[igt-dev] [PATCH i-g-t v5 3/5] tests/i915_pm_lpsp: lpsp platform agnostic support
Anshuman Gupta
anshuman.gupta at intel.com
Thu Apr 9 05:39:49 UTC 2020
Current implementation of lpsp igt test, assumed that every non-edp
panel isn't a lpsp panel but it is not true on TGL anymore,
any HDMI/DP/DSI panel connected on pipe A and connected to PORT_{A,B,C}
can drive LPSP.
Even on older Gen9 platform a DP panel can drive lpsp on Port A.
This requires complete design change in current lpsp igt for a platform
agnostic support.
The new igt approach is relies on connector specific
i915_lpsp_capability and i915_lpsp_status debugfs attributes,
these debugfs exposes whether an output is capable of driving lpsp
and lpsp is enabled.
Nuking edp-native and non-edp test, introducing a new dynamic
igt subtest kms-lpsp, which validates lpsp on each connected output
and skip the subtest if output is not lpsp capable.
v2:
- CI failures fixup.
v3:
- removed unloading of snd_modules. [Martin]
v4:
- Don't test non-lpsp(if lpsp disabled), no ROI to test that.
- nuke panel-fitter test.
v5:
- Added dynamic subtest and igt changes according to kernel
debugfs i915_lpsp_status changes.
Signed-off-by: Anshuman Gupta <anshuman.gupta at intel.com>
---
tests/i915/i915_pm_lpsp.c | 285 +++++++++++++++-----------------------
1 file changed, 114 insertions(+), 171 deletions(-)
diff --git a/tests/i915/i915_pm_lpsp.c b/tests/i915/i915_pm_lpsp.c
index 08f82e7c..7be23e6c 100644
--- a/tests/i915/i915_pm_lpsp.c
+++ b/tests/i915/i915_pm_lpsp.c
@@ -25,210 +25,153 @@
*/
#include "igt.h"
+#include "igt_kmod.h"
+#include "igt_pm.h"
+#include "igt_sysfs.h"
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
+#define MAX_SINK_LPSP_INFO_BUF_LEN 4096
-static bool supports_lpsp(uint32_t devid)
-{
- return IS_HASWELL(devid) || IS_BROADWELL(devid);
-}
+#define PWR_DOMAIN_INFO "i915_power_domain_info"
-static bool lpsp_is_enabled(int drm_fd)
+typedef struct {
+ int drm_fd;
+ int debugfs_fd;
+ uint32_t devid;
+ char *pwr_dmn_info;
+ igt_display_t display;
+ struct igt_fb fb;
+ drmModeModeInfo *mode;
+ igt_output_t *output;
+} data_t;
+
+static bool lpsp_is_enabled(data_t *data)
{
- uint32_t val;
+ char buf[MAX_SINK_LPSP_INFO_BUF_LEN];
+ int len;
- val = INREG(HSW_PWR_WELL_CTL2);
- return !(val & HSW_PWR_WELL_STATE_ENABLED);
-}
+ len = igt_debugfs_simple_read(data->debugfs_fd, "i915_lpsp_status",
+ buf, sizeof(buf));
+ if (len < 0)
+ igt_assert_eq(len, -ENODEV);
-/* The LPSP mode is all about an enabled pipe, but we expect to also be in the
- * low power mode when no pipes are enabled, so do this check anyway. */
-static void screens_disabled_subtest(int drm_fd, drmModeResPtr drm_res)
-{
- kmstest_unset_all_crtcs(drm_fd, drm_res);
- igt_assert(lpsp_is_enabled(drm_fd));
+ return strstr(buf, "LPSP: enabled");
}
-static uint32_t create_fb(int drm_fd, int width, int height)
+/*
+ * The LPSP mode is all about an enabled pipe, but we expect to also be in the
+ * low power mode when no pipes are enabled, so do this check anyway.
