[igt-dev] [PATCH i-g-t v5] igt/tests/kms_dp_tiled_display: kms test for display port tiled displays
Simon Ser
contact at emersion.fr
Mon Sep 16 19:17:54 UTC 2019
On Saturday, September 14, 2019 2:47 AM, Manasi Navare <manasi.d.navare at intel.com> wrote:
> From: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep at intel.com>
>
> This test validates the tiled DP displays to display a test pattern
> seamlessly across the two tiles. It validates the transcoder port
> sync feature on i915 to get a tearfree tiled display output.
>
> Related kernel work patches-
> https://patchwork.freedesktop.org/series/66403/
>
> This test can eventually be extended to cover tiled display support
> on other connector types.
>
> v5:
> * Addresses newline nits (Simon)
> * Add 2019 copyright, igt_describe (Petri)
> * Check all prev connectors for pipe assignments (Simon)
> * Continue if num_h_tiles = 0 (Simon)
> v4:
> * Add the logic to check there are
> page flips per connector (Simon)
> * Calloc instead of malloc to initialize (Manasi)
>
> v3:
> * Fix the pointer leaks (Simon)
> * Code indentation (Manasi)
> * Compare two consecutive flip timestamps (Simon)
> * Use single fb across tiles (Simon)
> * Fix reset mode logic (Manasi)
>
> v2: Added a check for checking pageflip event timestamps (Simon, Manasi)
> Minor style changes (Simon)
> Code clean-up and reordering
>
> Cc: Manasi Navare <manasi.d.navare at intel.com>
> Cc: Petri Latvala <petri.latvala at intel.com>
> Cc: Simon Ser <simon.ser at intel.com>
> Cc: <madhumitha.tp at gmail.com>
> Cc: Simon Ser <contact at emersion.fr>
> Signed-off-by: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep at intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
> ---
> tests/Makefile.sources | 1 +
> tests/kms_dp_tiled_display.c | 422 +++++++++++++++++++++++++++++++++++
> tests/meson.build | 1 +
> 3 files changed, 424 insertions(+)
> create mode 100644 tests/kms_dp_tiled_display.c
>
> diff --git a/tests/Makefile.sources b/tests/Makefile.sources
> index c02e4d94..7561ab9b 100644
> --- a/tests/Makefile.sources
> +++ b/tests/Makefile.sources
> @@ -41,6 +41,7 @@ TESTS_progs = \
> kms_cursor_edge_walk \
> kms_cursor_legacy \
> kms_dp_dsc \
> + kms_dp_tiled_display \
> kms_draw_crc \
> kms_fbcon_fbt \
> kms_fence_pin_leak \
> diff --git a/tests/kms_dp_tiled_display.c b/tests/kms_dp_tiled_display.c
> new file mode 100644
> index 00000000..9e9047ae
> --- /dev/null
> +++ b/tests/kms_dp_tiled_display.c
> @@ -0,0 +1,422 @@
> +/*
> + * Copyright © 2019 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> + * IN THE SOFTWARE.
> + *
> + * Authors:
> + * Madhumitha Tolakanahalli Pradeep
> + * <madhumitha.tolakanahalli.pradeep at intel.com>
> + * Manasi Navare <manasi.d.navare at intel.com>
> + *
> + * Display Port Tiled Display Test
> + * This test parses the tile information of the connectors that have TILE
> + * property set, sets up the framebuffer with correct offsets corresponding to
> + * the tile offsets and does an atomic modeset with two CRTCs for two
> + * connectors. Page flip event timestamp from each CRTC is collected and
> + * compared to make sure that they occurred in a synchronous manner.
> + *
> + * This test currently supports only horizontally tiled displays, in line with
> + * the displays supported by the kernel at the moment.
