[igt-dev] [PATCH i-g-t v8 3/6] tests/i915_pm_lpsp: lpsp platform agnostic support
Nautiyal, Ankit K
ankit.k.nautiyal at intel.com
Wed May 13 07:22:40 UTC 2020
LGTM.
Acked-by: Ankit Nautiyal <ankit.k.nautiyal at intel.com>
On 5/12/2020 4:04 PM, Anshuman Gupta wrote:
> Current implementation of lpsp igt test, assumed that every non-edp
> panel isn't a lpsp panel but it is not true on TGL anymore,
> any HDMI/DP/DSI panel connected on pipe A and connected to PORT_{A,B,C}
> can drive LPSP.
> Even on older Gen9 platform a DP panel can drive lpsp on Port A.
> This requires complete design change in current lpsp igt for a platform
> agnostic support.
>
> The new igt approach is relies on connector specific
> i915_lpsp_capability and i915_lpsp_status debugfs attributes,
> these debugfs exposes whether an output is capable of driving lpsp
> and lpsp is enabled.
>
> Nuking edp-native and non-edp test, introducing a new dynamic
> igt subtest kms-lpsp, which validates lpsp on each connected output
> and skip the subtest if output is not lpsp capable.
>
> Skip screens-disabled test for platform which support DC states.
> screens-disabled test is only valid for the platforms like HSW/BDW
> where PG1 is Always-ON power domain, so these platform test lpsp
> with all screen disabled i.e validate PG2 when all screen are
> disabled.
> DC state i.e DMC f/w supported platforms don't have any ROI to validate
> screens-disabled subtest as existing dc*-dpms i915_pm_dc
> subtest already validate it implicitly.
>
> v2:
> - CI failures fixup.
> v3:
> - removed unloading of snd_modules. [Martin]
> v4:
> - Don't test non-lpsp(if lpsp disabled), no ROI to test that.
> - nuke panel-fitter test.
> v5:
> - Added dynamic subtest and igt changes according to kernel
> debugfs i915_lpsp_status changes.
> v6:
> - Avoided pipe big joiner by using 4k or lesser mode,
> so igt will not fail when pipe big joiner patches will
> land to kernel.
> v7:
> - Combined [v6 4/6] patch to this patch, skip the screens-disabled
> subtest for DC state supported platforms. [Animesh]
> v8:
> - 4k mode correction 3840*2160 and for loop for available modes
> should iterate from c->modes[0]. [Ankit]
>
> Reviewed-by: Animesh Manna <animesh.manna at intel.com>
> Signed-off-by: Anshuman Gupta <anshuman.gupta at intel.com>
> ---
> tests/i915/i915_pm_lpsp.c | 313 ++++++++++++++++++--------------------
> 1 file changed, 147 insertions(+), 166 deletions(-)
>
> diff --git a/tests/i915/i915_pm_lpsp.c b/tests/i915/i915_pm_lpsp.c
> index 08f82e7c..0e9452fd 100644
> --- a/tests/i915/i915_pm_lpsp.c
> +++ b/tests/i915/i915_pm_lpsp.c
> @@ -25,210 +25,191 @@
> */
>
> #include "igt.h"
> +#include "igt_kmod.h"
> +#include "igt_pm.h"
> +#include "igt_sysfs.h"
> #include <sys/types.h>
> #include <sys/stat.h>
> #include <fcntl.h>
> #include <unistd.h>
>
> +#define MAX_SINK_LPSP_INFO_BUF_LEN 4096
>
> -static bool supports_lpsp(uint32_t devid)
> -{
> - return IS_HASWELL(devid) || IS_BROADWELL(devid);
> -}
> +#define PWR_DOMAIN_INFO "i915_power_domain_info"
>
> -static bool lpsp_is_enabled(int drm_fd)
> +typedef struct {
> + int drm_fd;
> + int debugfs_fd;
> + uint32_t devid;
> + char *pwr_dmn_info;
> + igt_display_t display;
> + struct igt_fb fb;
> + drmModeModeInfo *mode;
> + igt_output_t *output;
> +} data_t;
> +
> +static bool lpsp_is_enabled(data_t *data)
