[igt-dev] [PATCH i-g-t] tests/kms_crtc_background_color: overhaul to match upstream ABI (v5.1)
Matt Roper
matthew.d.roper at intel.com
Mon Sep 30 23:13:05 UTC 2019
CRTC background color kernel patches were written about 2.5 years ago
and floated on the upstream mailing list, but since no opensource
userspace materialized, we never actually merged them. However the
corresponding IGT test did get merged and has basically been dead code
ever since.
A couple years later we finally have an open source userspace
(ChromeOS), so lets update the IGT test to match the ABI that's actually
going upstream and to remove some of the cruft from the original test
that wouldn't actually work.
It's worth noting that CRC's don't seem to work properly on Intel gen9.
The bspec does tell us that we must have one plane enabled before taking
a pipe-level ("dmux") CRC, so this test is violating that by disabling
all planes; it's quite possible that this is the source of the CRC
mismatch. If running on an Intel platform, you may want to run in
interactive mode ("--interactive-debug=bgcolor --skip-crc-compare") to
ensure that the colors being generated actually do match visually since
the CRC's can't be trusted.
v2:
- Swap red and blue ordering in property value to reflect change
in v2 of kernel series.
v3:
- Minor updates to proposed uapi helpers (s/rgba/argb/).
v4:
- General restructuring into pipe/color subtests.
- Use RGB2101010 framebuffers for comparison so that we match the bits
of precision that Intel hardware background color accepts
v5:
- Re-enable CRC comparisons; just because these don't work on Intel
doesn't mean we shouldn't use them on other vendors' platforms
(Daniel).
- Use DRIVER_ANY rather than DRIVER_INTEL. (Heiko Stuebner)
v5.1:
- Update commit message body discussion of CRC issues.
Cc: igt-dev at lists.freedesktop.org
Cc: Daniel Vetter <daniel at ffwll.ch>
Cc: Heiko Stuebner <heiko at sntech.de>
Signed-off-by: Matt Roper <matthew.d.roper at intel.com>
---
lib/igt_kms.c | 2 +-
tests/kms_crtc_background_color.c | 263 ++++++++++++++----------------
2 files changed, 127 insertions(+), 138 deletions(-)
diff --git a/lib/igt_kms.c b/lib/igt_kms.c
index e9b80b9b..9a7f0e23 100644
--- a/lib/igt_kms.c
+++ b/lib/igt_kms.c
@@ -391,7 +391,7 @@ const char * const igt_plane_prop_names[IGT_NUM_PLANE_PROPS] = {
};
const char * const igt_crtc_prop_names[IGT_NUM_CRTC_PROPS] = {
- [IGT_CRTC_BACKGROUND] = "background_color",
+ [IGT_CRTC_BACKGROUND] = "BACKGROUND_COLOR",
[IGT_CRTC_CTM] = "CTM",
[IGT_CRTC_GAMMA_LUT] = "GAMMA_LUT",
[IGT_CRTC_GAMMA_LUT_SIZE] = "GAMMA_LUT_SIZE",
diff --git a/tests/kms_crtc_background_color.c b/tests/kms_crtc_background_color.c
index 3df3401f..58cdd7a9 100644
--- a/tests/kms_crtc_background_color.c
+++ b/tests/kms_crtc_background_color.c
@@ -25,164 +25,153 @@
#include "igt.h"
#include <math.h>
-
IGT_TEST_DESCRIPTION("Test crtc background color feature");
+/*
+ * Paints a desired color into a full-screen primary plane and then compares
+ * that CRC with turning off all planes and setting the CRTC background to the
+ * same color.
+ *
+ * At least on current Intel platforms, the CRC tests appear to always fail,
+ * even though the resulting pipe output seems to be the same. The bspec tells
+ * us that we must have at least one plane turned on when taking a pipe-level
+ * CRC, so the fact that we're violating that may explain the failures. If
+ * your platform gives failures for all tests, you may want to run with
+ * --interactive-debug=bgcolor --skip-crc-compare to visually inspect that the
+ * background color matches the equivalent solid plane.