> + */
> +
> +#include "igt.h"
> +#include "poll.h"
> +#include "drm_mode.h"
> +#include "drm_fourcc.h"
> +
> +IGT_TEST_DESCRIPTION("Test for Transcoder Port Sync for Display Port Tiled Displays");
> +
> +typedef struct {
> + igt_output_t *output;
> + igt_tile_info_t tile;
> + enum pipe pipe;
> + drmModeConnectorPtr connector;
> + bool got_page_flip;
> +} data_connector_t;
> +
> +typedef struct {
> + int drm_fd;
> + int num_h_tiles;
> + igt_fb_t fb_test_pattern;
> + igt_display_t *display;
> + data_connector_t *conns;
> + enum igt_commit_style commit;
> +} data_t;
> +
> +static int drm_property_is_tile(drmModePropertyPtr prop)
> +{
> + return (strcmp(prop->name, "TILE") ? 0 : 1) &&
> + drm_property_type_is(prop, DRM_MODE_PROP_BLOB);
> +}
> +
> +static void get_connector_tile_props(data_t *data, drmModeConnectorPtr conn,
> + igt_tile_info_t *tile)
> +{
> + int i = 0;
> + drmModePropertyPtr prop;
> + drmModePropertyBlobPtr blob;
> +
> + for (i = 0; i < conn->count_props; i++) {
> + prop = drmModeGetProperty(data->drm_fd, conn->props[i]);
> +
> + igt_assert(prop);
> +
> + if (!drm_property_is_tile(prop)) {
> + drmModeFreeProperty(prop);
> + continue;
> + }
> +
> + blob = drmModeGetPropertyBlob(data->drm_fd,
> + conn->prop_values[i]);
> +
> + if (!blob)
> + goto cleanup;
> +
> + igt_parse_connector_tile_blob(blob, tile);
> + break;
> + }
> +
> +cleanup:
> + drmModeFreeProperty(prop);
> + drmModeFreePropertyBlob(blob);
> +}
> +
> +static void get_number_of_h_tiles(data_t *data)
> +{
> + int i;
> + drmModeResPtr res;
> + drmModeConnectorPtr connector;
> + igt_tile_info_t tile = {.num_h_tile = 0};
> +
> + igt_assert(res = drmModeGetResources(data->drm_fd));
> +
> + for (i = 0; i < res->count_connectors; i++) {
> + connector = drmModeGetConnectorCurrent(data->drm_fd,
> + res->connectors[i]);
> +
> + igt_assert(connector);
> +
> + if (connector->connection != DRM_MODE_CONNECTED ||
> + connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort) {
> + drmModeFreeConnector(connector);
> + continue;
> + }
> +
> + get_connector_tile_props(data, connector, &tile);
> +
> + if (tile.num_h_tile == 0) {
> + drmModeFreeConnector(connector);
> + continue;
> + }
> + data->num_h_tiles = tile.num_h_tile;
> + break;
> + }
> +
> + drmModeFreeResources(res);
> + drmModeFreeConnector(connector);
> +}
> +
> +static void get_connectors(data_t *data)
> +{
> + int count = 0;
> + igt_output_t *output;
> + data_connector_t *conns = data->conns;
> +
> + for_each_connected_output(data->display, output) {
> + conns[count].connector = drmModeGetConnector(data->display->drm_fd,
> + output->id);
> +
> + igt_assert(conns[count].connector);
> +
> + if (conns[count].connector->connector_type !=
> + DRM_MODE_CONNECTOR_DisplayPort) {
> + drmModeFreeConnector(conns[count].connector);
> + continue;
> + }
> +
> + get_connector_tile_props(data, conns[count].connector,
> + &conns[count].tile);
> +
> + if (conns[count].tile.num_h_tile == 0) {
> + drmModeFreeConnector(conns[count].connector);
> + continue;
> + }
> +
> + /* Check if the connectors belong to the same tile group */
> + if (count > 0)
> + igt_assert(conns[count].tile.tile_group_id ==
> + conns[count-1].tile.tile_group_id);
> +
> + count++;
> + }
> +}
> +
> +static void
> +reset_plane(igt_output_t *output)
> +{
> + igt_plane_t *primary;
> +
> + primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
> + igt_plane_set_fb(primary, NULL);
> +}
> +
> +static void reset_output(igt_output_t *output)
> +{
> + igt_output_set_pipe(output, PIPE_NONE);
> +}
> +
> +static void reset_mode(data_t *data)
> +{
> + int count;
> + igt_output_t *output;
> + data_connector_t *conns = data->conns;
> +
> + for (count = 0; count < data->num_h_tiles; count++) {
> + output = igt_output_from_connector(data->display,
> + conns[count].connector);
> + igt_output_set_pipe(output, PIPE_NONE);
> + }
> + igt_display_commit2(data->display, data->commit);
> +}
> +
> +static void test_cleanup(data_t *data)
> +{
> + int count;
> + data_connector_t *conns = data->conns;
> +
> + for (count = 0; count < data->num_h_tiles; count++) {
> + if (conns[count].output) {
> + reset_plane(conns[count].output);
> + reset_output(conns[count].output);
> + }
> + }
> + igt_remove_fb(data->drm_fd, &data->fb_test_pattern);
> + igt_display_commit2(data->display, data->commit);
> + memset(conns, 0, sizeof(data_connector_t) * data->num_h_tiles);
> +}
> +
> +static void setup_mode(data_t *data)
> +{
> + int count = 0, prev = 0;
> + bool pipe_in_use = false;
> + enum pipe pipe;
> + igt_output_t *output;
> + data_connector_t *conns = data->conns;
> +
> + /*
> + * The output is set to PIPE_NONE and then assigned a pipe.
