[igt-dev] [RFC PATCH 2/2] tests/kms_vrr: Add new subtest to validate Flipline mode
Manasi Navare
manasi.d.navare at intel.com
Wed Jun 3 19:47:14 UTC 2020
On Mon, May 11, 2020 at 11:56:47AM +0530, bhanuprakash.modem at intel.com wrote:
> From: Bhanuprakash Modem <bhanuprakash.modem at intel.com>
>
> Check flipline mode by making sure that flips happen at flipline
> decision boundary.
>
> Example: if monitor vrr range is 40 - 60Hz and
>
> * flip at refresh_rate > 60Hz:
> Flip should happen at the flipline boundary & returned refresh rate
> would be 60Hz.
> * flip at refresh_rate == 50Hz:
> Flip should happen right away so returned refresh rate is 50Hz.
> * flip at refresh_rate < 40Hz:
> Flip should happen at the vmax so the returned refresh rate
> would be 40Hz.
>
> Cc: Harry Wentland <harry.wentland at amd.com>
> Cc: Nicholas Kazlauskas <nicholas.kazlauskas at amd.com>
> Cc: Manasi Navare <manasi.d.navare at intel.com>
> Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem at intel.com>
> ---
> tests/kms_vrr.c | 101 ++++++++++++++++++++++++++++++++++++------------
> 1 file changed, 76 insertions(+), 25 deletions(-)
>
> diff --git a/tests/kms_vrr.c b/tests/kms_vrr.c
> index 0fe28931..c8a8c065 100644
> --- a/tests/kms_vrr.c
> +++ b/tests/kms_vrr.c
> @@ -37,6 +37,7 @@ enum {
> TEST_NONE = 0,
> TEST_DPMS = 1 << 0,
> TEST_SUSPEND = 1 << 1,
> + TEST_FLIPLINE = 1 << 2,
> };
>
> typedef struct range {
> @@ -51,6 +52,12 @@ typedef struct data {
> igt_fb_t fb1;
> } data_t;
>
> +typedef struct vtest_ns {
> + uint64_t min;
> + uint64_t mid;
> + uint64_t max;
> +} vtest_ns_t;
> +
> typedef void (*test_t)(data_t*, enum pipe, igt_output_t*, uint32_t);
>
> /* Converts a timespec structure to nanoseconds. */
> @@ -100,13 +107,18 @@ static uint64_t rate_from_refresh(uint64_t refresh)
> return NSECS_PER_SEC / refresh;
> }
>
> -/* Returns the min and max vrr range from the connector debugfs. */
> +/* Read min and max vrr range from the connector debugfs.
> + * - min range should be less than the current mode vfreq
> + * - if max range is grater than the current mode vfreq, consider
> + * current mode vfreq as the max range.
> + */
> static range_t get_vrr_range(data_t *data, igt_output_t *output)
> {
> char buf[256];
> char *start_loc;
> int fd, res;
> range_t range;
> + drmModeModeInfo *mode = igt_output_get_mode(output);
>
> fd = igt_debugfs_connector_dir(data->drm_fd, output->name, O_RDONLY);
> igt_assert(fd >= 0);
> @@ -118,32 +130,28 @@ static range_t get_vrr_range(data_t *data, igt_output_t *output)
>
> igt_assert(start_loc = strstr(buf, "Min: "));
> igt_assert_eq(sscanf(start_loc, "Min: %u", &range.min), 1);
> + igt_require(mode->vrefresh > range.min);
Why is it a req to have mode->vrefresh greater than Range.min? I think it also can be equal
to the min refresh rate right? Is it just to make sure that after enabling VRR, we can still
strtch the vblank further than the existing vblank to achieve even lower refresh rate?
May be in this case also better to add this comment somewhere or something under igt_debug atleast
Manasi
>
> igt_assert(start_loc = strstr(buf, "Max: "));
> igt_assert_eq(sscanf(start_loc, "Max: %u", &range.max), 1);
>
> + range.max = (mode->vrefresh < range.max) ? mode->vrefresh : range.max;
> +
> return range;
> }
>
> -/* Returns a suitable vrr test frequency. */
> -static uint64_t get_test_rate_ns(data_t *data, igt_output_t *output)
> +/* Returns vrr test frequency for min, mid & max range. */
> +static vtest_ns_t get_test_rate_ns(data_t *data, igt_output_t *output)
> {
> - drmModeModeInfo *mode = igt_output_get_mode(output);
> range_t range;
> - uint64_t vtest;
> + vtest_ns_t vtest_ns;
>
> - /*
> - * The frequency with the fastest convergence speed should be
> - * the midpoint between the current mode vfreq and the min
> - * supported vfreq.
> - */
> range = get_vrr_range(data, output);
> - igt_require(mode->vrefresh > range.min);
> + vtest_ns.min = rate_from_refresh(range.min);
> + vtest_ns.mid = rate_from_refresh(((range.max + range.min) / 2));
> + vtest_ns.max = rate_from_refresh(range.max);
>
> - vtest = (mode->vrefresh - range.min) / 2 + range.min;
> - igt_require(vtest < mode->vrefresh);
> -
> - return rate_from_refresh(vtest);
> + return vtest_ns;
> }
>
> /* Returns true if an output supports VRR. */
> @@ -240,6 +248,7 @@ flip_and_measure(data_t *data, igt_output_t *output, enum pipe pipe,
> uint64_t start_ns, last_vblank_ns;
> uint32_t total_flip = 0, total_pass = 0;
> bool front = false;
> + vtest_ns_t vtest_ns = get_test_rate_ns(data, output);
>
> /* Align with the vblank region to speed up convergence. */
> last_vblank_ns = wait_for_vblank(data, pipe);
> @@ -253,10 +262,6 @@ flip_and_measure(data_t *data, igt_output_t *output, enum pipe pipe,
> do_flip(data, pipe, front ? &data->fb1 : &data->fb0);
>
> vblank_ns = wait_for_vblank(data, pipe);
> - diff_ns = rate_ns - (vblank_ns - last_vblank_ns);
> - last_vblank_ns = vblank_ns;
> -
> - total_flip += 1;
>
> /*
> * Check if the difference between the two flip timestamps
> @@ -266,9 +271,19 @@ flip_and_measure(data_t *data, igt_output_t *output, enum pipe pipe,
> * difference between 144Hz and 143Hz which should give this
> * enough accuracy for most use cases.
