[igt-dev] [PATCH i-g-t v3] tests/kms_atomic: add test to validate immutable zpos
Nautiyal, Ankit K
ankit.k.nautiyal at intel.com
Tue Mar 17 05:43:00 UTC 2020
Hi Swati,
Have minor comments inline, otherwise the patch looks good to me.
On 3/17/2020 12:04 AM, Swati Sharma wrote:
> i915 implements immutable zpos property whereas the existing test
> case is written to validate mutable zpos.
>
> Added new sub-test to validate immutable zpos. In the test, to validate
> reported zpos of the plane is correct by making sure a full-screen plane
> covers all other planes with the lower zpos, and the plane with the next
> available zpos is indeed partially covering the full-screen plane.
I think this require rephrasing as per the latest changes, as we check 2
planes at a time.
>
> v2: -Removed intel only checks [Martin]
> -Used XRGB8888 pixel format as used in other IGTs
> -Added documentation [Martin]
> -Removed skip, instead continue if plane doesn't support zpos [Martin]
> -Sorted planes in increasing order of zpos [Martin]
> v3: -Fix description [Martin]
> -Avoid sorting [Ankit]
>
> Issue: https://gitlab.freedesktop.org/drm/intel/issues/404
> Signed-off-by: Swati Sharma <swati2.sharma at intel.com>
> Reviewed-by: Martin Peres <martin.peres at linux.intel.com>
> ---
> tests/kms_atomic.c | 159 ++++++++++++++++++++++++++++++++++++++++++---
> 1 file changed, 149 insertions(+), 10 deletions(-)
>
> diff --git a/tests/kms_atomic.c b/tests/kms_atomic.c
> index 8462d128..c55bc97d 100644
> --- a/tests/kms_atomic.c
> +++ b/tests/kms_atomic.c
> @@ -121,7 +121,7 @@ static void plane_check_current_state(igt_plane_t *plane, const uint64_t *values
> }
>
> static void plane_commit(igt_plane_t *plane, enum igt_commit_style s,
> - enum kms_atomic_check_relax relax)
> + enum kms_atomic_check_relax relax)
> {
> igt_display_commit2(plane->pipe->display, s);
> plane_check_current_state(plane, plane->values, relax);
> @@ -277,9 +277,9 @@ static uint32_t plane_get_igt_format(igt_plane_t *plane)
> }
>
> static void
> -plane_primary_overlay_zpos(igt_pipe_t *pipe, igt_output_t *output,
> - igt_plane_t *primary, igt_plane_t *overlay,
> - uint32_t format_primary, uint32_t format_overlay)
> +plane_primary_overlay_mutable_zpos(igt_pipe_t *pipe, igt_output_t *output,
> + igt_plane_t *primary, igt_plane_t *overlay,
> + uint32_t format_primary, uint32_t format_overlay)
> {
> struct igt_fb fb_primary, fb_overlay;
> drmModeModeInfo *mode = igt_output_get_mode(output);
> @@ -320,7 +320,7 @@ plane_primary_overlay_zpos(igt_pipe_t *pipe, igt_output_t *output,
> igt_plane_set_prop_value(overlay, IGT_PLANE_ZPOS, 1);
>
> igt_info("Committing with overlay on top, it has a hole "\
> - "through which the primary should be seen\n");
> + "through which the primary should be seen\n");
> plane_commit(primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
>
> igt_assert_eq_u64(igt_plane_get_prop(primary, IGT_PLANE_ZPOS), 0);
> @@ -346,7 +346,7 @@ plane_primary_overlay_zpos(igt_pipe_t *pipe, igt_output_t *output,