+ */
+
typedef struct {
- int gfx_fd;
igt_display_t display;
- struct igt_fb fb;
- igt_crc_t ref_crc;
+ int gfx_fd;
+ igt_output_t *output;
igt_pipe_crc_t *pipe_crc;
+ drmModeModeInfo *mode;
} data_t;
-#define BLACK 0x000000 /* BGR 8bpc */
-#define CYAN 0xFFFF00 /* BGR 8bpc */
-#define PURPLE 0xFF00FF /* BGR 8bpc */
-#define WHITE 0xFFFFFF /* BGR 8bpc */
-
-#define BLACK64 0x000000000000 /* BGR 16bpc */
-#define CYAN64 0xFFFFFFFF0000 /* BGR 16bpc */
-#define PURPLE64 0xFFFF0000FFFF /* BGR 16bpc */
-#define YELLOW64 0x0000FFFFFFFF /* BGR 16bpc */
-#define WHITE64 0xFFFFFFFFFFFF /* BGR 16bpc */
-#define RED64 0x00000000FFFF /* BGR 16bpc */
-#define GREEN64 0x0000FFFF0000 /* BGR 16bpc */
-#define BLUE64 0xFFFF00000000 /* BGR 16bpc */
-
-static void
-paint_background(data_t *data, struct igt_fb *fb, drmModeModeInfo *mode,
- uint32_t background, double alpha)
+/*
+ * Local copy of kernel uapi
+ */
+static inline __u64
+local_argb(__u8 bpc, __u16 alpha, __u16 red, __u16 green, __u16 blue)
{
- cairo_t *cr;
- int w, h;
- double r, g, b;
-
- w = mode->hdisplay;
- h = mode->vdisplay;
-
- cr = igt_get_cairo_ctx(data->gfx_fd, &data->fb);
+ int msb_shift = 16 - bpc;
- /* Paint with background color */
- r = (double) (background & 0xFF) / 255.0;
- g = (double) ((background & 0xFF00) >> 8) / 255.0;
- b = (double) ((background & 0xFF0000) >> 16) / 255.0;
- igt_paint_color_alpha(cr, 0, 0, w, h, r, g, b, alpha);
-
- igt_put_cairo_ctx(data->gfx_fd, &data->fb, cr);
+ return (__u64)alpha << msb_shift << 48 |
+ (__u64)red << msb_shift << 32 |
+ (__u64)green << msb_shift << 16 |
+ (__u64)blue << msb_shift;
}
-static void prepare_crtc(data_t *data, igt_output_t *output, enum pipe pipe,
- igt_plane_t *plane, int opaque_buffer, int plane_color,
- uint64_t pipe_background_color)
+static void test_background(data_t *data, enum pipe pipe, int w, int h,
+ __u64 r, __u64 g, __u64 b)
{
- drmModeModeInfo *mode;
- igt_display_t *display = &data->display;
- int fb_id;
- double alpha;
-
- igt_output_set_pipe(output, pipe);
-
- /* create the pipe_crc object for this pipe */
- igt_pipe_crc_free(data->pipe_crc);
- data->pipe_crc = igt_pipe_crc_new(data->gfx_fd, pipe, INTEL_PIPE_CRC_SOURCE_AUTO);
-
- mode = igt_output_get_mode(output);
-
- fb_id = igt_create_fb(data->gfx_fd,
- mode->hdisplay, mode->vdisplay,
- DRM_FORMAT_XRGB8888,
- LOCAL_DRM_FORMAT_MOD_NONE, /* tiled */
- &data->fb);
- igt_assert(fb_id);
-
- /* To make FB pixel win with background color, set alpha as full opaque */
- igt_pipe_set_prop_value(display, pipe, IGT_CRTC_BACKGROUND, pipe_background_color);
- if (opaque_buffer)
- alpha = 1.0; /* alpha 1 is fully opque */
- else
- alpha = 0.0; /* alpha 0 is fully transparent */
- paint_background(data, &data->fb, mode, plane_color, alpha);