> {
> - uint32_t val;
> + char buf[MAX_SINK_LPSP_INFO_BUF_LEN];
> + int len;
>
> - val = INREG(HSW_PWR_WELL_CTL2);
> - return !(val & HSW_PWR_WELL_STATE_ENABLED);
> -}
> + len = igt_debugfs_simple_read(data->debugfs_fd, "i915_lpsp_status",
> + buf, sizeof(buf));
> + if (len < 0)
> + igt_assert_eq(len, -ENODEV);
>
> -/* The LPSP mode is all about an enabled pipe, but we expect to also be in the
> - * low power mode when no pipes are enabled, so do this check anyway. */
> -static void screens_disabled_subtest(int drm_fd, drmModeResPtr drm_res)
> -{
> - kmstest_unset_all_crtcs(drm_fd, drm_res);
> - igt_assert(lpsp_is_enabled(drm_fd));
> + igt_skip_on(strstr(buf, "LPSP: not supported"));
> +
> + return strstr(buf, "LPSP: enabled");
> }
>
> -static uint32_t create_fb(int drm_fd, int width, int height)
> +static bool dmc_supported(int debugfs)
> {
> - struct igt_fb fb;
> + char buf[15];
> + int len;
>
> - return igt_create_pattern_fb(drm_fd, width, height, DRM_FORMAT_XRGB8888,
> - LOCAL_DRM_FORMAT_MOD_NONE, &fb);
> + len = igt_sysfs_read(debugfs, "i915_dmc_info", buf, sizeof(buf) - 1);
> +
> + if (len < 0)
> + return false;
> + else
> + return true;
> }
>
> -static void edp_subtest(int drm_fd, drmModeResPtr drm_res,
> - drmModeConnectorPtr *drm_connectors, uint32_t devid,
> - bool use_panel_fitter)
> +/*
> + * The LPSP mode is all about an enabled pipe, but we expect to also be in the
> + * low power mode when no pipes are enabled, so do this check anyway.
> + */
> +static void screens_disabled_subtest(data_t *data)
> {
> - int i, rc;
> - uint32_t crtc_id = 0, buffer_id = 0;
> - drmModeConnectorPtr connector = NULL;
> - drmModeModeInfoPtr mode = NULL;
> - drmModeModeInfo std_1024_mode = {
> - .clock = 65000,
> - .hdisplay = 1024,
> - .hsync_start = 1048,
> - .hsync_end = 1184,
> - .htotal = 1344,
> - .hskew = 0,
> - .vdisplay = 768,
> - .vsync_start = 771,
> - .vsync_end = 777,
> - .vtotal = 806,
> - .vscan = 0,
> - .vrefresh = 60,
> - .flags = 0xA,
> - .type = 0x40,
> - .name = "Custom 1024x768",
> - };
> -
> - kmstest_unset_all_crtcs(drm_fd, drm_res);
> -
> - for (i = 0; i < drm_res->count_connectors; i++) {
> - drmModeConnectorPtr c = drm_connectors[i];
> -
> - if (c->connector_type != DRM_MODE_CONNECTOR_eDP)
> - continue;
> - if (c->connection != DRM_MODE_CONNECTED)
> - continue;
> -
> - if (!use_panel_fitter && c->count_modes) {
> - connector = c;
> - mode = &c->modes[0];
> - break;
> - }
> - if (use_panel_fitter) {
> - connector = c;
> -
> - /* This is one of the modes Xorg creates for panels, so
> - * it should work just fine. Notice that Gens that
> - * support LPSP are too new for panels with native
> - * 1024x768 resolution, so this should force the panel
> - * fitter. */
> - igt_assert(c->count_modes &&
> - c->modes[0].hdisplay > 1024);
> - igt_assert(c->count_modes &&
> - c->modes[0].vdisplay > 768);
> - mode = &std_1024_mode;
> - break;
> - }
> - }
> - igt_require(connector);
> -
> - crtc_id = kmstest_find_crtc_for_connector(drm_fd, drm_res, connector,
> - 0);
> - buffer_id = create_fb(drm_fd, mode->hdisplay, mode->vdisplay);
> -
> - igt_assert(buffer_id);
> - igt_assert(connector);
> - igt_assert(mode);
> -
> - rc = drmModeSetCrtc(drm_fd, crtc_id, buffer_id, 0, 0,
> - &connector->connector_id, 1, mode);
> - igt_assert_eq(rc, 0);
> -
