[igt-dev] [PATCH i-g-t v3 1/2] tests/kms_content_protection: Add MST subtests
Anshuman Gupta
anshuman.gupta at intel.com
Tue Nov 10 09:41:07 UTC 2020
On 2020-11-03 at 13:56:27 +0530, Karthik B S wrote:
> Add subtests to verify content protection simultaneously on
> multiple outputs on the same MST topology.
>
> v3: -Remove the logging which are no longer required. (Anshuman)
> -Add logic to verify that CP is still enabled on other connectors
> while disabling it on one of the connectors. (Anshuman)
overall test content looks good to me, there are some comments below,
>
> Signed-off-by: Anshuman Gupta <anshuman.gupta at intel.com>
> Signed-off-by: Karthik B S <karthik.b.s at intel.com>
> ---
> tests/kms_content_protection.c | 234 ++++++++++++++++++++++++++++++++-
> 1 file changed, 233 insertions(+), 1 deletion(-)
>
> diff --git a/tests/kms_content_protection.c b/tests/kms_content_protection.c
> index 303ed418..cb895a72 100644
> --- a/tests/kms_content_protection.c
> +++ b/tests/kms_content_protection.c
> @@ -42,6 +42,12 @@ struct data {
> struct udev_monitor *uevent_monitor;
> } data;
>
> +typedef struct {
> + float red;
> + float green;
> + float blue;
> +} color_t;
> +
> /* Test flags */
> #define CP_DPMS (1 << 0)
> #define CP_LIC (1 << 1)
> @@ -457,6 +463,54 @@ static bool sink_hdcp2_capable(igt_output_t *output)
>
> return strstr(buf, "HDCP2.2");
> }
> +color_t red = { 1.0f, 0.0f, 0.0f };
> +color_t green = { 0.0f, 0.1f, 0.0f };
> +
> +static void prepare_modeset_on_mst_output(igt_output_t *output, enum pipe pipe)
> +{
> + drmModeConnectorPtr c = output->config.connector;
> + igt_display_t *display = &data.display;
> + drmModeModeInfo *mode;
> + igt_plane_t *primary;
> + int i;
> +
> + mode = igt_output_get_mode(output);
> +
> + /*
> + * TODO: Add logic to use the highest possible modes on each output.
> + * Currently using 2k modes by default on all the outputs.
> + */
> + igt_debug("Before mode override: Output %s Mode hdisplay %d Mode vdisplay %d\n",
> + output->name, mode->hdisplay, mode->vdisplay);
> +
> + if (mode->hdisplay > 1920 && mode->vdisplay > 1080) {
> + for (i = 0; i < c->count_modes; i++) {
> + if (c->modes[i].hdisplay <= 1920 && c->modes[i].vdisplay <= 1080) {
> + mode = &c->modes[i];
> + igt_output_override_mode(output, mode);
> + break;
> + }
> + }
> + }
> +
> + igt_debug("After mode overide: Output %s Mode hdisplay %d Mode vdisplay %d\n",
> + output->name, mode->hdisplay, mode->vdisplay);
> +
> + if (pipe % 2) {
> + igt_create_color_fb(display->drm_fd, mode->hdisplay, mode->vdisplay,
> + DRM_FORMAT_XRGB8888, LOCAL_DRM_FORMAT_MOD_NONE,
> + red.red, red.blue, red.green, &data.red);
> + } else {
> + igt_create_color_fb(display->drm_fd, mode->hdisplay, mode->vdisplay,
> + DRM_FORMAT_XRGB8888, LOCAL_DRM_FORMAT_MOD_NONE,
> + green.red, green.blue, green.green, &data.green);
> + }
> +
> + igt_output_set_pipe(output, pipe);
> + primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
> + igt_plane_set_fb(primary, NULL);
> + igt_plane_set_fb(primary, pipe % 2 ? &data.red : &data.green);
> +}
>
> static void
> test_content_protection(enum igt_commit_style s, int content_type)
> @@ -496,6 +550,162 @@ test_content_protection(enum igt_commit_style s, int content_type)
> igt_require_f(valid_tests, "No connector found with HDCP capability\n");
> }
>
> +static bool is_output_support_cp_capable(igt_output_t *output, int content_type)
is_output_support_hdcp_capable suits more.
could please avoid code duplication of is_output_support_cp_capable() in test_content_protection().
