[igt-dev] [PATCH i-g-t v6] tests/kms_atomic: Add test to validate immutable zpos
Swati Sharma
swati2.sharma at intel.com
Thu Apr 2 11:10:49 UTC 2020
i915 implements immutable zpos property whereas the existing test
case is written to validate mutable zpos.
Added a new sub-test to validate immutable zpos. Test validates
the reported zpos property of plane by making sure only higher
zpos plane covers the lower zpos one (lower plane covers full screen,
upper plane is 64x64).
Only two planes at a time are tested in increasing fashion to avoid
combinatorial explosion. By transitive property,
if (p1, z1) < (p2, z2) and (p2, z2) < (p3, z3) then (p1, z1) < (p3, z3)
where p and z denotes planes and zpos
v2: -Removed intel only checks [Martin]
-Used XRGB8888 pixel format as used in other IGTs
-Added documentation [Martin]
-Removed skip, instead continue if plane doesn't support zpos [Martin]
-Sorted planes in increasing order of zpos [Martin]
v3: -Fix description [Martin]
-Avoid sorting [Ankit]
v4: -Change in commit message [Ankit]
-Few minor changes [Ankit]
v5: -Use igt_assert_lt() and not plain assert [Petri]
-Changed upper plane to 64x64 [Ville]
-Removed no-use break condition [Ville]
-Enabled cursor test testing too, changed pixel format
to ARGB8888 from XRGB8888 [Ville]
-New FBs at every iteration is pointless, removed [Martin, Ville]
v6: -Version 5 brought regression to legacy platforms, changed pixel format
to XRGB8888 and skipped cursor plane validation as of now
TODO: Enable cursor plane validation
Issue: https://gitlab.freedesktop.org/drm/intel/issues/404
Signed-off-by: Swati Sharma <swati2.sharma at intel.com>
Reviewed-by: Martin Peres <martin.peres at linux.intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal at intel.com>
---
tests/kms_atomic.c | 161 ++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 151 insertions(+), 10 deletions(-)
diff --git a/tests/kms_atomic.c b/tests/kms_atomic.c
index 8462d128..71d01d4c 100644
--- a/tests/kms_atomic.c
+++ b/tests/kms_atomic.c
@@ -121,7 +121,7 @@ static void plane_check_current_state(igt_plane_t *plane, const uint64_t *values
}
static void plane_commit(igt_plane_t *plane, enum igt_commit_style s,
- enum kms_atomic_check_relax relax)
+ enum kms_atomic_check_relax relax)
{
igt_display_commit2(plane->pipe->display, s);
plane_check_current_state(plane, plane->values, relax);
@@ -277,9 +277,9 @@ static uint32_t plane_get_igt_format(igt_plane_t *plane)
}
static void
-plane_primary_overlay_zpos(igt_pipe_t *pipe, igt_output_t *output,
- igt_plane_t *primary, igt_plane_t *overlay,
- uint32_t format_primary, uint32_t format_overlay)
+plane_primary_overlay_mutable_zpos(igt_pipe_t *pipe, igt_output_t *output,
+ igt_plane_t *primary, igt_plane_t *overlay,
+ uint32_t format_primary, uint32_t format_overlay)
{
struct igt_fb fb_primary, fb_overlay;
drmModeModeInfo *mode = igt_output_get_mode(output);
@@ -320,7 +320,7 @@ plane_primary_overlay_zpos(igt_pipe_t *pipe, igt_output_t *output,