> - if (use_panel_fitter) {
> - if (IS_HASWELL(devid))
> - igt_assert(!lpsp_is_enabled(drm_fd));
> - else
> - igt_assert(lpsp_is_enabled(drm_fd));
> - } else {
> - igt_assert(lpsp_is_enabled(drm_fd));
> + igt_output_t *output;
> + int valid_output = 0;
> + enum pipe pipe;
> +
> + for_each_pipe_with_single_output(&data->display, pipe, output) {
> + data->output = output;
> + igt_output_set_pipe(data->output, PIPE_NONE);
> + igt_display_commit(&data->display);
> + valid_output++;
> }
> +
> + igt_require_f(valid_output, "No connected output found\n");
> + igt_assert_f(lpsp_is_enabled(data), "lpsp is not enabled\n%s:\n%s\n",
> + PWR_DOMAIN_INFO, data->pwr_dmn_info =
> + igt_sysfs_get(data->debugfs_fd, PWR_DOMAIN_INFO));
> }
>
> -static void non_edp_subtest(int drm_fd, drmModeResPtr drm_res,
> - drmModeConnectorPtr *drm_connectors)
> +static void setup_lpsp_output(data_t *data)
> {
> - int i, rc;
> - uint32_t crtc_id = 0, buffer_id = 0;
> - drmModeConnectorPtr connector = NULL;
> - drmModeModeInfoPtr mode = NULL;
> -
> - kmstest_unset_all_crtcs(drm_fd, drm_res);
> -
> - for (i = 0; i < drm_res->count_connectors; i++) {
> - drmModeConnectorPtr c = drm_connectors[i];
> + igt_plane_t *primary;
> +
> + /* set output pipe = PIPE_A for LPSP */
> + igt_output_set_pipe(data->output, PIPE_A);
> + primary = igt_output_get_plane_type(data->output,
> + DRM_PLANE_TYPE_PRIMARY);
> + igt_plane_set_fb(primary, NULL);
> + igt_create_pattern_fb(data->drm_fd,
> + data->mode->hdisplay, data->mode->vdisplay,
> + DRM_FORMAT_XRGB8888,
> + LOCAL_DRM_FORMAT_MOD_NONE,
> + &data->fb);
> + igt_plane_set_fb(primary, &data->fb);
> + igt_display_commit(&data->display);
> +}
>
> - if (c->connector_type == DRM_MODE_CONNECTOR_eDP)
> - continue;
> - if (c->connection != DRM_MODE_CONNECTED)
> - continue;
> +static void test_cleanup(data_t *data)
> +{
> + igt_plane_t *primary;
> +
> + if (!data->output || data->output->pending_pipe == PIPE_NONE)
> + return;
> +
> + primary = igt_output_get_plane_type(data->output,
> + DRM_PLANE_TYPE_PRIMARY);
> + igt_plane_set_fb(primary, NULL);
> + igt_output_set_pipe(data->output, PIPE_NONE);
> + igt_display_commit(&data->display);
> + igt_remove_fb(data->drm_fd, &data->fb);
> + data->output = NULL;
> +}
>
> - if (c->count_modes) {
> - connector = c;
> - mode = &c->modes[0];
> - break;
> +static void test_lpsp(data_t *data)
> +{
> + drmModeConnectorPtr c = data->output->config.connector;
> + int i;
> +
> + /* LPSP is low power single pipe usages i.e. PIPE_A */
> + igt_require(igt_pipe_connector_valid(PIPE_A, data->output));
> + igt_require_f(i915_output_is_lpsp_capable(data->drm_fd, data->output),
> + "output is not lpsp capable\n");
> +
> + data->mode = igt_output_get_mode(data->output);
> +
> + /* For LPSP avoid pipe big joiner by atleast 4k mode */
> + if (data->mode->hdisplay > 3840 && data->mode->vdisplay > 2160)
> + for (i = 0; i < c->count_modes; i++) {
> + if (c->modes[i].hdisplay <= 3840 &&
> + c->modes[i].vdisplay <= 2160) {
> + data->mode = &c->modes[i];
> + igt_output_override_mode(data->output,
> + data->mode);
> + break;
> + }
> }
> - }
> - igt_require(connector);
> -
> - crtc_id = kmstest_find_crtc_for_connector(drm_fd, drm_res, connector,
> - 0);
> - buffer_id = create_fb(drm_fd, mode->hdisplay, mode->vdisplay);
> -
> - igt_assert(buffer_id);
> - igt_assert(mode);