+ */
+static void screens_disabled_subtest(data_t *data)
{
- struct igt_fb fb;
+ igt_output_t *output;
+ int valid_output = 0;
+ enum pipe pipe;
+
+ for_each_pipe_with_single_output(&data->display, pipe, output) {
+ data->output = output;
+ igt_output_set_pipe(data->output, PIPE_NONE);
+ igt_display_commit(&data->display);
+ valid_output++;
+ }
- return igt_create_pattern_fb(drm_fd, width, height, DRM_FORMAT_XRGB8888,
- LOCAL_DRM_FORMAT_MOD_NONE, &fb);
+ igt_require_f(valid_output, "No connected output found\n");
+ igt_assert_f(lpsp_is_enabled(data), "lpsp is not enabled\n%s:\n%s\n",
+ PWR_DOMAIN_INFO, data->pwr_dmn_info =
+ igt_sysfs_get(data->debugfs_fd, PWR_DOMAIN_INFO));
}
-static void edp_subtest(int drm_fd, drmModeResPtr drm_res,
- drmModeConnectorPtr *drm_connectors, uint32_t devid,
- bool use_panel_fitter)
+static void setup_lpsp_output(data_t *data)
{
- int i, rc;
- uint32_t crtc_id = 0, buffer_id = 0;
- drmModeConnectorPtr connector = NULL;
- drmModeModeInfoPtr mode = NULL;
- drmModeModeInfo std_1024_mode = {
- .clock = 65000,
- .hdisplay = 1024,
- .hsync_start = 1048,
- .hsync_end = 1184,
- .htotal = 1344,
- .hskew = 0,
- .vdisplay = 768,
- .vsync_start = 771,
- .vsync_end = 777,
- .vtotal = 806,
- .vscan = 0,
- .vrefresh = 60,
- .flags = 0xA,
- .type = 0x40,
- .name = "Custom 1024x768",
- };
-
- kmstest_unset_all_crtcs(drm_fd, drm_res);
-
- for (i = 0; i < drm_res->count_connectors; i++) {
- drmModeConnectorPtr c = drm_connectors[i];
-
- if (c->connector_type != DRM_MODE_CONNECTOR_eDP)
- continue;
- if (c->connection != DRM_MODE_CONNECTED)
- continue;
-
- if (!use_panel_fitter && c->count_modes) {
- connector = c;
- mode = &c->modes[0];
- break;
- }
- if (use_panel_fitter) {
- connector = c;
-
- /* This is one of the modes Xorg creates for panels, so
- * it should work just fine. Notice that Gens that
- * support LPSP are too new for panels with native
- * 1024x768 resolution, so this should force the panel
- * fitter. */
- igt_assert(c->count_modes &&
- c->modes[0].hdisplay > 1024);
- igt_assert(c->count_modes &&
- c->modes[0].vdisplay > 768);
- mode = &std_1024_mode;
- break;
- }
- }
- igt_require(connector);
-
- crtc_id = kmstest_find_crtc_for_connector(drm_fd, drm_res, connector,
- 0);
- buffer_id = create_fb(drm_fd, mode->hdisplay, mode->vdisplay);
-
- igt_assert(buffer_id);
- igt_assert(connector);
- igt_assert(mode);
-
- rc = drmModeSetCrtc(drm_fd, crtc_id, buffer_id, 0, 0,
- &connector->connector_id, 1, mode);
- igt_assert_eq(rc, 0);
-
- if (use_panel_fitter) {
- if (IS_HASWELL(devid))
- igt_assert(!lpsp_is_enabled(drm_fd));
- else
- igt_assert(lpsp_is_enabled(drm_fd));
- } else {
- igt_assert(lpsp_is_enabled(drm_fd));
- }
+ igt_plane_t *primary;
+
+ /* set output pipe = PIPE_A for LPSP */
+ igt_output_set_pipe(data->output, PIPE_A);
+ primary = igt_output_get_plane_type(data->output,
+ DRM_PLANE_TYPE_PRIMARY);
+ igt_plane_set_fb(primary, NULL);
+ igt_create_pattern_fb(data->drm_fd,
+ data->mode->hdisplay, data->mode->vdisplay,
+ DRM_FORMAT_XRGB8888,
+ LOCAL_DRM_FORMAT_MOD_NONE,
+ &data->fb);
+ igt_plane_set_fb(primary, &data->fb);
+ igt_display_commit(&data->display);
}
-static void non_edp_subtest(int drm_fd, drmModeResPtr drm_res,
- drmModeConnectorPtr *drm_connectors)
+static void test_cleanup(data_t *data)
{
- int i, rc;
- uint32_t crtc_id = 0, buffer_id = 0;
- drmModeConnectorPtr connector = NULL;
- drmModeModeInfoPtr mode = NULL;
-
- kmstest_unset_all_crtcs(drm_fd, drm_res);
-
- for (i = 0; i < drm_res->count_connectors; i++) {
- drmModeConnectorPtr c = drm_connectors[i];
-
- if (c->connector_type == DRM_MODE_CONNECTOR_eDP)
- continue;
- if (c->connection != DRM_MODE_CONNECTED)
- continue;
-
