[igt-dev] [PATCH i-g-t v2 2/5] tests/i915_pm_lpsp: lpsp platform agnostic support
Peres, Martin
martin.peres at intel.com
Mon Mar 23 07:00:08 UTC 2020
On 2020-03-23 08:32, Anshuman Gupta wrote:
> Current implementation of lpsp igt test, assumed that every non-edp
> panel isn't a lpsp panel but it is not true on TGL anymore,
> any HDMI/DP/DSI panel connected on pipe A and connected to PORT_{A,B,C}
> can drive LPSP.
> Even on older Gen9 platform a DP panel can drive lpsp on Port A.
> This requires complete design change in current lpsp igt for a platform
> agnostic support.
>
> The new igt approach is relies on connector specific debugfs
> attribute i915_lpsp_info, which exposes whether an output is capable
> of driving lpsp and whether lpsp is enabled.
>
> v2:
> - CI failures fixup.
>
> Signed-off-by: Anshuman Gupta <anshuman.gupta at intel.com>
> ---
> tests/i915/i915_pm_lpsp.c | 303 +++++++++++++++++++++++---------------
> 1 file changed, 186 insertions(+), 117 deletions(-)
>
> diff --git a/tests/i915/i915_pm_lpsp.c b/tests/i915/i915_pm_lpsp.c
> index 42938e10..e400c92e 100644
> --- a/tests/i915/i915_pm_lpsp.c
> +++ b/tests/i915/i915_pm_lpsp.c
> @@ -25,49 +25,125 @@
> */
>
> #include "igt.h"
> +#include "igt_kmod.h"
> +#include "igt_pm.h"
> +#include "igt_sysfs.h"
> #include <sys/types.h>
> #include <sys/stat.h>
> #include <fcntl.h>
> #include <unistd.h>
>
> +#define MAX_SINK_LPSP_INFO_BUF_LEN 5000
>
> -static bool supports_lpsp(uint32_t devid)
> +#define PWR_DOMAIN_INFO "i915_power_domain_info"
> +
> +const char *snd_module[10] = {"snd_hda_codec_hdmi", "snd_hda_intel", "snd_hda_codec", "snd_hda_core", NULL};
> +
> +typedef struct {
> + int drm_fd;
> + int debugfs_fd;
> + uint32_t devid;
> + char *pwr_dmn_info;
> + igt_display_t display;
> + struct igt_fb fb;
> + drmModeModeInfo *mode;
> + igt_output_t *output;
> +} data_t;
> +
> +static void debugfs_read(int fd, const char *param, char *buf, int len)
> {
> - return IS_HASWELL(devid) || IS_BROADWELL(devid);
> + len = igt_debugfs_simple_read(fd, param, buf, len);
> + if (len < 0)
> + igt_assert_eq(len, -ENODEV);
> }
>
> -static bool lpsp_is_enabled(int drm_fd)
> +static bool lpsp_is_enabled(data_t *data)
> {
> - uint32_t val;
> + char buf[MAX_SINK_LPSP_INFO_BUF_LEN];
> + int fd;
> +
> + fd = igt_debugfs_connector_dir(data->drm_fd, data->output->name,
> + O_RDONLY);
> + igt_require(fd >= 0);
> +
> + debugfs_read(fd, "i915_lpsp_info", buf, sizeof(buf));
> + close(fd);
>
> - val = INREG(HSW_PWR_WELL_CTL2);
> - return !(val & HSW_PWR_WELL_STATE_ENABLED);
> + return strstr(buf, "LPSP enabled");
> }
>
> -/* The LPSP mode is all about an enabled pipe, but we expect to also be in the
> - * low power mode when no pipes are enabled, so do this check anyway. */
> -static void screens_disabled_subtest(int drm_fd, drmModeResPtr drm_res)
> +/*
> + * The LPSP mode is all about an enabled pipe, but we expect to also be in the
> + * low power mode when no pipes are enabled, so do this check anyway.