-
- igt_plane_set_fb(plane, &data->fb);
- igt_display_commit2(display, COMMIT_UNIVERSAL);
-}
-
-static void cleanup_crtc(data_t *data, igt_output_t *output, igt_plane_t *plane)
-{
- igt_display_t *display = &data->display;
-
- igt_pipe_crc_free(data->pipe_crc);
- data->pipe_crc = NULL;
-
- igt_remove_fb(data->gfx_fd, &data->fb);
-
- igt_pipe_obj_set_prop_value(plane->pipe, IGT_CRTC_BACKGROUND, BLACK64);
+ igt_crc_t plane_crc, bg_crc;
+ struct igt_fb colorfb;
+ igt_plane_t *plane = igt_output_get_plane_type(data->output,
+ DRM_PLANE_TYPE_PRIMARY);
+
+
+ /* Fill the primary plane and set the background to the same color */
+ igt_create_color_fb(data->gfx_fd, w, h, DRM_FORMAT_XRGB2101010,
+ LOCAL_DRM_FORMAT_MOD_NONE,
+ (double)r / 0xFFFF,
+ (double)g / 0xFFFF,
+ (double)b / 0xFFFF,
+ &colorfb);
+ igt_plane_set_fb(plane, &colorfb);
+ igt_pipe_set_prop_value(&data->display, pipe, IGT_CRTC_BACKGROUND,
+ local_argb(16, 0xffff, r, g, b));
+ igt_display_commit2(&data->display, COMMIT_ATOMIC);
+ igt_pipe_crc_collect_crc(data->pipe_crc, &plane_crc);
+ igt_debug_wait_for_keypress("bgcolor");
+
+ /* Turn off the primary plane so only bg shows */
igt_plane_set_fb(plane, NULL);
- igt_output_set_pipe(output, PIPE_ANY);
-
- igt_display_commit2(display, COMMIT_UNIVERSAL);
+ igt_display_commit2(&data->display, COMMIT_ATOMIC);
+ igt_pipe_crc_collect_crc(data->pipe_crc, &bg_crc);
+ igt_debug_wait_for_keypress("bgcolor");
+
+ /*
+ * The following test relies on hardware that generates valid CRCs
+ * even when no planes are on. Sadly, this doesn't appear to be the
+ * case for current Intel platforms; pipe CRC's never match bgcolor
+ * CRC's, likely because we're violating the bspec's guidance that there
+ * must always be at least one real plane turned on when taking the
+ * pipe-level ("dmux") CRC.
+ */
+ igt_assert_crc_equal(&plane_crc, &bg_crc);
}
-static void test_crtc_background(data_t *data)
+igt_main
{
- igt_display_t *display = &data->display;
+ data_t data = {};
igt_output_t *output;
+ drmModeModeInfo *mode;
+ int w, h;
enum pipe pipe;
- int valid_tests = 0;
-
- for_each_pipe_with_valid_output(display, pipe, output) {
- igt_plane_t *plane;
-
- igt_output_set_pipe(output, pipe);
-
- plane = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
- igt_require(igt_pipe_has_prop(display, pipe, IGT_CRTC_BACKGROUND));
-
- prepare_crtc(data, output, pipe, plane, 1, PURPLE, BLACK64);
-
- /* Now set background without using a plane, i.e.,
- * Disable the plane to let hw background color win blend. */
- igt_plane_set_fb(plane, NULL);
- igt_pipe_set_prop_value(display, pipe, IGT_CRTC_BACKGROUND, PURPLE64);
- igt_display_commit2(display, COMMIT_UNIVERSAL);
-
- /* Try few other background colors */