igt_plane_set_prop_value(overlay, IGT_PLANE_ZPOS, 1);
igt_info("Committing with overlay on top, it has a hole "\
- "through which the primary should be seen\n");
+ "through which the primary should be seen\n");
plane_commit(primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
igt_assert_eq_u64(igt_plane_get_prop(primary, IGT_PLANE_ZPOS), 0);
@@ -346,7 +346,7 @@ plane_primary_overlay_zpos(igt_pipe_t *pipe, igt_output_t *output,
igt_put_cairo_ctx(pipe->display->drm_fd, &fb_primary, cr);
igt_info("Committing with a hole in the primary through "\
- "which the underlay should be seen\n");
+ "which the underlay should be seen\n");
plane_commit(primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
/* reset it back to initial state */
@@ -358,6 +358,137 @@ plane_primary_overlay_zpos(igt_pipe_t *pipe, igt_output_t *output,
igt_assert_eq_u64(igt_plane_get_prop(overlay, IGT_PLANE_ZPOS), 1);
}
+static void
+plane_immutable_zpos(igt_display_t *display, igt_pipe_t *pipe,
+ igt_output_t *output)
+{
+ cairo_t *cr;
+ struct igt_fb fb_ref;
+ igt_plane_t *primary;
+ drmModeModeInfo *mode;
+ igt_pipe_crc_t *pipe_crc;
+ igt_crc_t ref_crc, new_crc;
+ int fb_id_lower, fb_id_upper;
+ int n_planes = pipe->n_planes;
+ igt_plane_t *plane_ptr[n_planes];
+ struct igt_fb fb_lower, fb_upper;
+ uint32_t w_lower, h_lower, w_upper, h_upper;
+
+ igt_require(n_planes >= 2);
+
+ mode = igt_output_get_mode(output);
+ primary = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
+
+ /* for lower plane */
+ w_lower = mode->hdisplay;
+ h_lower = mode->vdisplay;
+
+ /* for upper plane */
+ w_upper = 64;
+ h_upper = 64;
+
+ igt_create_color_fb(display->drm_fd,
+ w_lower, h_lower,
+ DRM_FORMAT_XRGB8888,
+ I915_TILING_NONE,
+ 0.0, 0.0, 0.0, &fb_ref);
+
+ /* create reference image */
+ cr = igt_get_cairo_ctx(display->drm_fd, &fb_ref);
+ igt_assert(cairo_status(cr) == 0);
+ igt_paint_color(cr, 0, 0, w_lower, h_lower, 0.0, 0.0, 1.0);
+ igt_paint_color(cr, w_upper / 2, h_upper / 2, w_upper, h_upper, 1.0, 1.0, 0.0);
+ igt_put_cairo_ctx(display->drm_fd, &fb_ref, cr);
+ igt_plane_set_fb(primary, &fb_ref);
+ igt_display_commit2(display, COMMIT_ATOMIC);
+
+ /* create the pipe_crc object for this pipe */
+ pipe_crc = igt_pipe_crc_new(pipe->display->drm_fd, pipe->pipe,
+ INTEL_PIPE_CRC_SOURCE_AUTO);
+
+ /* get reference crc */
+ igt_pipe_crc_start(pipe_crc);
+ igt_pipe_crc_get_current(display->drm_fd, pipe_crc, &ref_crc);
+
+ igt_plane_set_fb(primary, NULL);
+
+ for (int k = 0; k < n_planes; k++) {
+ int zpos;
+ igt_plane_t *temp;
+
+ temp = &display->pipes[pipe->pipe].planes[k];
+
+ if (!igt_plane_has_prop(temp, IGT_PLANE_ZPOS))
+ continue;
+
+ zpos = igt_plane_get_prop(temp, IGT_PLANE_ZPOS);
+ igt_assert_lt(zpos, n_planes);
+
+ plane_ptr[zpos] = temp;
+ }
+
+ fb_id_lower = igt_create_color_fb(display->drm_fd,
+ w_lower, h_lower,
+ DRM_FORMAT_XRGB8888,
+ I915_TILING_NONE,
+ 0.0, 0.0, 1.0, &fb_lower);
+ igt_assert(fb_id_lower);
+
+ fb_id_upper = igt_create_color_fb(display->drm_fd,