> */
> + if ((rate_ns <= vtest_ns.min) && (rate_ns >= vtest_ns.max))
> + diff_ns = rate_ns - (vblank_ns - last_vblank_ns);
> + else if (rate_ns > vtest_ns.min)
> + diff_ns = vtest_ns.min - (vblank_ns - last_vblank_ns);
> + else if (rate_ns < vtest_ns.max)
> + diff_ns = vtest_ns.max - (vblank_ns - last_vblank_ns);
> +
> if (llabs(diff_ns) < 50000ll)
> total_pass += 1;
>
> + last_vblank_ns = vblank_ns;
> + total_flip += 1;
> +
> now_ns = get_time_ns();
> if (now_ns - start_ns > duration_ns)
> break;
> @@ -295,10 +310,13 @@ flip_and_measure(data_t *data, igt_output_t *output, enum pipe pipe,
> static void
> test_basic(data_t *data, enum pipe pipe, igt_output_t *output, uint32_t flags)
> {
> - uint64_t rate;
> uint32_t result;
> + vtest_ns_t vtest_ns = get_test_rate_ns(data, output);
> + range_t range = get_vrr_range(data, output);
> + uint64_t rate = vtest_ns.mid;
>
> - rate = get_test_rate_ns(data, output);
> + igt_info("VRR Test execution on %s, PIPE_%s\n",
> + output->name, kmstest_pipe_name(pipe));
>
> prepare_test(data, output, pipe);
>
> @@ -324,6 +342,35 @@ test_basic(data_t *data, enum pipe pipe, igt_output_t *output, uint32_t flags)
> igt_system_suspend_autoresume(SUSPEND_STATE_MEM,
> SUSPEND_TEST_NONE);
>
> + /*
> + * Check flipline mode by making sure that flips happen at flipline
> + * decision boundary.
> + *
> + * Example: if range is 40 - 60Hz and
> + * if refresh_rate > 60Hz:
> + * Flip should happen at the flipline boundary & returned refresh rate
> + * would be 60Hz.
> + * if refresh_rate is 50Hz:
> + * Flip will happen right away so returned refresh rate is 50Hz.
> + * if refresh_rate < 40Hz:
> + * Flip should happen at the vmax so the returned refresh rate
> + * would be 40Hz.
> + */
> + if (flags & TEST_FLIPLINE) {
> + rate = rate_from_refresh(range.min - 5);
> + result = flip_and_measure(data, output, pipe, rate, TEST_DURATION_NS);
> + igt_assert_f(result > 75,
> + "Refresh rate %"PRIu64"ns: Target VRR on threshold not reached, result was %u%%\n",
> + rate, result);
> +
> + rate = rate_from_refresh(range.max + 5);
> + result = flip_and_measure(data, output, pipe, rate, TEST_DURATION_NS);
> + igt_assert_f(result > 75,
> + "Refresh rate %"PRIu64"ns: Target VRR on threshold not reached, result was %u%%\n",
> + rate, result);
> + }
> +
> + rate = vtest_ns.mid;
> result = flip_and_measure(data, output, pipe, rate, TEST_DURATION_NS);
>
> set_vrr_on_pipe(data, pipe, 0);
> @@ -331,14 +378,14 @@ test_basic(data_t *data, enum pipe pipe, igt_output_t *output, uint32_t flags)
> /* This check is delayed until after VRR is disabled so it isn't
> * left enabled if the test fails. */
> igt_assert_f(result > 75,
> - "Target VRR on threshold not reached, result was %u%%\n",
> - result);
> + "Refresh rate %"PRIu64"ns: Target VRR on threshold not reached, result was %u%%\n",
> + rate, result);
>
> result = flip_and_measure(data, output, pipe, rate, TEST_DURATION_NS);
>
> igt_assert_f(result < 10,
> - "Target VRR off threshold exceeded, result was %u%%\n",
> - result);
> + "Refresh rate %"PRIu64"ns: Target VRR off threshold exceeded, result was %u%%\n",
> + rate, result);
>
> igt_remove_fb(data->drm_fd, &data->fb1);
> igt_remove_fb(data->drm_fd, &data->fb0);
> @@ -392,6 +439,10 @@ igt_main
> igt_subtest("flip-suspend")
> run_vrr_test(&data, test_basic, TEST_SUSPEND);
>
> + igt_describe("Make sure that flips happen at flipline decision boundary.");
> + igt_subtest("flipline")
> + run_vrr_test(&data, test_basic, TEST_FLIPLINE);
> +
> igt_fixture {
> igt_display_fini(&data.display);
> }
> --
> 2.24.1.1.gb6d4d82bd5
>
More information about the igt-dev
mailing list