+ igt_debug("Page Flip Event received from CRTC:%d at %u:%u\n", crtc_id,
+ tv_sec, tv_usec);
+
+ for (i = 0; i < data->num_h_tiles; i++) {
+
+ conn = &data->conns[i];
+ if (data->display->pipes[conn->pipe].crtc_id == crtc_id) {
+ igt_assert_f(!conn->got_page_flip,
+ "Got two page-flips for CRTC %u\n",
+ crtc_id);
+ conn->got_page_flip = true;
+
+ /* Skip the following checks for the first page flip event */
+ if (_tv_sec == 0 || _tv_usec == 0) {
+ _tv_sec = tv_sec;
+ _tv_usec = tv_usec;
+ return;
+ }
+ /*
+ * For seamless tear-free display, the page flip event timestamps
+ * from all the tiles should not differ by more than 10us.
+ */
+ is_on_time = tv_sec == _tv_sec && (abs(tv_usec - _tv_usec) < 10);
+
+ igt_fail_on_f(!is_on_time, "Delayed page flip event from CRTC:%d at %u:%u\n",
+ crtc_id, tv_sec, tv_usec);
+ return;
+ }
+ }
+
+ igt_assert_f(false, "Got page-flip event for unexpected CRTC %u\n",
+ crtc_id);
+}
+
+static bool got_all_page_flips(data_t *data)
+{
+ int i;
+
+ for (i = 0; i < data->num_h_tiles; i++) {
+ if (!data->conns[i].got_page_flip)
+ return false;
+ }
+
+ return true;
+}
+
+igt_main
+{
+ igt_display_t display;
+ data_t data = {0};
+ struct pollfd pfd = {0};
+ drmEventContext drm_event = {0};
+ int ret;
+
+ igt_fixture {
+ data.drm_fd = drm_open_driver_master(DRIVER_ANY);
+
+ kmstest_set_vt_graphics_mode();
+ igt_display_require(&display, data.drm_fd);
+ igt_display_reset(&display);
+
+ data.display = &display;
+ pfd.fd = data.drm_fd;
+ pfd.events = POLLIN;
+ drm_event.version = 3;
+ drm_event.page_flip_handler2 = page_flip_handler;
+ data.commit = data.display->is_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY;
+ igt_require(data.commit == COMMIT_ATOMIC);
+
+ get_number_of_h_tiles(&data);
+ igt_debug("Number of Horizontal Tiles: %d\n", data.num_h_tiles);
+ igt_require(data.num_h_tiles > 0);
+ data.conns = calloc(data.num_h_tiles, sizeof(data_connector_t));
+ }
+
+ igt_subtest("basic-test-pattern") {
+ igt_assert(data.conns);
+
+ get_connectors(&data);
+ setup_mode(&data);
+ setup_framebuffer(&data);
+ igt_display_commit_atomic(data.display, DRM_MODE_ATOMIC_NONBLOCK |
+ DRM_MODE_PAGE_FLIP_EVENT, &data);
+ while (!got_all_page_flips(&data)) {
+ ret = poll(&pfd, 1, 1000);
+ igt_assert(ret == 1);
+ drmHandleEvent(data.drm_fd, &drm_event);
+ }
+
+ test_cleanup(&data);
+ }
+
+ igt_fixture {
+ free(data.conns);
+ close(data.drm_fd);
+ kmstest_restore_vt_mode();
+ igt_display_fini(data.display);
+ }
+}
diff --git a/tests/meson.build b/tests/meson.build
index a7b2b322..50292df8 100644
--- a/tests/meson.build
+++ b/tests/meson.build
@@ -26,6 +26,7 @@ test_progs = [
'kms_cursor_edge_walk',
'kms_cursor_legacy',
'kms_dp_dsc',
+ 'kms_dp_tiled_display',
'kms_draw_crc',
'kms_fbcon_fbt',
'kms_fence_pin_leak',
--
2.19.1
More information about the igt-dev
mailing list