[igt-dev] [PATCH i-g-t] tests/kms_big_joiner: Add test to validate big joiner
Navare, Manasi
manasi.d.navare at intel.com
Thu Aug 13 22:58:48 UTC 2020
On Wed, Jun 24, 2020 at 03:12:38PM +0530, Karthik B S wrote:
> Added negative test to verify the different scenarios for big joiner.
> In the test, modeset is done on Pipe A for a big joiner mode and
> a second modeset is attempted on Pipe B which is expected to fail.
> Same functionality is validated for other pipes as well.
>
> Secondly, the reverse is tested where a modeset is done on Pipe B
> and then a second big joiner modeset is attempted on Pipe A which is
> expected to fail. Same functionality is validated for other pipes as well.
>
> Signed-off-by: Karthik B S <karthik.b.s at intel.com>
> ---
> tests/Makefile.sources | 1 +
> tests/kms_big_joiner.c | 171 +++++++++++++++++++++++++++++++++++++++++
> tests/meson.build | 1 +
> 3 files changed, 173 insertions(+)
> create mode 100644 tests/kms_big_joiner.c
>
> diff --git a/tests/Makefile.sources b/tests/Makefile.sources
> index af900bcf..c761eb92 100644
> --- a/tests/Makefile.sources
> +++ b/tests/Makefile.sources
> @@ -35,6 +35,7 @@ TESTS_progs = \
> kms_atomic_transition \
> kms_available_modes_crc \
> kms_big_fb \
> + kms_big_joiner \
> kms_busy \
> kms_ccs \
> kms_concurrent \
> diff --git a/tests/kms_big_joiner.c b/tests/kms_big_joiner.c
> new file mode 100644
> index 00000000..125ea0b1
> --- /dev/null
> +++ b/tests/kms_big_joiner.c
> @@ -0,0 +1,171 @@
> +/*
> + * Copyright © 2020 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> + * IN THE SOFTWARE.
> + *
> + * Author:
> + * Karthik B S <karthik.b.s at intel.com>
> + */
> +
> +#include "igt.h"
> +
> +#define HDISPLAY_5K 5120
So here HDISPLAY_5K indicates the max per pipe plane hwidth limitation right?
May be rename this to something like MAX_HDISPLAY_PER_PIPE so that we dont confuse this with some 5K test?
> +
> +IGT_TEST_DESCRIPTION("Test big joiner");
> +
> +typedef struct {
> + int drm_fd;
> + igt_display_t display;
> + struct igt_fb fb;
> +} data_t;
> +
> +static void test_invalid_modeset(data_t *data)
> +{
> + drmModeModeInfo *mode;
> + igt_display_t *display = &data->display;
> + igt_output_t *output, *big_joiner_output = NULL, *second_output = NULL;
> + int width = 0, height = 0, i, ret;
> + igt_pipe_t *pipe;
> + igt_plane_t *plane;
> +
> + for_each_connected_output(display, output) {
> + mode = &output->config.connector->modes[0];
So here the assumption is that mode[0] is always the highest mode or in 8K display
case the assumption that mode[0] will be the 8K mode.
While in most cases that is true, some displays might actual advertise stable modes as
preferred mode and 8K mode somewhere lower in the list.
May be before even calling this test, in main(), loop through all modes to find mode > 5K and pass
its mode number?
Everything else does look good.
