[igt-dev] [PATCH i-g-t] Add new IGT test to validate crtc Dithering
Bhanuprakash Modem
bhanuprakash.modem at intel.com
Mon Jul 20 16:50:11 UTC 2020
Even though feature Dithering is there since legacy, there is no
specific IGT for this.
This patch will create New IGT for Dithering. And below is the
truth table for CRTC Dithering.
|----------------|---------|-------------|
| Frame buffer | Panel | Dithering |
|----------------|---------|-------------|
| 8 BPC | 6 BPC | Yes |
|----------------|---------|-------------|
| 8 BPC | 8 BPC | No |
|----------------|---------|-------------|
| 8 BPC | 10 BPC | No |
|----------------|---------|-------------|
| 10 BPC | 6 BPC | Yes |
|----------------|---------|-------------|
| 10 BPC | 8 BPC | Yes |
|----------------|---------|-------------|
| 10 BPC | 10 BPC | No |
|----------------|---------|-------------|
| 16 BPC | 6 BPC | Yes |
|----------------|---------|-------------|
| 16 BPC | 8 BPC | Yes |
|----------------|---------|-------------|
| 16 BPC | 10 BPC | Yes |
|----------------|---------|-------------|
Cc: Swati Sharma <swati2.sharma at intel.com>
Cc: Karthik B S <karthik.b.s at intel.com>
Cc: Uma Shankar <uma.shankar at intel.com>
Cc: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya at intel.com>
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem at intel.com>
---
tests/Makefile.sources | 1 +
tests/kms_dither.c | 252 +++++++++++++++++++++++++++++++++++++++++
tests/meson.build | 1 +
3 files changed, 254 insertions(+)
create mode 100644 tests/kms_dither.c
diff --git a/tests/Makefile.sources b/tests/Makefile.sources
index 0653c3d3..e816037c 100644
--- a/tests/Makefile.sources
+++ b/tests/Makefile.sources
@@ -43,6 +43,7 @@ TESTS_progs = \
kms_cursor_crc \
kms_cursor_edge_walk \
kms_cursor_legacy \
+ kms_dither \
kms_dp_aux_dev \
kms_dp_dsc \
kms_dp_tiled_display \
diff --git a/tests/kms_dither.c b/tests/kms_dither.c
new file mode 100644
index 00000000..f4b143bb
--- /dev/null
+++ b/tests/kms_dither.c
@@ -0,0 +1,252 @@
+/*
+ * Copyright © 2020 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "igt.h"
+#include <fcntl.h>
+#include <termios.h>
+#include <unistd.h>
+
+IGT_TEST_DESCRIPTION("Test Dithering block status");
+
+/* Connector BPC */
+#define IGT_CONNECTOR_BPC_6 6
+#define IGT_CONNECTOR_BPC_8 8
+#define IGT_CONNECTOR_BPC_10 10
+#define IGT_CONNECTOR_BPC_12 12
+
+/* Framebuffer BPC */
+#define IGT_FRAME_BUFFER_BPC_8 8
+#define IGT_FRAME_BUFFER_BPC_10 10
+#define IGT_FRAME_BUFFER_BPC_16 16
+
+/* Test flags. */
+enum {
+ TEST_NONE = 1 << 0,
+ TEST_SUSPEND = 1 << 1,
+};
+
+/* Common test data. */
+typedef struct data {
+ igt_display_t display;
+ igt_plane_t *primary;
+ igt_output_t *output;
+ igt_pipe_t *pipe;
+ drmModeModeInfo *mode;
+ enum pipe pipe_id;
+ int drm_fd;
+} data_t;
+
+/* Prepare test data. */
+static void prepare_test(data_t *data, igt_output_t *output, enum pipe pipe)
+{
+ igt_display_t *display = &data->display;
+
+ data->pipe_id = pipe;
+ data->pipe = &data->display.pipes[data->pipe_id];
+ igt_assert(data->pipe);
+
+ igt_display_reset(display);
+
+ data->output = output;
+ igt_assert(data->output);
+
+ data->mode = igt_output_get_mode(data->output);
+ igt_assert(data->mode);
+
+ data->primary =
+ igt_pipe_get_plane_type(data->pipe, DRM_PLANE_TYPE_PRIMARY);
+
+ igt_output_set_pipe(data->output, data->pipe_id);
+}
+
+/* Returns the current state of dithering from the crtc debugfs. */
+static bool get_dither_state(data_t *data)
+{
+ char buf[256];
+ char crtc_name[7];
+ char *start_loc;
+ int fd, res;
+ unsigned int status;
+
+ snprintf(crtc_name, 7, "crtc-%d", data->pipe_id);
+ fd = igt_debugfs_open(data->drm_fd, crtc_name, O_RDONLY);
+ igt_assert(fd >= 0);
+
+ res = igt_debugfs_simple_read(fd, "dither", buf, sizeof(buf));
+ igt_require(res > 0);
+ close(fd);
+
+ igt_assert(start_loc = strstr(buf, "Dither: "));
+ igt_assert_eq(sscanf(start_loc, "Dither: %u", &status), 1);
+
+ return !!status;
+}
+
+/* Returns the current and maximum bpc from the connector debugfs. */
+static unsigned int get_output_bpc(data_t *data, igt_output_t *output)
+{
+ char buf[256];
+ char *start_loc;
+ int fd, res;
+ unsigned int max_bpc;
+
