[igt-dev] [PATCH i-g-t] tests/kms_big_joiner: Add test to validate big joiner
Karthik B S
karthik.b.s at intel.com
Wed Jun 24 09:42:38 UTC 2020
Added negative test to verify the different scenarios for big joiner.
In the test, modeset is done on Pipe A for a big joiner mode and
a second modeset is attempted on Pipe B which is expected to fail.
Same functionality is validated for other pipes as well.
Secondly, the reverse is tested where a modeset is done on Pipe B
and then a second big joiner modeset is attempted on Pipe A which is
expected to fail. Same functionality is validated for other pipes as well.
Signed-off-by: Karthik B S <karthik.b.s at intel.com>
---
tests/Makefile.sources | 1 +
tests/kms_big_joiner.c | 171 +++++++++++++++++++++++++++++++++++++++++
tests/meson.build | 1 +
3 files changed, 173 insertions(+)
create mode 100644 tests/kms_big_joiner.c
diff --git a/tests/Makefile.sources b/tests/Makefile.sources
index af900bcf..c761eb92 100644
--- a/tests/Makefile.sources
+++ b/tests/Makefile.sources
@@ -35,6 +35,7 @@ TESTS_progs = \
kms_atomic_transition \
kms_available_modes_crc \
kms_big_fb \
+ kms_big_joiner \
kms_busy \
kms_ccs \
kms_concurrent \
diff --git a/tests/kms_big_joiner.c b/tests/kms_big_joiner.c
new file mode 100644
index 00000000..125ea0b1
--- /dev/null
+++ b/tests/kms_big_joiner.c
@@ -0,0 +1,171 @@
+/*
+ * Copyright © 2020 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Author:
+ * Karthik B S <karthik.b.s at intel.com>
+ */
+
+#include "igt.h"
+
+#define HDISPLAY_5K 5120
+
+IGT_TEST_DESCRIPTION("Test big joiner");
+
+typedef struct {
+ int drm_fd;
+ igt_display_t display;
+ struct igt_fb fb;
+} data_t;
+
+static void test_invalid_modeset(data_t *data)
+{
+ drmModeModeInfo *mode;
+ igt_display_t *display = &data->display;
+ igt_output_t *output, *big_joiner_output = NULL, *second_output = NULL;
+ int width = 0, height = 0, i, ret;
+ igt_pipe_t *pipe;
+ igt_plane_t *plane;
+
+ for_each_connected_output(display, output) {
+ mode = &output->config.connector->modes[0];
+
+ width = max(width, mode->hdisplay);
+ height = max(height, mode->vdisplay);
+
+ if (mode->hdisplay >= HDISPLAY_5K && big_joiner_output == NULL)
+ big_joiner_output = output;
+ else if (second_output == NULL)
+ second_output = output;
+
+ igt_output_set_pipe(output, PIPE_NONE);
+ }
+
+ igt_create_pattern_fb(data->drm_fd, width, height, DRM_FORMAT_XRGB8888,
+ LOCAL_DRM_FORMAT_MOD_NONE, &data->fb);
+
+ for_each_pipe(display, i) {
+ if (i < (data->display.n_pipes - 1)) {
+ igt_output_set_pipe(big_joiner_output, i);
+
+ mode = &big_joiner_output->config.connector->modes[0];
+
+ pipe = &display->pipes[i];
+ plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
+
+ igt_plane_set_fb(plane, &data->fb);
+ igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
+ igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
+
+ igt_display_commit2(&data->display, COMMIT_ATOMIC);
+ igt_output_set_pipe(second_output, i + 1);
+
+ mode = igt_output_get_mode(second_output);
+
+ pipe = &display->pipes[i + 1];
+ plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
+
+ igt_plane_set_fb(plane, &data->fb);
+ igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
+ igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
+
+ /* This commit is expectd to fail as this pipe is being used for big joiner */
+ ret = igt_display_try_commit_atomic(&data->display, DRM_MODE_ATOMIC_TEST_ONLY | DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+ igt_assert_lt(ret, 0);
+
+ igt_output_set_pipe(big_joiner_output, PIPE_NONE);
+ igt_output_set_pipe(second_output, PIPE_NONE);
+ }
+ }
+
+ for_each_pipe(display, i) {
+ if (i < (data->display.n_pipes - 1)) {
+ igt_output_set_pipe(second_output, i + 1);
+
+ mode = igt_output_get_mode(second_output);
+
+ pipe = &display->pipes[i + 1];
+ plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
+
+ igt_plane_set_fb(plane, &data->fb);
+ igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
+ igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
+
+ igt_display_commit2(&data->display, COMMIT_ATOMIC);
+
+ igt_output_set_pipe(big_joiner_output, i);
+
+ mode = &big_joiner_output->config.connector->modes[0];
+
+ pipe = &display->pipes[i];
+ plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
+
+ igt_plane_set_fb(plane, &data->fb);
+ igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
+ igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
+
+ /* This commit is expected to fail as the adjacent pipe is already in use*/
+ ret = igt_display_try_commit_atomic(&data->display, DRM_MODE_ATOMIC_TEST_ONLY | DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+ igt_assert_lt(ret, 0);
+
+ igt_output_set_pipe(big_joiner_output, PIPE_NONE);
+ igt_output_set_pipe(second_output, PIPE_NONE);
+ }
+ }
+
+ igt_plane_set_fb(plane, NULL);
+ igt_remove_fb(data->drm_fd, &data->fb);
+}
+
+igt_main
+{
+ data_t data;
+ bool big_joiner_mode_found = false;
+ igt_output_t *output;
+ drmModeModeInfo *mode;
+ int valid_output = 0;
+
+ igt_fixture {
+ data.drm_fd = drm_open_driver_master(DRIVER_INTEL);
+ kmstest_set_vt_graphics_mode();
+
+ igt_display_require(&data.display, data.drm_fd);
+
+ for_each_connected_output(&data.display, output) {
+ mode = &output->config.connector->modes[0];
+ if (mode->hdisplay >= HDISPLAY_5K)
+ big_joiner_mode_found = true;
+
+ valid_output++;
+ }
+
+ igt_require_f(big_joiner_mode_found, "No output with 5k+ mode found\n");
+ igt_require_f(valid_output > 1, "No valid Second output found\n");
+ }
+
+ igt_describe("Verify if the modeset on the adjoining pipe is rejected"
+ "when the pipe is active with a big joiner modeset");
+ igt_subtest("invalid-modeset")
+ test_invalid_modeset(&data);
+
+ igt_fixture
+ igt_display_fini(&data.display);
+}
diff --git a/tests/meson.build b/tests/meson.build
index 28091794..430b43de 100644
--- a/tests/meson.build
+++ b/tests/meson.build
@@ -19,6 +19,7 @@ test_progs = [
'kms_atomic_transition',
'kms_available_modes_crc',
'kms_big_fb',
+ 'kms_big_joiner' ,
'kms_busy',
'kms_ccs',
'kms_concurrent',
--
2.22.0
More information about the igt-dev
mailing list