- igt_pipe_set_prop_value(display, pipe, IGT_CRTC_BACKGROUND, CYAN64);
- igt_display_commit2(display, COMMIT_UNIVERSAL);
-
- igt_pipe_set_prop_value(display, pipe, IGT_CRTC_BACKGROUND, YELLOW64);
- igt_display_commit2(display, COMMIT_UNIVERSAL);
- igt_pipe_set_prop_value(display, pipe, IGT_CRTC_BACKGROUND, RED64);
- igt_display_commit2(display, COMMIT_UNIVERSAL);
+ igt_fixture {
+ data.gfx_fd = drm_open_driver_master(DRIVER_ANY);
+ kmstest_set_vt_graphics_mode();
- igt_pipe_set_prop_value(display, pipe, IGT_CRTC_BACKGROUND, GREEN64);
- igt_display_commit2(display, COMMIT_UNIVERSAL);
-
- igt_pipe_set_prop_value(display, pipe, IGT_CRTC_BACKGROUND, BLUE64);
- igt_display_commit2(display, COMMIT_UNIVERSAL);
-
- igt_pipe_set_prop_value(display, pipe, IGT_CRTC_BACKGROUND, WHITE64);
- igt_display_commit2(display, COMMIT_UNIVERSAL);
-
- valid_tests++;
- cleanup_crtc(data, output, plane);
+ igt_require_pipe_crc(data.gfx_fd);
+ igt_display_require(&data.display, data.gfx_fd);
}
- igt_require_f(valid_tests, "no valid crtc/connector combinations found\n");
-}
-igt_simple_main
-{
- data_t data = {};
-
- igt_skip_on_simulation();
-
- data.gfx_fd = drm_open_driver(DRIVER_INTEL);
- igt_require_pipe_crc(data.gfx_fd);
- igt_display_require(&data.display, data.gfx_fd);
-
- test_crtc_background(&data);
+ for_each_pipe_static(pipe) igt_subtest_group {
+ igt_fixture {
+ igt_display_require_output_on_pipe(&data.display, pipe);
+ igt_require(igt_pipe_has_prop(&data.display, pipe,
+ IGT_CRTC_BACKGROUND));
+
+ output = igt_get_single_output_for_pipe(&data.display,
+ pipe);
+ igt_output_set_pipe(output, pipe);
+ data.output = output;
+
+ mode = igt_output_get_mode(output);
+ w = mode->hdisplay;
+ h = mode->vdisplay;
+
+ data.pipe_crc = igt_pipe_crc_new(data.gfx_fd, pipe,
+ INTEL_PIPE_CRC_SOURCE_AUTO);
+ }
+
+ igt_subtest_f("background-color-pipe-%s-black",
+ kmstest_pipe_name(pipe))
+ test_background(&data, pipe, w, h,
+ 0, 0, 0);
+
+ igt_subtest_f("background-color-pipe-%s-white",
+ kmstest_pipe_name(pipe))
+ test_background(&data, pipe, w, h,
+ 0xFFFF, 0xFFFF, 0xFFFF);
+
+ igt_subtest_f("background-color-pipe-%s-red",
+ kmstest_pipe_name(pipe))
+ test_background(&data, pipe, w, h,
+ 0xFFFF, 0, 0);
+
+ igt_subtest_f("background-color-pipe-%s-green",
+ kmstest_pipe_name(pipe))
+
+ test_background(&data, pipe, w, h,
+ 0, 0xFFFF, 0);
+
+ igt_subtest_f("background-color-pipe-%s-blue",
+ kmstest_pipe_name(pipe))
+ test_background(&data, pipe, w, h,
+ 0, 0, 0xFFFF);
+
+ igt_fixture {
+ igt_display_reset(&data.display);
+ igt_pipe_crc_free(data.pipe_crc);
+ data.pipe_crc = NULL;
+ }
+ }
- igt_display_fini(&data.display);
+ igt_fixture {
+ igt_display_fini(&data.display);
+ }
}
--
2.21.0
More information about the igt-dev
mailing list