+ w_upper, h_upper,
+ DRM_FORMAT_XRGB8888,
+ I915_TILING_NONE,
+ 1.0, 1.0, 0.0, &fb_upper);
+ igt_assert(fb_id_upper);
+
+ /*
+ * checking only pairs of plane in increasing fashion
+ * to avoid combinatorial explosion
+ */
+ for (int i = 0; i < n_planes - 1; i++) {
+ igt_plane_t *plane_lower, *plane_upper;
+
+ if (plane_ptr[i] != NULL)
+ plane_lower = plane_ptr[i];
+ else
+ continue;
+
+ while (i < (n_planes - 1)) {
+ if (plane_ptr[i + 1] != NULL) {
+ plane_upper = plane_ptr[i + 1];
+ break;
+ } else {
+ i++;
+ continue;
+ }
+ }
+
+ if ((plane_upper->type == DRM_PLANE_TYPE_CURSOR) ||
+ (plane_lower->type == DRM_PLANE_TYPE_CURSOR))
+ continue;
+
+ igt_plane_set_position(plane_lower, 0, 0);
+ igt_plane_set_fb(plane_lower, &fb_lower);
+
+ igt_plane_set_position(plane_upper, w_upper / 2, h_upper / 2);
+ igt_plane_set_fb(plane_upper, &fb_upper);
+
+ igt_info("Committing with the plane[%d] underneath "\
+ "plane[%d]\n", i, (i + 1));
+ igt_display_commit2(display, COMMIT_ATOMIC);
+ igt_pipe_crc_get_current(pipe->display->drm_fd, pipe_crc, &new_crc);
+
+ igt_assert_crc_equal(&ref_crc, &new_crc);
+
+ igt_plane_set_fb(plane_lower, NULL);
+ igt_plane_set_fb(plane_upper, NULL);
+ }
+
+ igt_remove_fb(display->drm_fd, &fb_ref);
+ igt_remove_fb(display->drm_fd, &fb_lower);
+ igt_remove_fb(display->drm_fd, &fb_upper);
+}
+
static void plane_overlay(igt_pipe_t *pipe, igt_output_t *output, igt_plane_t *plane)
{
drmModeModeInfo *mode = igt_output_get_mode(output);
@@ -987,14 +1118,16 @@ igt_main
plane_primary(pipe_obj, primary, &fb);
}
- igt_subtest("plane_primary_overlay_zpos") {
+ igt_describe("Verify that the overlay plane can cover the primary one (and "\
+ "vice versa) by changing their zpos property.");
+ igt_subtest("plane_primary_overlay_mutable_zpos") {
uint32_t format_primary = DRM_FORMAT_ARGB8888;
uint32_t format_overlay = DRM_FORMAT_ARGB1555;
igt_plane_t *overlay =
igt_pipe_get_plane_type(pipe_obj, DRM_PLANE_TYPE_OVERLAY);
-
igt_require(overlay);
+
igt_require(igt_plane_has_prop(primary, IGT_PLANE_ZPOS));
igt_require(igt_plane_has_prop(overlay, IGT_PLANE_ZPOS));
@@ -1002,8 +1135,15 @@ igt_main
igt_require(igt_plane_has_format_mod(overlay, format_overlay, 0x0));
igt_output_set_pipe(output, pipe);
- plane_primary_overlay_zpos(pipe_obj, output, primary, overlay,
- format_primary, format_overlay);
+ plane_primary_overlay_mutable_zpos(pipe_obj, output, primary, overlay,
+ format_primary, format_overlay);
+ }
+
+ igt_describe("Verify the reported zpos property of planes by making sure "\
+ "only higher zpos planes cover the lower zpos ones.");
+ igt_subtest("plane_immutable_zpos") {
+ igt_output_set_pipe(output, pipe);
+ plane_immutable_zpos(&display, pipe_obj, output);
}
igt_subtest("test_only") {
@@ -1011,6 +1151,7 @@ igt_main
test_only(pipe_obj, primary, output);
}
+
igt_subtest("plane_cursor_legacy") {
igt_plane_t *cursor =
igt_pipe_get_plane_type(pipe_obj, DRM_PLANE_TYPE_CURSOR);
--
2.25.1
More information about the igt-dev
mailing list