Manasi
> +
> + width = max(width, mode->hdisplay);
> + height = max(height, mode->vdisplay);
> +
> + if (mode->hdisplay >= HDISPLAY_5K && big_joiner_output == NULL)
> + big_joiner_output = output;
> + else if (second_output == NULL)
> + second_output = output;
> +
> + igt_output_set_pipe(output, PIPE_NONE);
> + }
> +
> + igt_create_pattern_fb(data->drm_fd, width, height, DRM_FORMAT_XRGB8888,
> + LOCAL_DRM_FORMAT_MOD_NONE, &data->fb);
> +
> + for_each_pipe(display, i) {
> + if (i < (data->display.n_pipes - 1)) {
> + igt_output_set_pipe(big_joiner_output, i);
> +
> + mode = &big_joiner_output->config.connector->modes[0];
> +
> + pipe = &display->pipes[i];
> + plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
> +
> + igt_plane_set_fb(plane, &data->fb);
> + igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
> + igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
> +
> + igt_display_commit2(&data->display, COMMIT_ATOMIC);
> + igt_output_set_pipe(second_output, i + 1);
> +
> + mode = igt_output_get_mode(second_output);
> +
> + pipe = &display->pipes[i + 1];
> + plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
> +
> + igt_plane_set_fb(plane, &data->fb);
> + igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
> + igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
> +
> + /* This commit is expectd to fail as this pipe is being used for big joiner */
> + ret = igt_display_try_commit_atomic(&data->display, DRM_MODE_ATOMIC_TEST_ONLY | DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
> + igt_assert_lt(ret, 0);
> +
> + igt_output_set_pipe(big_joiner_output, PIPE_NONE);
> + igt_output_set_pipe(second_output, PIPE_NONE);
> + }
> + }
> +
> + for_each_pipe(display, i) {
> + if (i < (data->display.n_pipes - 1)) {
> + igt_output_set_pipe(second_output, i + 1);
> +
> + mode = igt_output_get_mode(second_output);
> +
> + pipe = &display->pipes[i + 1];
> + plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
> +
> + igt_plane_set_fb(plane, &data->fb);
> + igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
> + igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
> +
> + igt_display_commit2(&data->display, COMMIT_ATOMIC);
> +
> + igt_output_set_pipe(big_joiner_output, i);
> +
> + mode = &big_joiner_output->config.connector->modes[0];
> +
> + pipe = &display->pipes[i];
> + plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
> +
> + igt_plane_set_fb(plane, &data->fb);
> + igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
> + igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
> +
> + /* This commit is expected to fail as the adjacent pipe is already in use*/
> + ret = igt_display_try_commit_atomic(&data->display, DRM_MODE_ATOMIC_TEST_ONLY | DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
> + igt_assert_lt(ret, 0);
> +
> + igt_output_set_pipe(big_joiner_output, PIPE_NONE);
> + igt_output_set_pipe(second_output, PIPE_NONE);
> + }
> + }
> +
> + igt_plane_set_fb(plane, NULL);
> + igt_remove_fb(data->drm_fd, &data->fb);
> +}
> +
> +igt_main
> +{
> + data_t data;
> + bool big_joiner_mode_found = false;
> + igt_output_t *output;
> + drmModeModeInfo *mode;
> + int valid_output = 0;
> +
> + igt_fixture {
> + data.drm_fd = drm_open_driver_master(DRIVER_INTEL);
> + kmstest_set_vt_graphics_mode();
> +
> + igt_display_require(&data.display, data.drm_fd);
> +
> + for_each_connected_output(&data.display, output) {
> + mode = &output->config.connector->modes[0];
> + if (mode->hdisplay >= HDISPLAY_5K)
> + big_joiner_mode_found = true;
> +
> + valid_output++;
> + }
> +
> + igt_require_f(big_joiner_mode_found, "No output with 5k+ mode found\n");
> + igt_require_f(valid_output > 1, "No valid Second output found\n");
> + }
> +
> + igt_describe("Verify if the modeset on the adjoining pipe is rejected"
> + "when the pipe is active with a big joiner modeset");
> + igt_subtest("invalid-modeset")
> + test_invalid_modeset(&data);
> +
> + igt_fixture
> + igt_display_fini(&data.display);
> +}
> diff --git a/tests/meson.build b/tests/meson.build
> index 28091794..430b43de 100644
> --- a/tests/meson.build
> +++ b/tests/meson.build
> @@ -19,6 +19,7 @@ test_progs = [
> 'kms_atomic_transition',
> 'kms_available_modes_crc',
> 'kms_big_fb',
> + 'kms_big_joiner' ,
> 'kms_busy',
> 'kms_ccs',
> 'kms_concurrent',
> --
> 2.22.0
>
More information about the igt-dev
mailing list