> +{
> + if (!output->props[IGT_CONNECTOR_CONTENT_PROTECTION])
> + return false;
> +
> + if (!output->props[IGT_CONNECTOR_HDCP_CONTENT_TYPE] &&
> + content_type)
> + return false;
> +
> + if (content_type && !sink_hdcp2_capable(output)) {
> + igt_info("\tSkip %s (Sink has no HDCP2.2 support)\n",
> + output->name);
> + return false;
> + } else if (!sink_hdcp_capable(output)) {
> + igt_info("\tSkip %s (Sink has no HDCP support)\n",
> + output->name);
> + return false;
> + }
> +
> + return true;
> +}
> +
> +static int parse_path_blob(char *blob_data)
> +{
> + int connector_id;
> + char *encoder;
> +
> + encoder = strtok(blob_data, ":");
> + igt_assert_f(!strcmp(encoder, "mst"), "PATH connector property expected to have 'mst'\n");
> +
> + connector_id = atoi(strtok(NULL, "-"));
> +
> + return connector_id;
> +}
> +
> +static bool is_dp_mst_output(igt_output_t *output, int i)
> +{
> + drmModePropertyBlobPtr path_blob = NULL;
> + uint64_t path_blob_id;
> + drmModeConnector *connector = output->config.connector;
> + struct kmstest_connector_config config;
> + const char *encoder;
> + int connector_id;
> + static int prev_connector_id;
> +
> + kmstest_get_connector_config(data.drm_fd, output->config.connector->connector_id, -1, &config);
> + encoder = kmstest_encoder_type_str(config.encoder->encoder_type);
> +
> + if (strcmp(encoder, "DP MST"))
> + return false;
> +
> + igt_assert(kmstest_get_property(data.drm_fd, connector->connector_id,
> + DRM_MODE_OBJECT_CONNECTOR, "PATH", NULL,
> + &path_blob_id, NULL));
> +
> + igt_assert(path_blob = drmModeGetPropertyBlob(data.drm_fd, path_blob_id));
> +
> + connector_id = parse_path_blob((char *) path_blob->data);
> +
> + /* Check if all the MST outputs are in the same topology */
Add some comment like, we are discarding outputs of other DP MST topology.
We are testing only on outputs which topology we found out first.
> + if (i == 0) {
> + prev_connector_id = connector_id;
> + } else {
> + if (connector_id != prev_connector_id)
> + return false;
> + }
> +
> + drmModeFreePropertyBlob(path_blob);
> +
> + return true;
> +}
> +
> +static void
> +test_content_protection_mst(int content_type)
> +{
> + igt_display_t *display = &data.display;
> + igt_output_t *output;
> + int valid_outputs = 0, ret, count, max_pipe = 0, i;
> + enum pipe pipe;
> + igt_output_t *mst_output[IGT_MAX_PIPES];
> +
> + for_each_connected_output(display, output) {
> + if (!is_dp_mst_output(output, valid_outputs))
> + continue;
> +
> + if (!is_output_support_cp_capable(output, content_type))
> + continue;
> +
> + mst_output[valid_outputs] = output;
> + valid_outputs++;
> + }
> +
> + igt_require_f(valid_outputs > 1, "No DP MST set up with >= 2 outputs found in a single topology\n");
> +
> + for_each_pipe(display, pipe)
> + max_pipe++;
> +
> + if (valid_outputs > max_pipe)
> + valid_outputs = max_pipe;
> +
> + pipe = PIPE_A;
> +
> + for (count = 0; count < valid_outputs; count++) {
> + igt_assert_f(igt_pipe_connector_valid(pipe, mst_output[count]), "Output-pipe combination invalid\n");
> +
> + prepare_modeset_on_mst_output(mst_output[count], pipe);
> + pipe++;
> + }
> +
> + igt_display_commit2(display, COMMIT_ATOMIC);
> +
> + for (count = 0; count < valid_outputs; count++) {
> + igt_output_set_prop_value(mst_output[count], IGT_CONNECTOR_CONTENT_PROTECTION, CP_DESIRED);
> +
> + if (output->props[IGT_CONNECTOR_HDCP_CONTENT_TYPE])
> + igt_output_set_prop_value(mst_output[count], IGT_CONNECTOR_HDCP_CONTENT_TYPE, content_type);
> + }
> +
> + igt_display_commit2(display, COMMIT_ATOMIC);
> +
> + for (count = 0; count < valid_outputs; count++) {
> + igt_debug("Test CP Prop to be ENABLED %s\n", mst_output[count]->name);
> + ret = wait_for_prop_value(mst_output[count], CP_ENABLED, KERNEL_AUTH_TIME_ALLOWED_MSEC);
> + igt_assert_f(ret, "Content Protection not enabled output %s\n", mst_output[count]->name);
> +
> + if (data.cp_tests & CP_LIC)
> + test_cp_lic(mst_output[count]);
> + }
> +
> + for (count = 0; count < valid_outputs; count++) {
> + igt_debug("Test CP Prop to be ENABLED %s\n", mst_output[count]->name);
> + ret = wait_for_prop_value(mst_output[count], CP_ENABLED, KERNEL_AUTH_TIME_ALLOWED_MSEC);
> + igt_assert_f(ret, "Content Protection not enabled output %s\n", mst_output[count]->name);
I belive we don't reqire above HDCP check hunk, we want to disbale the HDCP and check it on other
DP_MST outputs.