> + */
> +static void screens_disabled_subtest(data_t *data)
> {
> - kmstest_unset_all_crtcs(drm_fd, drm_res);
> - igt_assert(lpsp_is_enabled(drm_fd));
> + igt_output_t *output;
> + enum pipe pipe;
> + igt_plane_t *primary;
> +
> + for_each_pipe_with_single_output(&data->display, pipe, output) {
> + data->output = output;
> + igt_output_set_pipe(data->output, pipe);
> + primary = igt_output_get_plane_type(data->output,
> + DRM_PLANE_TYPE_PRIMARY);
> + igt_plane_set_fb(primary, NULL);
> + igt_display_commit(&data->display);
> + }
> +
> + igt_assert(lpsp_is_enabled(data));
> }
>
> -static uint32_t create_fb(int drm_fd, int width, int height)
> +static void check_output_lpsp(data_t *data)
> {
> - struct igt_fb fb;
> + if (igt_output_is_lpsp_capable(data->drm_fd, data->output))
> + igt_assert_f(lpsp_is_enabled(data), "%s: lpsp is not enabled\n%s:\n%s\n",
> + data->output->name, PWR_DOMAIN_INFO, data->pwr_dmn_info =
> + igt_sysfs_get(data->debugfs_fd, PWR_DOMAIN_INFO));
> + else
> + igt_assert(!lpsp_is_enabled(data));
> +}
>
> - return igt_create_pattern_fb(drm_fd, width, height, DRM_FORMAT_XRGB8888,
> - LOCAL_DRM_FORMAT_MOD_NONE, &fb);
> +static void setup_lpsp_output(data_t *data)
> +{
> + igt_plane_t *primary;
> +
> + /* set output pipe = PIPE_A for LPSP */
> + igt_output_set_pipe(data->output, PIPE_A);
> + primary = igt_output_get_plane_type(data->output,
> + DRM_PLANE_TYPE_PRIMARY);
> + igt_plane_set_fb(primary, NULL);
> + igt_create_pattern_fb(data->drm_fd,
> + data->mode->hdisplay, data->mode->vdisplay,
> + DRM_FORMAT_XRGB8888,
> + LOCAL_DRM_FORMAT_MOD_NONE,
> + &data->fb);
> + igt_plane_set_fb(primary, &data->fb);
> + igt_display_commit(&data->display);
> +}
> +
> +static void cleanup_lpsp_output(data_t *data)
> +{
> + igt_plane_t *primary;
> +
> + if (!data->output)
> + return;
> +
> + primary = igt_output_get_plane_type(data->output,
> + DRM_PLANE_TYPE_PRIMARY);
> + igt_plane_set_fb(primary, NULL);
> + igt_output_set_pipe(data->output, PIPE_NONE);
> + igt_display_commit(&data->display);
> + igt_remove_fb(data->drm_fd, &data->fb);
> + data->output = NULL;
> }
>
> -static void edp_subtest(int drm_fd, drmModeResPtr drm_res,
> - drmModeConnectorPtr *drm_connectors, uint32_t devid,
> - bool use_panel_fitter)
> +static void edp_subtest(data_t *data, bool use_panel_fitter)
> {
> - int i, rc;
> - uint32_t crtc_id = 0, buffer_id = 0;
> - drmModeConnectorPtr connector = NULL;
> - drmModeModeInfoPtr mode = NULL;
> + igt_display_t *display = &data->display;
> + igt_output_t *output;
> + int valid_output;
> +
> drmModeModeInfo std_1024_mode = {
> .clock = 65000,
> .hdisplay = 1024,
> @@ -86,23 +162,17 @@ static void edp_subtest(int drm_fd, drmModeResPtr drm_res,
> .name = "Custom 1024x768",
> };
>
> - kmstest_unset_all_crtcs(drm_fd, drm_res);
> -
> - for (i = 0; i < drm_res->count_connectors; i++) {
> - drmModeConnectorPtr c = drm_connectors[i];
> + for_each_connected_output(display, output) {
> + drmModeConnectorPtr c = output->config.connector;
>
> if (c->connector_type != DRM_MODE_CONNECTOR_eDP)