> + * This is done to ensure a complete modeset occures every
> + * time the test is run.
> + */
> + reset_mode(data);
> +
> + for (count = 0; count < data->num_h_tiles; count++) {
> + output = igt_output_from_connector(data->display,
> + conns[count].connector);
> +
> + for_each_pipe(data->display, pipe) {
> + pipe_in_use = false;
> + if (count > 0) {
> + for (prev = count - 1; prev >= 0; prev--) {
> + if (pipe == conns[prev].pipe) {
> + pipe_in_use = true;
> + break;
> + }
> + }
> + if (pipe_in_use)
> + continue;
> + }
> +
> + if (igt_pipe_connector_valid(pipe, output)) {
> + conns[count].pipe = pipe;
> + conns[count].output = output;
> +
> + igt_output_set_pipe(conns[count].output,
> + conns[count].pipe);
> + break;
> + }
> + }
> + igt_assert(conns[count].pipe != PIPE_NONE);
Minor nit: should this be igt_require instead, so that we skip the test if we
don't have enough pipes?
Regardless, this is:
Reviewed-by: Simon Ser <simon.ser at intel.com>
Feel free to push it, thanks for your work!
> + }
> + igt_display_commit_atomic(data->display, DRM_MODE_ATOMIC_ALLOW_MODESET,
> + NULL);
> +}
> +
> +static void setup_framebuffer(data_t *data)
> +{
> + int count;
> + igt_plane_t *primary;
> + int fb_h_size = 0, fb_v_size = 0;
> + data_connector_t *conns = data->conns;
> +
> + for (count = 0; count < data->num_h_tiles; count++) {
> +
> + fb_h_size += conns[count].tile.tile_h_size;
> + /* We support only horizontal tiles, so vertical size is same
> + * for all tiles and needs to be assigned only once.
> + */
> + if (!fb_v_size)
> + fb_v_size = conns[count].tile.tile_v_size;
> +
> + if (count > 0)
> + igt_assert(conns[count].tile.tile_v_size ==
> + conns[count-1].tile.tile_v_size);
> + }
> +
> + igt_create_pattern_fb(data->drm_fd,
> + fb_h_size,
> + fb_v_size,
> + DRM_FORMAT_XBGR8888,
> + LOCAL_DRM_FORMAT_MOD_NONE,
> + &data->fb_test_pattern);
> +
> + for (count = 0; count < data->num_h_tiles; count++) {
> + primary = igt_output_get_plane_type(conns[count].output,
> + DRM_PLANE_TYPE_PRIMARY);
> +
> + igt_plane_set_fb(primary, &data->fb_test_pattern);
> +
> + igt_fb_set_size(&data->fb_test_pattern, primary,
> + conns[count].tile.tile_h_size,
> + conns[count].tile.tile_v_size);
> +
> + igt_fb_set_position(&data->fb_test_pattern, primary,
> + (conns[count].tile.tile_h_size *
> + conns[count].tile.tile_h_loc),
> + (conns[count].tile.tile_v_size *
> + conns[count].tile.tile_v_loc));
> +
> + igt_plane_set_size(primary,
> + conns[count].tile.tile_h_size,
> + conns[count].tile.tile_v_size);
> + }
> +}
> +
> +static void page_flip_handler(int fd, unsigned int seq,
> + unsigned int tv_sec, unsigned int tv_usec,
> + unsigned int crtc_id, void *_data)
> +{
> + data_t *data = _data;
> + data_connector_t *conn;
> + bool is_on_time = false;
> + static unsigned int _tv_sec, _tv_usec;
> + int i;
> +
> + igt_debug("Page Flip Event received from CRTC:%d at %u:%u\n", crtc_id,
> + tv_sec, tv_usec);
> +
> + for (i = 0; i < data->num_h_tiles; i++) {
> +
> + conn = &data->conns[i];
> + if (data->display->pipes[conn->pipe].crtc_id == crtc_id) {
> + igt_assert_f(!conn->got_page_flip,
> + "Got two page-flips for CRTC %u\n",
> + crtc_id);
> + conn->got_page_flip = true;
> +
> + /* Skip the following checks for the first page flip event */
> + if (_tv_sec == 0 || _tv_usec == 0) {
> + _tv_sec = tv_sec;
> + _tv_usec = tv_usec;
> + return;
> + }
> + /*
> + * For seamless tear-free display, the page flip event timestamps
> + * from all the tiles should not differ by more than 10us.