>
> - rc = drmModeSetCrtc(drm_fd, crtc_id, buffer_id, 0, 0,
> - &connector->connector_id, 1, mode);
> - igt_assert_eq(rc, 0);
> + igt_require(data->mode->hdisplay <= 3840 &&
> + data->mode->vdisplay <= 2160);
>
> - igt_assert(!lpsp_is_enabled(drm_fd));
> + setup_lpsp_output(data);
> + igt_assert_f(lpsp_is_enabled(data), "%s: lpsp is not enabled\n%s:\n%s\n",
> + data->output->name, PWR_DOMAIN_INFO, data->pwr_dmn_info =
> + igt_sysfs_get(data->debugfs_fd, PWR_DOMAIN_INFO));
> }
>
> -#define MAX_CONNECTORS 32
> -
> -int drm_fd;
> -uint32_t devid;
> -drmModeResPtr drm_res;
> -drmModeConnectorPtr drm_connectors[MAX_CONNECTORS];
> -struct intel_mmio_data mmio_data;
> +IGT_TEST_DESCRIPTION("These tests validates display Low Power Single Pipe configurations");
> igt_main
> {
> - igt_fixture {
> - int i;
> -
> - drm_fd = drm_open_driver_master(DRIVER_INTEL);
> - igt_require(drm_fd >= 0);
> -
> - devid = intel_get_drm_devid(drm_fd);
> -
> - drm_res = drmModeGetResources(drm_fd);
> - igt_require(drm_res);
> - igt_assert(drm_res->count_connectors <= MAX_CONNECTORS);
> + data_t data = {};
>
> - for (i = 0; i < drm_res->count_connectors; i++)
> - drm_connectors[i] = drmModeGetConnectorCurrent(drm_fd,
> - drm_res->connectors[i]);
> + igt_fixture {
>
> + data.drm_fd = drm_open_driver_master(DRIVER_INTEL);
> + igt_require(data.drm_fd >= 0);
> + data.debugfs_fd = igt_debugfs_dir(data.drm_fd);
> + igt_require(data.debugfs_fd >= 0);
> igt_pm_enable_audio_runtime_pm();
> + kmstest_set_vt_graphics_mode();
> + data.devid = intel_get_drm_devid(data.drm_fd);
> + igt_display_require(&data.display, data.drm_fd);
> + igt_require(igt_pm_dmc_loaded(data.debugfs_fd));
> + }
>
> - igt_require(supports_lpsp(devid));
> + igt_describe("This test validates lpsp while all crtc are disabled");
> + igt_subtest("screens-disabled") {
> + igt_require_f(!dmc_supported(data.debugfs_fd),
> + "DC states supported platform don't have ROI for this subtest\n");
> + screens_disabled_subtest(&data);
> + }
>
> - intel_register_access_init(&mmio_data, intel_get_pci_device(), 0, drm_fd);
> + igt_describe("This test validates lpsp on all connected outputs on low power PIPE_A");
> + igt_subtest_with_dynamic_f("kms-lpsp") {
> + igt_display_t *display = &data.display;
> + igt_output_t *output;
>
> - kmstest_set_vt_graphics_mode();
> - }
> + for_each_connected_output(display, output) {
> + igt_dynamic_f("kms-lpsp-%s",
> + kmstest_connector_type_str(output->config.connector->connector_type)) {
> + data.output = output;
> + test_lpsp(&data);
> + }
>
> - igt_subtest("screens-disabled")
> - screens_disabled_subtest(drm_fd, drm_res);
> - igt_subtest("edp-native")
> - edp_subtest(drm_fd, drm_res, drm_connectors, devid, false);
> - igt_subtest("non-edp")
> - non_edp_subtest(drm_fd, drm_res, drm_connectors);
> + test_cleanup(&data);
> + }
> + }
>
> igt_fixture {
> - int i;
> -
> - intel_register_access_fini(&mmio_data);
> - for (i = 0; i < drm_res->count_connectors; i++)
> - drmModeFreeConnector(drm_connectors[i]);
> - drmModeFreeResources(drm_res);
> - close(drm_fd);
> + free(data.pwr_dmn_info);
> + close(data.drm_fd);
> + igt_display_fini(&data.display);
> }
> }
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/igt-dev/attachments/20200513/5ceccc1b/attachment.htm>
More information about the igt-dev
mailing list