- if (c->count_modes) {
- connector = c;
- mode = &c->modes[0];
- break;
- }
- }
- igt_require(connector);
-
- crtc_id = kmstest_find_crtc_for_connector(drm_fd, drm_res, connector,
- 0);
- buffer_id = create_fb(drm_fd, mode->hdisplay, mode->vdisplay);
-
- igt_assert(buffer_id);
- igt_assert(mode);
-
- rc = drmModeSetCrtc(drm_fd, crtc_id, buffer_id, 0, 0,
- &connector->connector_id, 1, mode);
- igt_assert_eq(rc, 0);
-
- igt_assert(!lpsp_is_enabled(drm_fd));
+ igt_plane_t *primary;
+
+ if (!data->output || data->output->pending_pipe == PIPE_NONE)
+ return;
+
+ primary = igt_output_get_plane_type(data->output,
+ DRM_PLANE_TYPE_PRIMARY);
+ igt_plane_set_fb(primary, NULL);
+ igt_output_set_pipe(data->output, PIPE_NONE);
+ igt_display_commit(&data->display);
+ igt_remove_fb(data->drm_fd, &data->fb);
+ data->output = NULL;
}
-#define MAX_CONNECTORS 32
+static void test_lpsp(data_t *data)
+{
+ /* LPSP is low power single pipe usages i.e. PIPE_A */
+ igt_require(igt_pipe_connector_valid(PIPE_A, data->output));
+ igt_require_f(i915_output_is_lpsp_capable(data->drm_fd, data->output),
+ "output is not lpsp capable\n");
+
+ data->mode = igt_output_get_mode(data->output);
+ setup_lpsp_output(data);
+ igt_assert_f(lpsp_is_enabled(data), "%s: lpsp is not enabled\n%s:\n%s\n",
+ data->output->name, PWR_DOMAIN_INFO, data->pwr_dmn_info =
+ igt_sysfs_get(data->debugfs_fd, PWR_DOMAIN_INFO));
+}
-int drm_fd;
-uint32_t devid;
-drmModeResPtr drm_res;
-drmModeConnectorPtr drm_connectors[MAX_CONNECTORS];
-struct intel_mmio_data mmio_data;
+IGT_TEST_DESCRIPTION("These tests validates display Low Power Single Pipe configurations");
igt_main
{
- igt_fixture {
- int i;
-
- drm_fd = drm_open_driver_master(DRIVER_INTEL);
- igt_require(drm_fd >= 0);
-
- devid = intel_get_drm_devid(drm_fd);
-
- drm_res = drmModeGetResources(drm_fd);
- igt_require(drm_res);
- igt_assert(drm_res->count_connectors <= MAX_CONNECTORS);
+ data_t data = {};
- for (i = 0; i < drm_res->count_connectors; i++)
- drm_connectors[i] = drmModeGetConnectorCurrent(drm_fd,
- drm_res->connectors[i]);
+ igt_fixture {
+ data.drm_fd = drm_open_driver_master(DRIVER_INTEL);
+ igt_require(data.drm_fd >= 0);
+ data.debugfs_fd = igt_debugfs_dir(data.drm_fd);
+ igt_require(data.debugfs_fd >= 0);
igt_pm_enable_audio_runtime_pm();
-
- igt_require(supports_lpsp(devid));
-
- intel_register_access_init(&mmio_data, intel_get_pci_device(), 0, drm_fd);
-
kmstest_set_vt_graphics_mode();
+ data.devid = intel_get_drm_devid(data.drm_fd);
+ igt_display_require(&data.display, data.drm_fd);
+ igt_require(igt_pm_dmc_loaded(data.debugfs_fd));
}
+ igt_describe("This test validates lpsp while all crtc are disabled");
igt_subtest("screens-disabled")
- screens_disabled_subtest(drm_fd, drm_res);
- igt_subtest("edp-native")
- edp_subtest(drm_fd, drm_res, drm_connectors, devid, false);
- igt_subtest("non-edp")
- non_edp_subtest(drm_fd, drm_res, drm_connectors);
+ screens_disabled_subtest(&data);
- igt_fixture {
- int i;
+ igt_describe("This test validates lpsp on all connected outputs on low power PIPE_A");
+ igt_subtest_with_dynamic_f("kms-lpsp") {
+ igt_display_t *display = &data.display;
+ igt_output_t *output;
- intel_register_access_fini(&mmio_data);
- for (i = 0; i < drm_res->count_connectors; i++)
- drmModeFreeConnector(drm_connectors[i]);
- drmModeFreeResources(drm_res);
- close(drm_fd);
+ for_each_connected_output(display, output) {
+ igt_dynamic_f("kms-lpsp-%s", output->name) {
+ data.output = output;
+ test_lpsp(&data);
+ }
+
+ test_cleanup(&data);
+ }
+ }
+
+ igt_fixture {
+ free(data.pwr_dmn_info);
+ close(data.drm_fd);
+ igt_display_fini(&data.display);
}
}
--
2.26.0
More information about the igt-dev
mailing list