> + */
> + is_on_time = tv_sec == _tv_sec && (abs(tv_usec - _tv_usec) < 10);
> +
> + igt_fail_on_f(!is_on_time, "Delayed page flip event from CRTC:%d at %u:%u\n",
> + crtc_id, tv_sec, tv_usec);
> + return;
> + }
> + }
> +
> + igt_assert_f(false, "Got page-flip event for unexpected CRTC %u\n",
> + crtc_id);
> +}
> +
> +static bool got_all_page_flips(data_t *data)
> +{
> + int i;
> +
> + for (i = 0; i < data->num_h_tiles; i++) {
> + if (!data->conns[i].got_page_flip)
> + return false;
> + }
> +
> + return true;
> +}
> +
> +igt_main
> +{
> + igt_display_t display;
> + data_t data = {0};
> + struct pollfd pfd = {0};
> + drmEventContext drm_event = {0};
> + int ret;
> +
> + igt_fixture {
> + data.drm_fd = drm_open_driver_master(DRIVER_ANY);
> +
> + kmstest_set_vt_graphics_mode();
> + igt_display_require(&display, data.drm_fd);
> + igt_display_reset(&display);
> +
> + data.display = &display;
> + pfd.fd = data.drm_fd;
> + pfd.events = POLLIN;
> + drm_event.version = 3;
> + drm_event.page_flip_handler2 = page_flip_handler;
> + data.commit = data.display->is_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY;
> + igt_require(data.commit == COMMIT_ATOMIC);
> +
> + get_number_of_h_tiles(&data);
> + igt_debug("Number of Horizontal Tiles: %d\n", data.num_h_tiles);
> + igt_require(data.num_h_tiles > 0);
> + data.conns = calloc(data.num_h_tiles, sizeof(data_connector_t));
> + }
> +
> + igt_describe("Make sure the Tiled CRTCs are synchronized and we get "
> + "page flips for all tiled CRTCs in one vblank.");
> + igt_subtest("basic-test-pattern") {
> + igt_assert(data.conns);
> +
> + get_connectors(&data);
> + setup_mode(&data);
> + setup_framebuffer(&data);
> + igt_display_commit_atomic(data.display, DRM_MODE_ATOMIC_NONBLOCK |
> + DRM_MODE_PAGE_FLIP_EVENT, &data);
> + while (!got_all_page_flips(&data)) {
> + ret = poll(&pfd, 1, 1000);
> + igt_assert(ret == 1);
> + drmHandleEvent(data.drm_fd, &drm_event);
> + }
> +
> + test_cleanup(&data);
> + }
> +
> + igt_fixture {
> + free(data.conns);
> + close(data.drm_fd);
> + kmstest_restore_vt_mode();
> + igt_display_fini(data.display);
> + }
> +}
> diff --git a/tests/meson.build b/tests/meson.build
> index a7b2b322..50292df8 100644
> --- a/tests/meson.build
> +++ b/tests/meson.build
> @@ -26,6 +26,7 @@ test_progs = [
> 'kms_cursor_edge_walk',
> 'kms_cursor_legacy',
> 'kms_dp_dsc',
> + 'kms_dp_tiled_display',
> 'kms_draw_crc',
> 'kms_fbcon_fbt',
> 'kms_fence_pin_leak',
> --
> 2.19.1
More information about the igt-dev
mailing list