> continue;
> - if (c->connection != DRM_MODE_CONNECTED)
> + if (!igt_pipe_connector_valid(PIPE_A, output))
> continue;
>
> - if (!use_panel_fitter && c->count_modes) {
> - connector = c;
> - mode = &c->modes[0];
> - break;
> - }
> + data->output = output;
> +
> if (use_panel_fitter) {
> - connector = c;
>
> /* This is one of the modes Xorg creates for panels, so
> * it should work just fine. Notice that Gens that
> @@ -113,124 +183,123 @@ static void edp_subtest(int drm_fd, drmModeResPtr drm_res,
> c->modes[0].hdisplay > 1024);
> igt_assert(c->count_modes &&
> c->modes[0].vdisplay > 768);
> - mode = &std_1024_mode;
> - break;
> + data->mode = &std_1024_mode;
> + igt_output_override_mode(output, data->mode);
> + } else {
> + data->mode = igt_output_get_mode(output);
> }
> - }
> - igt_require(connector);
>
> - crtc_id = kmstest_find_crtc_for_connector(drm_fd, drm_res, connector,
> - 0);
> - buffer_id = create_fb(drm_fd, mode->hdisplay, mode->vdisplay);
> + setup_lpsp_output(data);
> +
> + if (use_panel_fitter && IS_HASWELL(data->devid))
> + igt_assert(!lpsp_is_enabled(data));
> + else
> + check_output_lpsp(data);
>
> - igt_assert(buffer_id);
> - igt_assert(connector);
> - igt_assert(mode);
> + cleanup_lpsp_output(data);
> + valid_output++;
> + }
>
> - rc = drmModeSetCrtc(drm_fd, crtc_id, buffer_id, 0, 0,
> - &connector->connector_id, 1, mode);
> - igt_assert_eq(rc, 0);
> + igt_require_f(valid_output, "No edp connector found\n");
> +}
>
> - if (use_panel_fitter) {
> - if (IS_HASWELL(devid))
> - igt_assert(!lpsp_is_enabled(drm_fd));
> - else
> - igt_assert(lpsp_is_enabled(drm_fd));
> - } else {
> - igt_assert(lpsp_is_enabled(drm_fd));
> +static bool unload_snd_hda_core_module(void)
> +{
> + int i;
> +
> + /* unbind snd_hda_intel */
> + kick_snd_hda_intel();
> +
> + for (i = 0; snd_module[i]; i++) {
> + if (igt_kmod_is_loaded(snd_module[i]) &&
> + igt_kmod_unload(snd_module[i], KMOD_REMOVE_FORCE)) {
> + igt_warn("Could not unload %s\n", snd_module[i]);
> + igt_kmod_list_loaded();
> + igt_lsof("/dev/snd");
> + return false;
> + }
> }
> +
> + return true;
> }
>
> -static void non_edp_subtest(int drm_fd, drmModeResPtr drm_res,
> - drmModeConnectorPtr *drm_connectors)
> +static void load_snd_hda_core_module(void)
> {
> - int i, rc;
> - uint32_t crtc_id = 0, buffer_id = 0;
> - drmModeConnectorPtr connector = NULL;
> - drmModeModeInfoPtr mode = NULL;
> + igt_kmod_load("snd_hda_core", NULL);
> +}
> +
> +static void non_edp_subtest(data_t *data)
> +{
> + igt_display_t *display = &data->display;
> + igt_output_t *output;
> + int valid_output;
>
> - kmstest_unset_all_crtcs(drm_fd, drm_res);
> + /* DP/HDMI panel requires to drive lpsp without audio */
> + igt_require(unload_snd_hda_core_module());
I'm not super happy with having to unload modules that it would be very
easy to forget to re-add and would make audio tests fail :s
IMO, if the DUT is not playing sound, we should be able to enter LPSP.
If no, then I would consider this a driver bug for wasting energy
sending 0s to the screen.
Thoughts on this?