+ fd = igt_debugfs_connector_dir(data->drm_fd, output->name, O_RDONLY);
+ igt_assert(fd >= 0);
+
+ res = igt_debugfs_simple_read(fd, "output_bpc", buf, sizeof(buf));
+
+ igt_require(res > 0);
+
+ close(fd);
+
+ igt_assert(start_loc = strstr(buf, "Maximum: "));
+ igt_assert_eq(sscanf(start_loc, "Maximum: %u", &max_bpc), 1);
+
+ return max_bpc;
+}
+
+static void test_dithering_on_output(data_t *data, igt_output_t *output,
+ int fb_bpc, int fb_format, int output_bpc,
+ uint32_t flags)
+{
+ igt_display_t *display = &data->display;
+ enum pipe pipe;
+ igt_fb_t fb;
+ int ret;
+ bool enabled;
+
+ for_each_pipe(display, pipe) {
+ if (!igt_pipe_connector_valid(pipe, output))
+ continue;
+
+ igt_info("Dithering test execution on %s PIPE_%s\n",
+ output->name, kmstest_pipe_name(pipe));
+ prepare_test(data, output, pipe);
+
+ ret = igt_create_fb(data->drm_fd, 512, 512, fb_format,
+ LOCAL_DRM_FORMAT_MOD_NONE,
+ &fb);
+ igt_assert(ret);
+
+ igt_plane_set_fb(data->primary, &fb);
+ igt_plane_set_size(data->primary, data->mode->hdisplay, data->mode->vdisplay);
+ igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC, output_bpc);
+ igt_display_commit2(display, display->is_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY);
+
+ /* Check the status of Dithering block
+ * If fb_bpc is greater than output_bpc, Dithering should be Enabled
+ * else Disabled
+ */
+ enabled = get_dither_state(data);
+ if (fb_bpc > output_bpc)
+ igt_assert_f(enabled, "(fb_%dbpc > output_%dbpc): Dither should be enabled\n",
+ fb_bpc, output_bpc);
+ else
+ igt_assert_f(!enabled, "(fb_%dbpc <= output_%dbpc): Dither should be disabled\n",
+ fb_bpc, output_bpc);
+
+ igt_plane_set_fb(data->primary, NULL);
+ igt_output_set_pipe(output, PIPE_ANY);
+ igt_display_commit2(display, display->is_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY);
+ igt_remove_fb(data->drm_fd, &fb);
+ }
+ return;
+}
+
+/* Returns true if an output supports max bpc property. */
+static bool has_max_bpc(igt_output_t *output)
+{
+ return igt_output_has_prop(output, IGT_CONNECTOR_MAX_BPC) &&
+ igt_output_get_prop(output, IGT_CONNECTOR_MAX_BPC);
+}
+
+static void
+run_dither_test(data_t *data, int fb_bpc, int fb_format, int output_bpc,
+ uint32_t flags)
+{
+ igt_output_t *output;
+ unsigned int max_bpc;
+ int valid_outputs = 0;
+
+ for_each_connected_output(&data->display, output) {
+ if (!has_max_bpc(output))
+ continue;
+
+ max_bpc = get_output_bpc(data, output);
+ if(max_bpc < output_bpc)
+ continue;
+
+ test_dithering_on_output(data, output, fb_bpc, fb_format, output_bpc, flags);
+ valid_outputs++;
+ }
+
+ igt_require_f(valid_outputs, "No connector found with MAX BPC connector property. (or) "
+ "No connector found with Max Panel BPC (%d) >= %d.\n",
+ max_bpc, output_bpc);
+}
+
+igt_main
+{
+ struct {
+ int bpc;
+ int format;
+ } fb_formats[] = {
+ { IGT_FRAME_BUFFER_BPC_8, DRM_FORMAT_RGB888 },
+ { IGT_FRAME_BUFFER_BPC_10, DRM_FORMAT_XRGB2101010 },
+ { IGT_FRAME_BUFFER_BPC_16, DRM_FORMAT_XRGB16161616F },
+ };
+ int output_bpc[] = {
+ IGT_CONNECTOR_BPC_6,
+ IGT_CONNECTOR_BPC_8,
+ IGT_CONNECTOR_BPC_10
+ };
+ int i, j;
+ data_t data = { 0 };
+
+ igt_fixture {
+ data.drm_fd = drm_open_driver_master(DRIVER_INTEL);
+ kmstest_set_vt_graphics_mode();
+
+ igt_display_require(&data.display, data.drm_fd);
+ igt_display_require_output(&data.display);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(fb_formats); i++) {
+ for (j = 0; j < ARRAY_SIZE(output_bpc); j++) {
+ igt_describe_f("Framebuffer BPC:%d, Panel BPC:%d, Expected Dither:%s\n",
+ fb_formats[i].bpc, output_bpc[j],
+ (fb_formats[i].bpc > output_bpc[j]) ? "Enable": "Disable");
+
+ igt_subtest_f("FB-%dBPC-Vs-Panel-%dBPC", fb_formats[i].bpc, output_bpc[j])
+ run_dither_test(&data,
+ fb_formats[i].bpc,
+ fb_formats[i].format,
+ output_bpc[j],
+ TEST_NONE);
+ }
+ }
+
+ igt_fixture {
+ igt_display_fini(&data.display);
+ }
+}
diff --git a/tests/meson.build b/tests/meson.build
index cfe508c4..05a9cfb8 100644
--- a/tests/meson.build
+++ b/tests/meson.build
@@ -27,6 +27,7 @@ test_progs = [
'kms_cursor_crc',
'kms_cursor_edge_walk',
'kms_cursor_legacy',
+ 'kms_dither',
'kms_dp_aux_dev',
'kms_dp_dsc',
'kms_dp_tiled_display',
--
2.20.1
More information about the igt-dev
mailing list