[igt-dev] [PATCH i-g-t 1/2] tests/i915_pm_dc: Move PSR checks back to individual subtests

Souza, Jose jose.souza at intel.com
Fri Feb 28 20:34:30 UTC 2020


On Fri, 2020-02-28 at 20:47 +0200, Ville Syrjälä wrote:
> On Fri, Feb 28, 2020 at 06:32:17PM +0000, Souza, Jose wrote:
> > Anshuman already send a fix for this one:
> > https://patchwork.freedesktop.org/series/73509/
> 
> Ah, cool. I'll presume someone will pushed it eventually.

I will, just waiting for the fix in the second patch.

> 
> > ping Anushaman on the change in the second patch.
> > 
> > On Fri, 2020-02-28 at 20:22 +0200, Ville Syrjala wrote:
> > > From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > > 
> > > The dpms tests don't need PSR. So move the PSR check back into
> > > the subtests that need it.
> > > 
> > > Cc: José Roberto de Souza <jose.souza at intel.com>
> > > Cc: Arkadiusz Hiler <arkadiusz.hiler at intel.com>
> > > Fixes: 6cbe6af372a0 ("tests/i915_pm_dc: Use psr_sink_support
> > > instead
> > > of reimplement it again")
> > > Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > > ---
> > >  tests/i915/i915_pm_dc.c | 4 +++-
> > >  1 file changed, 3 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/tests/i915/i915_pm_dc.c b/tests/i915/i915_pm_dc.c
> > > index afcc10bc7e20..6975f165be7f 100644
> > > --- a/tests/i915/i915_pm_dc.c
> > > +++ b/tests/i915/i915_pm_dc.c
> > > @@ -393,7 +393,6 @@ int main(int argc, char *argv[])
> > >  		igt_require(igt_setup_runtime_pm(data.drm_fd));
> > >  		igt_require(igt_pm_dmc_loaded(data.debugfs_fd));
> > >  		igt_display_require(&data.display, data.drm_fd);
> > > -		igt_require(psr_sink_support(data.debugfs_fd,
> > > PSR_MODE_1));
> > >  		/* Make sure our Kernel supports MSR and the module is
> > > loaded */
> > >  		igt_require(igt_kmod_load("msr", NULL) == 0);
> > >  
> > > @@ -405,6 +404,7 @@ int main(int argc, char *argv[])
> > >  	igt_describe("In this test we make sure that system enters
> > > DC3CO "
> > >  		     "when PSR2 is active and system is in SLEEP
> > > state");
> > >  	igt_subtest("dc3co-vpb-simulation") {
> > > +		igt_require(psr_sink_support(data.debugfs_fd,
> > > PSR_MODE_1));
> > >  		test_dc3co_vpb_simulation(&data);
> > >  	}
> > >  
> > > @@ -412,6 +412,7 @@ int main(int argc, char *argv[])
> > >  		     "while PSR is active");
> > >  	igt_subtest("dc5-psr") {
> > >  		data.op_psr_mode = PSR_MODE_1;
> > > +		igt_require(psr_sink_support(data.debugfs_fd,
> > > PSR_MODE_1));
> > >  		psr_enable(data.debugfs_fd, data.op_psr_mode);
> > >  		test_dc_state_psr(&data, CHECK_DC5);
> > >  	}
> > > @@ -420,6 +421,7 @@ int main(int argc, char *argv[])
> > >  		     "while PSR is active");
> > >  	igt_subtest("dc6-psr") {
> > >  		data.op_psr_mode = PSR_MODE_1;
> > > +		igt_require(psr_sink_support(data.debugfs_fd,
> > > PSR_MODE_1));
> > >  		psr_enable(data.debugfs_fd, data.op_psr_mode);
> > >  		igt_require_f(igt_pm_pc8_plus_residencies_enabled(data.
> > > msr_fd),
> > >  			      "PC8+ residencies not supported\n");


More information about the igt-dev mailing list