Martin
>
> - for (i = 0; i < drm_res->count_connectors; i++) {
> - drmModeConnectorPtr c = drm_connectors[i];
> + for_each_connected_output(display, output) {
> + drmModeConnectorPtr c = output->config.connector;
>
> if (c->connector_type == DRM_MODE_CONNECTOR_eDP)
> continue;
> if (c->connection != DRM_MODE_CONNECTED)
> continue;
> + if (!igt_pipe_connector_valid(PIPE_A, output))
> + continue;
>
> - if (c->count_modes) {
> - connector = c;
> - mode = &c->modes[0];
> - break;
> - }
> + data->output = output;
> + data->mode = igt_output_get_mode(output);
> + setup_lpsp_output(data);
> + check_output_lpsp(data);
> + cleanup_lpsp_output(data);
> + load_snd_hda_core_module();
> + valid_output++;
> }
> - igt_require(connector);
> -
> - crtc_id = kmstest_find_crtc_for_connector(drm_fd, drm_res, connector,
> - 0);
> - buffer_id = create_fb(drm_fd, mode->hdisplay, mode->vdisplay);
>
> - igt_assert(buffer_id);
> - igt_assert(mode);
> -
> - rc = drmModeSetCrtc(drm_fd, crtc_id, buffer_id, 0, 0,
> - &connector->connector_id, 1, mode);
> - igt_assert_eq(rc, 0);
> -
> - igt_assert(!lpsp_is_enabled(drm_fd));
> + igt_require_f(valid_output, "No non-edp connector found\n");
> }
>
> -#define MAX_CONNECTORS 32
> -
> -int drm_fd;
> -uint32_t devid;
> -drmModeResPtr drm_res;
> -drmModeConnectorPtr drm_connectors[MAX_CONNECTORS];
> -struct intel_mmio_data mmio_data;
> +IGT_TEST_DESCRIPTION("These tests validates display Low Power Single Pipe configurations");
> igt_main
> {
> - igt_fixture {
> - int i;
> -
> - drm_fd = drm_open_driver_master(DRIVER_INTEL);
> - igt_require(drm_fd >= 0);
> -
> - devid = intel_get_drm_devid(drm_fd);
> + data_t data = {};
>
> - drm_res = drmModeGetResources(drm_fd);
> - igt_require(drm_res);
> - igt_assert(drm_res->count_connectors <= MAX_CONNECTORS);
> -
> - for (i = 0; i < drm_res->count_connectors; i++)
> - drm_connectors[i] = drmModeGetConnectorCurrent(drm_fd,
> - drm_res->connectors[i]);
> + igt_fixture {
>
> + data.drm_fd = drm_open_driver_master(DRIVER_INTEL);
> + igt_require(data.drm_fd >= 0);
> + data.debugfs_fd = igt_debugfs_dir(data.drm_fd);
> + igt_require(data.debugfs_fd >= 0);
> igt_pm_enable_audio_runtime_pm();
> -
> - igt_require(supports_lpsp(devid));
> -
> - intel_register_access_init(&mmio_data, intel_get_pci_device(), 0, drm_fd);
> -
> kmstest_set_vt_graphics_mode();
> + data.devid = intel_get_drm_devid(data.drm_fd);
> + igt_display_require(&data.display, data.drm_fd);
> + igt_require(igt_pm_dmc_loaded(data.debugfs_fd));
> }
>
> + igt_describe("This test validates lpsp while all crtc are disabled");
> igt_subtest("screens-disabled")
> - screens_disabled_subtest(drm_fd, drm_res);
> + screens_disabled_subtest(&data);
> + igt_describe("This test validates lpsp on eDP panel");
> igt_subtest("edp-native")
> - edp_subtest(drm_fd, drm_res, drm_connectors, devid, false);
> + edp_subtest(&data, false);
> + igt_fixture
> + cleanup_lpsp_output(&data);
> + igt_describe("This test validates lpsp on eDP panel while forcing panel_fitter");
> igt_subtest("edp-panel-fitter")
> - edp_subtest(drm_fd, drm_res, drm_connectors, devid, true);
> + edp_subtest(&data, true);
> + igt_fixture
> + cleanup_lpsp_output(&data);
> + igt_describe("This test validates lpsp on DP/HDMI/DSI panels");
> igt_subtest("non-edp")
> - non_edp_subtest(drm_fd, drm_res, drm_connectors);
> + non_edp_subtest(&data);
> + igt_fixture
> + cleanup_lpsp_output(&data);
>
> igt_fixture {
> - int i;
> -
> - intel_register_access_fini(&mmio_data);
> - for (i = 0; i < drm_res->count_connectors; i++)
> - drmModeFreeConnector(drm_connectors[i]);
> - drmModeFreeResources(drm_res);
> - close(drm_fd);
> + free(data.pwr_dmn_info);
> + load_snd_hda_core_module();
> + close(data.drm_fd);
> + igt_display_fini(&data.display);
> }
> }
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: pEpkey.asc
Type: application/pgp-keys
Size: 1774 bytes
Desc: pEpkey.asc
URL: <https://lists.freedesktop.org/archives/igt-dev/attachments/20200323/a08f3eb9/attachment-0001.key>
More information about the igt-dev
mailing list