> +
> + igt_debug("CP Prop being UNDESIRED on %s\n", mst_output[count]->name);
> + test_cp_disable(mst_output[count], COMMIT_ATOMIC);
> +
> + /* CP is expected to be still enabled on other outputs*/
> + for (i = 0; i < valid_outputs; i++) {
> + if (i == count)
> + continue;
> +
> + igt_debug("Test CP Prop to be ENABLED %s\n", mst_output[i]->name);
> + ret = wait_for_prop_value(mst_output[i], CP_ENABLED, KERNEL_AUTH_TIME_ALLOWED_MSEC);
> + igt_assert_f(ret, "Content Protection not enabled output %s\n", mst_output[i]->name);
Let's also check link on output on which HDCP enabled when HDCP was disabled other DP MST output
if (data.cp_tests & CP_LIC)
test_cp_lic(mst_output[count]);
> + }
> +
> + igt_output_set_prop_value(mst_output[count], IGT_CONNECTOR_CONTENT_PROTECTION, CP_DESIRED);
> +
> + if (output->props[IGT_CONNECTOR_HDCP_CONTENT_TYPE])
> + igt_output_set_prop_value(mst_output[count], IGT_CONNECTOR_HDCP_CONTENT_TYPE, content_type);
> +
> + igt_display_commit2(display, COMMIT_ATOMIC);
> + }
> +}
> +
> static void test_content_protection_cleanup(void)
> {
> igt_display_t *display = &data.display;
> @@ -511,7 +721,7 @@ static void test_content_protection_cleanup(void)
> if (val == CP_UNDESIRED)
> continue;
>
> - igt_info("CP Prop being UNDESIRED on %s\n", output->name);
> + igt_debug("CP Prop being UNDESIRED on %s\n", output->name);
This is unwanted change.
Thanks,
Anshuman Gupta.
> test_cp_disable(output, COMMIT_ATOMIC);
> }
> }
> @@ -592,6 +802,28 @@ igt_main
> test_content_protection(COMMIT_ATOMIC, HDCP_CONTENT_TYPE_0);
> }
>
> + igt_describe("Test Content protection over DP MST");
> + igt_subtest("dp-mst-type-0") {
> + test_content_protection_mst(HDCP_CONTENT_TYPE_0);
> + }
> +
> + igt_describe("Test Content protection over DP MST with LIC");
> + igt_subtest("dp-mst-lic-type-0") {
> + data.cp_tests = CP_LIC;
> + test_content_protection_mst(HDCP_CONTENT_TYPE_0);
> + }
> +
> + igt_describe("Test Content protection over DP MST");
> + igt_subtest("dp-mst-type-1") {
> + test_content_protection_mst(HDCP_CONTENT_TYPE_1);
> + }
> +
> + igt_describe("Test Content protection over DP MST with LIC");
> + igt_subtest("dp-mst-lic-type-1") {
> + data.cp_tests = CP_LIC;
> + test_content_protection_mst(HDCP_CONTENT_TYPE_1);
> + }
> +
> igt_fixture {
> test_content_protection_cleanup();
> igt_display_fini(&data.display);
> --
> 2.22.0
>
More information about the igt-dev
mailing list