> igt_put_cairo_ctx(pipe->display->drm_fd, &fb_primary, cr);
>
> igt_info("Committing with a hole in the primary through "\
> - "which the underlay should be seen\n");
> + "which the underlay should be seen\n");
> plane_commit(primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
>
> /* reset it back to initial state */
> @@ -358,6 +358,135 @@ plane_primary_overlay_zpos(igt_pipe_t *pipe, igt_output_t *output,
> igt_assert_eq_u64(igt_plane_get_prop(overlay, IGT_PLANE_ZPOS), 1);
> }
>
> +static void
> +plane_immutable_zpos(igt_display_t *display, igt_pipe_t *pipe,
> + igt_output_t *output)
> +{
> + cairo_t *cr;
> + struct igt_fb fb_ref;
> + igt_plane_t *primary;
> + drmModeModeInfo *mode;
> + igt_pipe_crc_t *pipe_crc;
> + igt_crc_t ref_crc, new_crc;
> + int n_planes = pipe->n_planes;
> + igt_plane_t *plane_ptr[n_planes];
> + uint32_t w_lower, h_lower, w_upper, h_upper;
> +
> + igt_require(n_planes >= 2);
> +
> + mode = igt_output_get_mode(output);
> + primary = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
> +
> + /* for lower plane */
> + w_lower = mode->hdisplay;
> + h_lower = mode->vdisplay;
> +
> + /* for upper plane */
> + w_upper = mode->hdisplay / 2;
> + h_upper = mode->vdisplay / 2;
> +
> + igt_create_color_fb(display->drm_fd,
> + w_lower, h_lower,
> + DRM_FORMAT_XRGB8888,
> + I915_TILING_NONE,
> + 0.0, 0.0, 0.0, &fb_ref);
> +
> + /* create reference image */
> + cr = igt_get_cairo_ctx(display->drm_fd, &fb_ref);
> + igt_assert(cairo_status(cr) == 0);
> + igt_paint_color(cr, 0, 0, w_lower, h_lower, 0.0, 0.0, 1.0);
> + igt_paint_color(cr, w_upper / 2, h_upper / 2, w_upper, h_upper, 1.0, 1.0, 0.0);
> + igt_put_cairo_ctx(display->drm_fd, &fb_ref, cr);
> + igt_plane_set_fb(primary, &fb_ref);
> + igt_display_commit2(display, COMMIT_ATOMIC);
> +
> + /* create the pipe_crc object for this pipe */
> + pipe_crc = igt_pipe_crc_new(pipe->display->drm_fd, pipe->pipe,
> + INTEL_PIPE_CRC_SOURCE_AUTO);
> +
> + /* get reference crc */
> + igt_pipe_crc_start(pipe_crc);
> + igt_pipe_crc_get_current(display->drm_fd, pipe_crc, &ref_crc);
> +
> + igt_plane_set_fb(primary, NULL);
> +
> + for (int k = 0; k < n_planes; k++) {
> + int zpos;
> + igt_plane_t *temp;
> +
> + temp = &display->pipes[pipe->pipe].planes[k];
> +
> + if (!igt_plane_has_prop(temp, IGT_PLANE_ZPOS))
> + continue;
> +
> + zpos = igt_plane_get_prop(temp, IGT_PLANE_ZPOS);
I think, here assert (zpos < n_planes) should be there.
> + plane_ptr[zpos] = &display->pipes[pipe->pipe].planes[k];
Can use temp here.
> + }
> +
> + /*
> + * checking only pairs of plane in increasing fashion
> + * to avoid combinatorial explosion
> + */
> + for (int i = 0; i < n_planes - 1; i++) {
> + int fb_id_lower, fb_id_upper;
> + struct igt_fb fb_lower, fb_upper;
> + igt_plane_t *plane_lower, *plane_upper;
> +
> + if (plane_ptr[i] != NULL) {
> + plane_lower = plane_ptr[i];
> + igt_assert(plane_lower);
No need of assert here, plane_ptr[i] is already checked earlier.
With these minor changes:
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal at intel.com>
-Ankit
> + } else
> + continue;
> +
> + while (i < (n_planes - 1)) {
> + if (plane_ptr[i + 1] != NULL) {
> + plane_upper = plane_ptr[i + 1];
> + break;
> + } else {
> + i++;
> + continue;
> + }
> + }
> +
> + if (i == (n_planes - 1))
> + break;
> +
> + if ((plane_lower->type == DRM_PLANE_TYPE_CURSOR) ||
> + (plane_upper->type == DRM_PLANE_TYPE_CURSOR))
> + continue;
> +
> + fb_id_lower = igt_create_color_fb(display->drm_fd,
> + w_lower, h_lower,
> + DRM_FORMAT_XRGB8888,
> + I915_TILING_NONE,
> + 0.0, 0.0, 1.0, &fb_lower);
> + igt_assert(fb_id_lower);
> +
> + fb_id_upper = igt_create_color_fb(display->drm_fd,
> + w_upper, h_upper,
> + DRM_FORMAT_XRGB8888,
> + I915_TILING_NONE,
> + 1.0, 1.0, 0.0, &fb_upper);
> + igt_assert(fb_id_upper);
> +
> + igt_plane_set_position(plane_lower, 0, 0);
> + igt_plane_set_fb(plane_lower, &fb_lower);
> +
> + igt_plane_set_position(plane_upper, w_upper / 2, h_upper / 2);
> + igt_plane_set_fb(plane_upper, &fb_upper);
> +
> + igt_info("Committing with the plane[%d] underneath "\
> + "plane[%d]\n", i, (i + 1));
> + igt_display_commit2(display, COMMIT_ATOMIC);
> + igt_pipe_crc_get_current(pipe->display->drm_fd, pipe_crc, &new_crc);
> +
> + igt_assert_crc_equal(&ref_crc, &new_crc);
> +
> + igt_plane_set_fb(plane_lower, NULL);
> + igt_plane_set_fb(plane_upper, NULL);
> + }
> +}
> +
> static void plane_overlay(igt_pipe_t *pipe, igt_output_t *output, igt_plane_t *plane)
> {
> drmModeModeInfo *mode = igt_output_get_mode(output);
> @@ -987,14 +1116,16 @@ igt_main
> plane_primary(pipe_obj, primary, &fb);
> }
>
> - igt_subtest("plane_primary_overlay_zpos") {
> + igt_describe("Verify that the overlay plane can cover the primary one (and "\
> + "vice versa) by changing their zpos property.");
> + igt_subtest("plane_primary_overlay_mutable_zpos") {
> uint32_t format_primary = DRM_FORMAT_ARGB8888;
> uint32_t format_overlay = DRM_FORMAT_ARGB1555;
>
> igt_plane_t *overlay =
> igt_pipe_get_plane_type(pipe_obj, DRM_PLANE_TYPE_OVERLAY);
> -
> igt_require(overlay);
> +
> igt_require(igt_plane_has_prop(primary, IGT_PLANE_ZPOS));
> igt_require(igt_plane_has_prop(overlay, IGT_PLANE_ZPOS));
>
> @@ -1002,8 +1133,15 @@ igt_main
> igt_require(igt_plane_has_format_mod(overlay, format_overlay, 0x0));
>
> igt_output_set_pipe(output, pipe);
> - plane_primary_overlay_zpos(pipe_obj, output, primary, overlay,
> - format_primary, format_overlay);
> + plane_primary_overlay_mutable_zpos(pipe_obj, output, primary, overlay,
> + format_primary, format_overlay);
> + }
> +
> + igt_describe("Verify the reported zpos property of planes by making sure "\
> + "only higher zpos planes cover the lower zpos ones.");
> + igt_subtest("plane_immutable_zpos") {
> + igt_output_set_pipe(output, pipe);
> + plane_immutable_zpos(&display, pipe_obj, output);
> }
>
> igt_subtest("test_only") {
> @@ -1011,6 +1149,7 @@ igt_main
>
> test_only(pipe_obj, primary, output);
> }
> +
> igt_subtest("plane_cursor_legacy") {
> igt_plane_t *cursor =
> igt_pipe_get_plane_type(pipe_obj, DRM_PLANE_TYPE_CURSOR);
More information about the igt-dev
mailing list